Quoting Gwendal Grignou (2022-03-21 23:24:59) > Allow configure the resistance used during precharge. > > Signed-off-by: Gwendal Grignou <gwendal@xxxxxxxxxxxx> > --- > Changes since v1: > - Suffix field with kOhms unit. > > .../bindings/iio/proximity/semtech,sx9324.yaml | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml > index b8a6ee16854ff..8fbea71823e76 100644 > --- a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml > +++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml > @@ -126,6 +126,14 @@ properties: > UINT_MAX (4294967295) represents infinite. Other values > represent 1-1/N. > > + semtech,input-precharge-resistor-kohms: What didn't work about using ohms? I think the goal was to use a standard unit and then scale it up in the binding and in the driver so that we didn't have to have a $ref below. > + $ref: /schemas/types.yaml#/definitions/uint32 > + default: 4 > + description: > + Pre-charge input resistance in kOhm. > + minimum: 0 > + maximum: 30 > + > required: > - compatible > - reg > @@ -157,5 +165,6 @@ examples: > semtech,ph01-proxraw-strength = <2>; > semtech,ph23-proxraw-strength = <2>; > semtech,avg-pos-strength = <64>; > + semtech,input-precharge-resistor-kohms = <2>; > }; > }; > -- > 2.35.1.894.gb6a874cedc-goog >
