Add device tree bindings for the ADMV1014 Upconverter. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> --- changes in v7: - add Reviewed-by tag .../bindings/iio/frequency/adi,admv1014.yaml | 137 ++++++++++++++++++ 1 file changed, 137 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml new file mode 100644 index 000000000000..fe352c01dd94 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/frequency/adi,admv1014.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADMV1014 Microwave Downconverter + +maintainers: + - Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx> + +description: | + Wideband, microwave downconverter optimized for point to point microwave + radio designs operating in the 24 GHz to 44 GHz frequency range. + + https://www.analog.com/en/products/admv1014.html + +properties: + compatible: + enum: + - adi,admv1014 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 1000000 + + clocks: + minItems: 1 + + clock-names: + items: + - const: lo_in + description: + External clock that provides the Local Oscilator input. + + vcm-supply: + description: + Common-mode voltage regulator. + + vcc-if-bb-supply: + description: + BB and IF supply voltage regulator. + + vcc-vga-supply: + description: + RF Amplifier supply voltage regulator. + + vcc-vva-supply: + description: + VVA Control Circuit supply voltage regulator. + + vcc-lna-3p3-supply: + description: + Low Noise Amplifier 3.3V supply voltage regulator. + + vcc-lna-1p5-supply: + description: + Low Noise Amplifier 1.5V supply voltage regulator. + + vcc-bg-supply: + description: + Band Gap Circuit supply voltage regulator. + + vcc-quad-supply: + description: + Quadruple supply voltage regulator. + + vcc-mixer-supply: + description: + Mixer supply voltage regulator. + + adi,input-mode: + description: + Select the input mode. + iq - in-phase quadrature (I/Q) input + if - complex intermediate frequency (IF) input + enum: [iq, if] + + adi,detector-enable: + description: + Digital Rx Detector Enable. The Square Law Detector output is + available at output pin VDET. + type: boolean + + adi,p1db-compensation-enable: + description: + Turn on bits to optimize P1dB. + type: boolean + + adi,quad-se-mode: + description: + Switch the LO path from differential to single-ended operation. + se-neg - Single-Ended Mode, Negative Side Disabled. + se-pos - Single-Ended Mode, Positive Side Disabled. + diff - Differential Mode. + enum: [se-neg, se-pos, diff] + + '#clock-cells': + const: 0 + +required: + - compatible + - reg + - clocks + - clock-names + - vcm-supply + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + admv1014@0{ + compatible = "adi,admv1014"; + reg = <0>; + spi-max-frequency = <1000000>; + clocks = <&admv1014_lo>; + clock-names = "lo_in"; + vcm-supply = <&vcm>; + vcc-if-bb-supply = <&vcc_if_bb>; + vcc-vga-supply = <&vcc_vga>; + vcc-vva-supply = <&vcc_vva>; + vcc-lna-3p3-supply = <&vcc_lna_3p3>; + vcc-lna-1p5-supply = <&vcc_lna_1p5>; + vcc-bg-supply = <&vcc_bg>; + vcc-quad-supply = <&vcc_quad>; + vcc-mixer-supply = <&vcc_mixer>; + adi,quad-se-mode = "diff"; + adi,detector-enable; + adi,p1db-compensation-enable; + }; + }; +... -- 2.35.1
