Re: [PATCH v5 1/7] iio: potentiometer: Alignment to match the open parenthesis

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 23 Feb 2022 22:05:19 +0530
Jagath Jog J <jagathjog1996@xxxxxxxxx> wrote:

> Fix following checkpatch.pl check by removing blank space.
> CHECK: Alignment should match open parenthesis.
> 
> Signed-off-by: Jagath Jog J <jagathjog1996@xxxxxxxxx>
I didn't noticed before, but for future please put the driver name
in the patch titles!

iio: potentiometer: ds1803: xxxx

I'll fix up.

> ---
>  drivers/iio/potentiometer/ds1803.c | 13 ++++++-------
>  1 file changed, 6 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/iio/potentiometer/ds1803.c b/drivers/iio/potentiometer/ds1803.c
> index 20b45407eaac..3c542a50ece6 100644
> --- a/drivers/iio/potentiometer/ds1803.c
> +++ b/drivers/iio/potentiometer/ds1803.c
> @@ -55,8 +55,8 @@ static const struct iio_chan_spec ds1803_channels[] = {
>  };
>  
>  static int ds1803_read_raw(struct iio_dev *indio_dev,
> -			    struct iio_chan_spec const *chan,
> -			    int *val, int *val2, long mask)
> +			   struct iio_chan_spec const *chan,
> +			   int *val, int *val2, long mask)
>  {
>  	struct ds1803_data *data = iio_priv(indio_dev);
>  	int pot = chan->channel;
> @@ -66,7 +66,7 @@ static int ds1803_read_raw(struct iio_dev *indio_dev,
>  	switch (mask) {
>  	case IIO_CHAN_INFO_RAW:
>  		ret = i2c_master_recv(data->client, result,
> -				indio_dev->num_channels);
> +				      indio_dev->num_channels);
>  		if (ret < 0)
>  			return ret;
>  
> @@ -83,8 +83,8 @@ static int ds1803_read_raw(struct iio_dev *indio_dev,
>  }
>  
>  static int ds1803_write_raw(struct iio_dev *indio_dev,
> -			     struct iio_chan_spec const *chan,
> -			     int val, int val2, long mask)
> +			    struct iio_chan_spec const *chan,
> +			    int val, int val2, long mask)
>  {
>  	struct ds1803_data *data = iio_priv(indio_dev);
>  	int pot = chan->channel;
> @@ -109,8 +109,7 @@ static const struct iio_info ds1803_info = {
>  	.write_raw = ds1803_write_raw,
>  };
>  
> -static int ds1803_probe(struct i2c_client *client,
> -			 const struct i2c_device_id *id)
> +static int ds1803_probe(struct i2c_client *client, const struct i2c_device_id *id)
>  {
>  	struct device *dev = &client->dev;
>  	struct ds1803_data *data;




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux