On Sun, 27 Mar 2022 16:53:36 +0100
Jonathan Cameron <jic23@xxxxxxxxxx> wrote:
> On Sun, 27 Mar 2022 08:40:05 -0700
> Tong Zhang <ztong0001@xxxxxxxxx> wrote:
>
> > Regulator should be disabled in error path as mentioned in _regulator_put().
> > Also disable accel if gyro cannot be enabled.
> >
> > [ 16.233604] WARNING: CPU: 0 PID: 2177 at drivers/regulator/core.c:2257 _regulator_put
> > [ 16.240453] Call Trace:
> > [ 16.240572] <TASK>
> > [ 16.240676] regulator_put+0x26/0x40
> > [ 16.240853] regulator_bulk_free+0x26/0x50
> > [ 16.241050] release_nodes+0x3f/0x70
> > [ 16.241225] devres_release_group+0x147/0x1c0
> > [ 16.241441] ? bmi160_core_probe+0x175/0x3a0 [bmi160_core]
> >
> > Fixes: 5dea3fb066f0 ("iio: imu: bmi160: added regulator support")
> > Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> > Signed-off-by: Tong Zhang <ztong0001@xxxxxxxxx>
> oops. Raced with you ;)
>
> Anyhow, I added the tag, so no problem.
on closer inspection b4 was clever and picked v3 up anyway.
J
>
> Jonathan
>
> > ---
> > v2: also disable accel when gyro fail to enable
> > v3: add tag
> > drivers/iio/imu/bmi160/bmi160_core.c | 20 ++++++++++++++------
> > 1 file changed, 14 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/iio/imu/bmi160/bmi160_core.c b/drivers/iio/imu/bmi160/bmi160_core.c
> > index 824b5124a5f5..01336105792e 100644
> > --- a/drivers/iio/imu/bmi160/bmi160_core.c
> > +++ b/drivers/iio/imu/bmi160/bmi160_core.c
> > @@ -730,7 +730,7 @@ static int bmi160_chip_init(struct bmi160_data *data, bool use_spi)
> >
> > ret = regmap_write(data->regmap, BMI160_REG_CMD, BMI160_CMD_SOFTRESET);
> > if (ret)
> > - return ret;
> > + goto disable_regulator;
> >
> > usleep_range(BMI160_SOFTRESET_USLEEP, BMI160_SOFTRESET_USLEEP + 1);
> >
> > @@ -741,29 +741,37 @@ static int bmi160_chip_init(struct bmi160_data *data, bool use_spi)
> > if (use_spi) {
> > ret = regmap_read(data->regmap, BMI160_REG_DUMMY, &val);
> > if (ret)
> > - return ret;
> > + goto disable_regulator;
> > }
> >
> > ret = regmap_read(data->regmap, BMI160_REG_CHIP_ID, &val);
> > if (ret) {
> > dev_err(dev, "Error reading chip id\n");
> > - return ret;
> > + goto disable_regulator;
> > }
> > if (val != BMI160_CHIP_ID_VAL) {
> > dev_err(dev, "Wrong chip id, got %x expected %x\n",
> > val, BMI160_CHIP_ID_VAL);
> > - return -ENODEV;
> > + ret = -ENODEV;
> > + goto disable_regulator;
> > }
> >
> > ret = bmi160_set_mode(data, BMI160_ACCEL, true);
> > if (ret)
> > - return ret;
> > + goto disable_regulator;
> >
> > ret = bmi160_set_mode(data, BMI160_GYRO, true);
> > if (ret)
> > - return ret;
> > + goto disable_accel;
> >
> > return 0;
> > +
> > +disable_accel:
> > + bmi160_set_mode(data, BMI160_ACCEL, false);
> > +
> > +disable_regulator:
> > + regulator_bulk_disable(ARRAY_SIZE(data->supplies), data->supplies);
> > + return ret;
> > }
> >
> > static int bmi160_data_rdy_trigger_set_state(struct iio_trigger *trig,
>
