From: Fawzi Khaber <fawzi.khaber@xxxxxxx> This register write to REG_INTF_CONFIG6 enables a spike filter that is impacting the line and can prevent the I2C ACK to be seen by the controller. So we don't test the return value. Signed-off-by: Fawzi Khaber <fawzi.khaber@xxxxxxx> --- drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c index 33d9afb1ba91..9c1e373a5daf 100644 --- a/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c @@ -18,12 +18,16 @@ static int inv_icm42600_i2c_bus_setup(struct inv_icm42600_state *st) unsigned int mask, val; int ret; - /* setup interface registers */ - ret = regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG6, + /* + * setup interface registers + * This register write to REG_INTF_CONFIG6 enables a spike filter that + * is impacting the line and can prevent the I2C ACK to be seen by the + * controller. So we don't test the return value. + */ + regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG6, INV_ICM42600_INTF_CONFIG6_MASK, INV_ICM42600_INTF_CONFIG6_I3C_EN); - if (ret) - return ret; + ret = regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG4, INV_ICM42600_INTF_CONFIG4_I3C_BUS_ONLY, 0); -- 2.25.1
