[PATCH v1 1/8] iio: accel: adxl345: Convert to use dev_err_probe()

[Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>]

It's fine to call dev_err_probe() in ->probe() when error code is known.
Convert the driver to use dev_err_probe().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
 drivers/iio/accel/adxl345_core.c | 26 +++++++++-----------------
 drivers/iio/accel/adxl345_i2c.c  |  7 ++-----
 drivers/iio/accel/adxl345_spi.c  | 14 ++++----------
 3 files changed, 15 insertions(+), 32 deletions(-)

diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c
index ef2240e356e0..078e1029e49d 100644
--- a/drivers/iio/accel/adxl345_core.c
+++ b/drivers/iio/accel/adxl345_core.c
@@ -222,16 +222,12 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap,
 	int ret;
 
 	ret = regmap_read(regmap, ADXL345_REG_DEVID, &regval);
-	if (ret < 0) {
-		dev_err(dev, "Error reading device ID: %d\n", ret);
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Error reading device ID\n");
 
-	if (regval != ADXL345_DEVID) {
-		dev_err(dev, "Invalid device ID: %x, expected %x\n",
-			regval, ADXL345_DEVID);
-		return -ENODEV;
-	}
+	if (regval != ADXL345_DEVID)
+		return dev_err_probe(dev, -ENODEV, "Invalid device ID: %x, expected %x\n",
+				     regval, ADXL345_DEVID);
 
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
 	if (!indio_dev)
@@ -245,10 +241,8 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap,
 
 	ret = regmap_write(data->regmap, ADXL345_REG_DATA_FORMAT,
 			   data->data_range);
-	if (ret < 0) {
-		dev_err(dev, "Failed to set data range: %d\n", ret);
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Failed to set data range\n");
 
 	indio_dev->name = name;
 	indio_dev->info = &adxl345_info;
@@ -259,10 +253,8 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap,
 	/* Enable measurement mode */
 	ret = regmap_write(data->regmap, ADXL345_REG_POWER_CTL,
 			   ADXL345_POWER_CTL_MEASURE);
-	if (ret < 0) {
-		dev_err(dev, "Failed to enable measurement mode: %d\n", ret);
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Failed to enable measurement mode\n");
 
 	ret = devm_add_action_or_reset(dev, adxl345_powerdown, data->regmap);
 	if (ret < 0)
diff --git a/drivers/iio/accel/adxl345_i2c.c b/drivers/iio/accel/adxl345_i2c.c
index 7bc8324c4f07..d6dd715bf404 100644
--- a/drivers/iio/accel/adxl345_i2c.c
+++ b/drivers/iio/accel/adxl345_i2c.c
@@ -28,11 +28,8 @@ static int adxl345_i2c_probe(struct i2c_client *client,
 		return -ENODEV;
 
 	regmap = devm_regmap_init_i2c(client, &adxl345_i2c_regmap_config);
-	if (IS_ERR(regmap)) {
-		dev_err(&client->dev, "Error initializing i2c regmap: %ld\n",
-			PTR_ERR(regmap));
-		return PTR_ERR(regmap);
-	}
+	if (IS_ERR(regmap))
+		return dev_err_probe(&spi->dev, PTR_ERR(regmap), "Error initializing regmap\n");
 
 	return adxl345_core_probe(&client->dev, regmap, id->driver_data,
 				  id->name);
diff --git a/drivers/iio/accel/adxl345_spi.c b/drivers/iio/accel/adxl345_spi.c
index c752562c5d3b..6984b13f32e8 100644
--- a/drivers/iio/accel/adxl345_spi.c
+++ b/drivers/iio/accel/adxl345_spi.c
@@ -26,18 +26,12 @@ static int adxl345_spi_probe(struct spi_device *spi)
 	struct regmap *regmap;
 
 	/* Bail out if max_speed_hz exceeds 5 MHz */
-	if (spi->max_speed_hz > ADXL345_MAX_SPI_FREQ_HZ) {
-		dev_err(&spi->dev, "SPI CLK, %d Hz exceeds 5 MHz\n",
-			spi->max_speed_hz);
-		return -EINVAL;
-	}
+	if (spi->max_speed_hz > ADXL345_MAX_SPI_FREQ_HZ)
+		return dev_err_probe(&spi->dev, -EINVAL, "SPI CLK, %d Hz exceeds 5 MHz\n", spi->max_speed_hz);
 
 	regmap = devm_regmap_init_spi(spi, &adxl345_spi_regmap_config);
-	if (IS_ERR(regmap)) {
-		dev_err(&spi->dev, "Error initializing spi regmap: %ld\n",
-			PTR_ERR(regmap));
-		return PTR_ERR(regmap);
-	}
+	if (IS_ERR(regmap))
+		return dev_err_probe(&spi->dev, PTR_ERR(regmap), "Error initializing regmap\n");
 
 	return adxl345_core_probe(&spi->dev, regmap, id->driver_data, id->name);
 }
-- 
2.34.1