Re: [PATCH v2 1/1] iio: frequency: adf4350: Make use of device properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu,  3 Feb 2022 13:00:06 +0200
Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> wrote:

> Convert the module to be property provider agnostic and allow
> it to be used on non-OF platforms.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>

Whilst it's long each individual change is simple, so applied to the togreg
branch of iio.git and pushed out as testing to see if the autobuilders
can find anything we missed.

Thanks,

Jonathan


> ---
> v2: fixed typo (lkp)
>  drivers/iio/frequency/adf4350.c | 103 +++++++++++++-------------------
>  1 file changed, 42 insertions(+), 61 deletions(-)
> 
> diff --git a/drivers/iio/frequency/adf4350.c b/drivers/iio/frequency/adf4350.c
> index 3d9eba716b69..9af20a51540d 100644
> --- a/drivers/iio/frequency/adf4350.c
> +++ b/drivers/iio/frequency/adf4350.c
> @@ -7,17 +7,18 @@
>  
>  #include <linux/device.h>
>  #include <linux/kernel.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/property.h>
>  #include <linux/slab.h>
>  #include <linux/sysfs.h>
>  #include <linux/spi/spi.h>
>  #include <linux/regulator/consumer.h>
>  #include <linux/err.h>
> -#include <linux/module.h>
>  #include <linux/gcd.h>
>  #include <linux/gpio/consumer.h>
>  #include <asm/div64.h>
>  #include <linux/clk.h>
> -#include <linux/of.h>
>  
>  #include <linux/iio/iio.h>
>  #include <linux/iio/sysfs.h>
> @@ -381,10 +382,8 @@ static const struct iio_info adf4350_info = {
>  	.debugfs_reg_access = &adf4350_reg_access,
>  };
>  
> -#ifdef CONFIG_OF
>  static struct adf4350_platform_data *adf4350_parse_dt(struct device *dev)
>  {
> -	struct device_node *np = dev->of_node;
>  	struct adf4350_platform_data *pdata;
>  	unsigned int tmp;
>  
> @@ -392,101 +391,83 @@ static struct adf4350_platform_data *adf4350_parse_dt(struct device *dev)
>  	if (!pdata)
>  		return NULL;
>  
> -	snprintf(&pdata->name[0], SPI_NAME_SIZE - 1, "%pOFn", np);
> +	snprintf(pdata->name, sizeof(pdata->name), "%pfw", dev_fwnode(dev));
>  
>  	tmp = 10000;
> -	of_property_read_u32(np, "adi,channel-spacing", &tmp);
> +	device_property_read_u32(dev, "adi,channel-spacing", &tmp);
>  	pdata->channel_spacing = tmp;
>  
>  	tmp = 0;
> -	of_property_read_u32(np, "adi,power-up-frequency", &tmp);
> +	device_property_read_u32(dev, "adi,power-up-frequency", &tmp);
>  	pdata->power_up_frequency = tmp;
>  
>  	tmp = 0;
> -	of_property_read_u32(np, "adi,reference-div-factor", &tmp);
> +	device_property_read_u32(dev, "adi,reference-div-factor", &tmp);
>  	pdata->ref_div_factor = tmp;
>  
> -	pdata->ref_doubler_en = of_property_read_bool(np,
> -			"adi,reference-doubler-enable");
> -	pdata->ref_div2_en = of_property_read_bool(np,
> -			"adi,reference-div2-enable");
> +	pdata->ref_doubler_en = device_property_read_bool(dev, "adi,reference-doubler-enable");
> +	pdata->ref_div2_en = device_property_read_bool(dev, "adi,reference-div2-enable");
>  
>  	/* r2_user_settings */
> -	pdata->r2_user_settings = of_property_read_bool(np,
> -			"adi,phase-detector-polarity-positive-enable") ?
> -			ADF4350_REG2_PD_POLARITY_POS : 0;
> -	pdata->r2_user_settings |= of_property_read_bool(np,
> -			"adi,lock-detect-precision-6ns-enable") ?
> -			ADF4350_REG2_LDP_6ns : 0;
> -	pdata->r2_user_settings |= of_property_read_bool(np,
> -			"adi,lock-detect-function-integer-n-enable") ?
> -			ADF4350_REG2_LDF_INT_N : 0;
> +	pdata->r2_user_settings = 0;
> +	if (device_property_read_bool(dev, "adi,phase-detector-polarity-positive-enable"))
> +		pdata->r2_user_settings |= ADF4350_REG2_PD_POLARITY_POS;
> +	if (device_property_read_bool(dev, "adi,lock-detect-precision-6ns-enable"))
> +		pdata->r2_user_settings |= ADF4350_REG2_LDP_6ns;
> +	if (device_property_read_bool(dev, "adi,lock-detect-function-integer-n-enable"))
