On Tue, 15 Mar 2022 13:05:38 -0700 Stephen Boyd <swboyd@xxxxxxxxxxxx> wrote: > Quoting Gwendal Grignou (2022-03-15 10:30:37) > > Allow configure the resistance used during precharge. > > > > Signed-off-by: Gwendal Grignou <gwendal@xxxxxxxxxxxx> > > --- > > .../bindings/iio/proximity/semtech,sx9324.yaml | 9 +++++++++ > > 1 file changed, 9 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml > > index b8a6ee16854ff..cd8ed50f2882a 100644 > > --- a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml > > +++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml > > @@ -126,6 +126,14 @@ properties: > > UINT_MAX (4294967295) represents infinite. Other values > > represent 1-1/N. > > > > + semtech,input-precharge-resistor: > > It is clearer when the units are in the name of the property. > > semtech,input-precharge-resistor-kohms Added bonus is that you won't need the ref if the units chosen match one of the ones in https://github.com/robherring/dt-schema/blob/master/schemas/property-units.yaml Note kohms isn't there so unless we have an issue representing this in ohms, please use that instead. Jonathan
