On Thu, 16 Dec 2021 19:52:04 +0100 Lars-Peter Clausen <lars@xxxxxxxxxx> wrote: > I started the sysfs_emit() conversion during the last end-of-year break > starting with the IIO core. It is end-of-year break again, so here is a bit > more. > > This series contains conversions for simple users which all follow the > pattern of `return sprintf(....)` or similar. The series also only covers > cases where the attributes are completely custom and can not be converted > to use iio_read_raw or iio_read_available. These other cases will be > handled seperately by converting them to use the IIO APIs rather than > device attributes. But this requires a bit more validation work than the > simple straigh forward conversions. > Applied with tweaks as mentioned in replies to individual patches. Thanks, Jonathan > Lars-Peter Clausen (13): > iio: core: Use sysfs_emit() > iio: dmaengine-buffer: Use sysfs_emit() > iio: ad7192: Use sysfs_emit() > iio: ad9523: Use sysfs_emit() > iio: as3935: Use sysfs_emit() > iio: ina2xx-adc: sysfs_emit() > iio: lm3533: Use sysfs_emit() > iio: max31856: Use sysfs_emit() > iio: max31865: Use sysfs_emit() > iio: max9611: Use sysfs_emit() > iio: ms_sensors: Use sysfs_emit() > iio: scd4x: Use sysfs_emit() > iio: sps30: Use sysfs_emit() > > drivers/iio/adc/ad7192.c | 4 ++-- > drivers/iio/adc/ina2xx-adc.c | 2 +- > drivers/iio/adc/max9611.c | 2 +- > drivers/iio/buffer/industrialio-buffer-dmaengine.c | 2 +- > drivers/iio/chemical/scd4x.c | 2 +- > drivers/iio/chemical/sps30.c | 2 +- > drivers/iio/common/ms_sensors/ms_sensors_i2c.c | 4 ++-- > drivers/iio/frequency/ad9523.c | 2 +- > drivers/iio/industrialio-buffer.c | 4 ++-- > drivers/iio/industrialio-core.c | 2 +- > drivers/iio/light/lm3533-als.c | 6 +++--- > drivers/iio/proximity/as3935.c | 4 ++-- > drivers/iio/temperature/max31856.c | 4 ++-- > drivers/iio/temperature/max31865.c | 4 ++-- > 14 files changed, 22 insertions(+), 22 deletions(-) >