> +		pdata->r2_user_settings |= ADF4350_REG2_LDF_INT_N;
>  
>  	tmp = 2500;
> -	of_property_read_u32(np, "adi,charge-pump-current", &tmp);
> +	device_property_read_u32(dev, "adi,charge-pump-current", &tmp);
>  	pdata->r2_user_settings |= ADF4350_REG2_CHARGE_PUMP_CURR_uA(tmp);
>  
>  	tmp = 0;
> -	of_property_read_u32(np, "adi,muxout-select", &tmp);
> +	device_property_read_u32(dev, "adi,muxout-select", &tmp);
>  	pdata->r2_user_settings |= ADF4350_REG2_MUXOUT(tmp);
>  
> -	pdata->r2_user_settings |= of_property_read_bool(np,
> -			"adi,low-spur-mode-enable") ?
> -			ADF4350_REG2_NOISE_MODE(0x3) : 0;
> +	if (device_property_read_bool(dev, "adi,low-spur-mode-enable"))
> +		pdata->r2_user_settings |= ADF4350_REG2_NOISE_MODE(0x3);
>  
>  	/* r3_user_settings */
>  
> -	pdata->r3_user_settings = of_property_read_bool(np,
> -			"adi,cycle-slip-reduction-enable") ?
> -			ADF4350_REG3_12BIT_CSR_EN : 0;
> -	pdata->r3_user_settings |= of_property_read_bool(np,
> -			"adi,charge-cancellation-enable") ?
> -			ADF4351_REG3_CHARGE_CANCELLATION_EN : 0;
> -
> -	pdata->r3_user_settings |= of_property_read_bool(np,
> -			"adi,anti-backlash-3ns-enable") ?
> -			ADF4351_REG3_ANTI_BACKLASH_3ns_EN : 0;
> -	pdata->r3_user_settings |= of_property_read_bool(np,
> -			"adi,band-select-clock-mode-high-enable") ?
> -			ADF4351_REG3_BAND_SEL_CLOCK_MODE_HIGH : 0;
> +	pdata->r3_user_settings = 0;
> +	if (device_property_read_bool(dev, "adi,cycle-slip-reduction-enable"))
> +		pdata->r3_user_settings |= ADF4350_REG3_12BIT_CSR_EN;
> +	if (device_property_read_bool(dev, "adi,charge-cancellation-enable"))
> +		pdata->r3_user_settings |= ADF4351_REG3_CHARGE_CANCELLATION_EN;
> +	if (device_property_read_bool(dev, "adi,anti-backlash-3ns-enable"))
> +		pdata->r3_user_settings |= ADF4351_REG3_ANTI_BACKLASH_3ns_EN;
> +	if (device_property_read_bool(dev, "adi,band-select-clock-mode-high-enable"))
> +		pdata->r3_user_settings |= ADF4351_REG3_BAND_SEL_CLOCK_MODE_HIGH;
>  
>  	tmp = 0;
> -	of_property_read_u32(np, "adi,12bit-clk-divider", &tmp);
> +	device_property_read_u32(dev, "adi,12bit-clk-divider", &tmp);
>  	pdata->r3_user_settings |= ADF4350_REG3_12BIT_CLKDIV(tmp);
>  
>  	tmp = 0;
> -	of_property_read_u32(np, "adi,clk-divider-mode", &tmp);
> +	device_property_read_u32(dev, "adi,clk-divider-mode", &tmp);
>  	pdata->r3_user_settings |= ADF4350_REG3_12BIT_CLKDIV_MODE(tmp);
>  
>  	/* r4_user_settings */
>  
> -	pdata->r4_user_settings = of_property_read_bool(np,
> -			"adi,aux-output-enable") ?
> -			ADF4350_REG4_AUX_OUTPUT_EN : 0;
> -	pdata->r4_user_settings |= of_property_read_bool(np,
> -			"adi,aux-output-fundamental-enable") ?
> -			ADF4350_REG4_AUX_OUTPUT_FUND : 0;
> -	pdata->r4_user_settings |= of_property_read_bool(np,
> -			"adi,mute-till-lock-enable") ?
> -			ADF4350_REG4_MUTE_TILL_LOCK_EN : 0;
> +	pdata->r4_user_settings = 0;
> +	if (device_property_read_bool(dev, "adi,aux-output-enable"))
> +		pdata->r4_user_settings |= ADF4350_REG4_AUX_OUTPUT_EN;
> +	if (device_property_read_bool(dev, "adi,aux-output-fundamental-enable"))
> +		pdata->r4_user_settings |= ADF4350_REG4_AUX_OUTPUT_FUND;
> +	if (device_property_read_bool(dev, "adi,mute-till-lock-enable"))
> +		pdata->r4_user_settings |= ADF4350_REG4_MUTE_TILL_LOCK_EN;
>  
>  	tmp = 0;
> -	of_property_read_u32(np, "adi,output-power", &tmp);
> +	device_property_read_u32(dev, "adi,output-power", &tmp);
>  	pdata->r4_user_settings |= ADF4350_REG4_OUTPUT_PWR(tmp);
>  
>  	tmp = 0;
> -	of_property_read_u32(np, "adi,aux-output-power", &tmp);
> +	device_property_read_u32(dev, "adi,aux-output-power", &tmp);
>  	pdata->r4_user_settings |= ADF4350_REG4_AUX_OUTPUT_PWR(tmp);
>  
>  	return pdata;
>  }
> -#else
> -static
> -struct adf4350_platform_data *adf4350_parse_dt(struct device *dev)
> -{
> -	return NULL;
> -}
> -#endif
>  



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux