Re: [PATCH 09/10] iio: core: Simplify the registration of kfifo buffers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 16 Dec 2021 09:52:38 +0200
Alexandru Ardelean <ardeleanalex@xxxxxxxxx> wrote:

> On Wed, Dec 15, 2021 at 10:04 PM Miquel Raynal
> <miquel.raynal@xxxxxxxxxxx> wrote:
> >
> > Among all the users of the kfifo buffers, no one uses the
> > INDIO_BUFFER_HARDWARE mode. So let's take this as a general rule and
> > simplify a little bit the internals - overall the documentation - by
> > eliminating unused specific cases. Use the INDIO_BUFFER_SOFTWARE mode by
> > default with kfifo buffers, which will basically mimic what all the "non
> > direct" modes do.
> >  
> 
> I think this patch here (and 10/10) can be part of a separate series.
> This discussion is important enough to have it's own series.
> It's a bit of an API discussion.
>
One question inline.
 
> > Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
> > ---
> >  drivers/iio/accel/fxls8962af-core.c                  |  1 -
> >  drivers/iio/accel/sca3000.c                          |  1 -
> >  drivers/iio/accel/ssp_accel_sensor.c                 |  1 -
> >  drivers/iio/adc/ina2xx-adc.c                         |  1 -
> >  drivers/iio/adc/ti_am335x_adc.c                      |  4 +---
> >  drivers/iio/buffer/kfifo_buf.c                       | 12 ++----------
> >  .../common/cros_ec_sensors/cros_ec_sensors_core.c    |  3 +--
> >  drivers/iio/common/scmi_sensors/scmi_iio.c           |  1 -
> >  drivers/iio/gyro/ssp_gyro_sensor.c                   |  1 -
> >  drivers/iio/health/max30100.c                        |  1 -
> >  drivers/iio/health/max30102.c                        |  1 -
> >  drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c    |  1 -
> >  drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c     |  1 -
> >  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c       |  1 -
> >  drivers/iio/light/apds9960.c                         |  1 -
> >  drivers/staging/iio/impedance-analyzer/ad5933.c      |  1 -
> >  include/linux/iio/kfifo_buf.h                        |  5 ++---
> >  17 files changed, 6 insertions(+), 31 deletions(-)
> >
> > diff --git a/drivers/iio/accel/fxls8962af-core.c b/drivers/iio/accel/fxls8962af-core.c
> > index 32989d91b982..cf494937a346 100644
> > --- a/drivers/iio/accel/fxls8962af-core.c
> > +++ b/drivers/iio/accel/fxls8962af-core.c
> > @@ -1209,7 +1209,6 @@ int fxls8962af_core_probe(struct device *dev, struct regmap *regmap, int irq)
> >                         return ret;
> >
> >                 ret = devm_iio_kfifo_buffer_setup(dev, indio_dev,
> > -                                                 INDIO_BUFFER_SOFTWARE,
> >                                                   &fxls8962af_buffer_ops);
> >                 if (ret)
> >                         return ret;
> > diff --git a/drivers/iio/accel/sca3000.c b/drivers/iio/accel/sca3000.c
> > index c6b75308148a..a65a05f1208b 100644
> > --- a/drivers/iio/accel/sca3000.c
> > +++ b/drivers/iio/accel/sca3000.c
> > @@ -1465,7 +1465,6 @@ static int sca3000_probe(struct spi_device *spi)
> >         indio_dev->modes = INDIO_DIRECT_MODE;
> >
> >         ret = devm_iio_kfifo_buffer_setup(&spi->dev, indio_dev,
> > -                                         INDIO_BUFFER_SOFTWARE,
> >                                           &sca3000_ring_setup_ops);
> >         if (ret)
> >                 return ret;
> > diff --git a/drivers/iio/accel/ssp_accel_sensor.c b/drivers/iio/accel/ssp_accel_sensor.c
> > index 04dcb2b657ee..d20f8d299c11 100644
> > --- a/drivers/iio/accel/ssp_accel_sensor.c
> > +++ b/drivers/iio/accel/ssp_accel_sensor.c
> > @@ -113,7 +113,6 @@ static int ssp_accel_probe(struct platform_device *pdev)
> >         indio_dev->available_scan_masks = ssp_accel_scan_mask;
> >
> >         ret = devm_iio_kfifo_buffer_setup(&pdev->dev, indio_dev,
> > -                                         INDIO_BUFFER_SOFTWARE,
> >                                           &ssp_accel_buffer_ops);
> >         if (ret)
> >                 return ret;
> > diff --git a/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c
> > index a4b2ff9e0dd5..013d2d586df1 100644
> > --- a/drivers/iio/adc/ina2xx-adc.c
> > +++ b/drivers/iio/adc/ina2xx-adc.c
> > @@ -1030,7 +1030,6 @@ static int ina2xx_probe(struct i2c_client *client,
> >         indio_dev->name = id->name;
> >
> >         ret = devm_iio_kfifo_buffer_setup(&client->dev, indio_dev,
> > -                                         INDIO_BUFFER_SOFTWARE,
> >                                           &ina2xx_setup_ops);
> >         if (ret)
> >                 return ret;
> > diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
> > index dbdc1ef48566..567d43a30955 100644
> > --- a/drivers/iio/adc/ti_am335x_adc.c
> > +++ b/drivers/iio/adc/ti_am335x_adc.c
> > @@ -376,9 +376,7 @@ static int tiadc_iio_buffered_hardware_setup(struct device *dev,
> >  {
> >         int ret;
> >
> > -       ret = devm_iio_kfifo_buffer_setup(dev, indio_dev,
> > -                                         INDIO_BUFFER_SOFTWARE,
> > -                                         setup_ops);
> > +       ret = devm_iio_kfifo_buffer_setup(dev, indio_dev, setup_ops);
> >         if (ret)
> >                 return ret;
> >
> > diff --git a/drivers/iio/buffer/kfifo_buf.c b/drivers/iio/buffer/kfifo_buf.c
> > index 416d35a61ae2..f17473e06ee8 100644
> > --- a/drivers/iio/buffer/kfifo_buf.c
> > +++ b/drivers/iio/buffer/kfifo_buf.c
> > @@ -197,7 +197,7 @@ static const struct iio_buffer_access_funcs kfifo_access_funcs = {
> >         .set_length = &iio_set_length_kfifo,
> >         .release = &iio_kfifo_buffer_release,
> >
> > -       .modes = INDIO_BUFFER_SOFTWARE | INDIO_BUFFER_TRIGGERED,
> > +       .modes = INDIO_BUFFER_SOFTWARE,

Why is this safe to do?  Don't we need triggered buffers to match mode
when used with a kfifo?

If I'm remembering / reading how the mode matching works, this breaks the
industrialio-triggered-buffer.c case where it sets the mode to
INDIO_BUFFER_TRIGGERED (mostly I think to make sure we get a warning in
iio_verify_update() if no trigger is supplied - I can't remember what other
difference it makes (or if it does).



> >  };
> >
> >  struct iio_buffer *iio_kfifo_allocate(void)
> > @@ -259,8 +259,6 @@ static struct iio_buffer *devm_iio_kfifo_allocate(struct device *dev)
> >   * devm_iio_kfifo_buffer_setup_ext - Allocate a kfifo buffer & attach it to an IIO device
> >   * @dev: Device object to which to attach the life-time of this kfifo buffer
> >   * @indio_dev: The device the buffer should be attached to
> > - * @mode_flags: The mode flags for this buffer (INDIO_BUFFER_SOFTWARE and/or
> > - *             INDIO_BUFFER_TRIGGERED).
> >   * @setup_ops: The setup_ops required to configure the HW part of the buffer (optional)
> >   * @buffer_attrs: Extra sysfs buffer attributes for this IIO buffer
> >   *
> > @@ -271,22 +269,16 @@ static struct iio_buffer *devm_iio_kfifo_allocate(struct device *dev)
> >   */
> >  int devm_iio_kfifo_buffer_setup_ext(struct device *dev,
> >                                     struct iio_dev *indio_dev,
> > -                                   int mode_flags,
> >                                     const struct iio_buffer_setup_ops *setup_ops,
> >                                     const struct attribute **buffer_attrs)
> >  {
> >         struct iio_buffer *buffer;
> >
> > -       if (!mode_flags)
> > -               return -EINVAL;
> > -
> >         buffer = devm_iio_kfifo_allocate(dev);
> >         if (!buffer)
> >                 return -ENOMEM;
> >
> > -       mode_flags &= kfifo_access_funcs.modes;
> > -
> > -       indio_dev->modes |= mode_flags;
> > +       indio_dev->modes |= INDIO_BUFFER_SOFTWARE;
> >         indio_dev->setup_ops = setup_ops;
> >
> >         buffer->attrs = buffer_attrs;
> > diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> > index b2725c6adc7f..a4cf1d9a8a49 100644
> > --- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> > +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> > @@ -333,8 +333,7 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
> >                          * We can not use trigger here, as events are generated
> >                          * as soon as sample_frequency is set.
> >                          */
> > -                       ret = devm_iio_kfifo_buffer_setup_ext(dev, indio_dev,
> > -                                                             INDIO_BUFFER_SOFTWARE, NULL,
> > +                       ret = devm_iio_kfifo_buffer_setup_ext(dev, indio_dev, NULL,
> >                                                               cros_ec_sensor_fifo_attributes);
> >                         if (ret)
> >                                 return ret;
> > diff --git a/drivers/iio/common/scmi_sensors/scmi_iio.c b/drivers/iio/common/scmi_sensors/scmi_iio.c
> > index 7cf2bf282cef..792807b2894f 100644
> > --- a/drivers/iio/common/scmi_sensors/scmi_iio.c
> > +++ b/drivers/iio/common/scmi_sensors/scmi_iio.c
> > @@ -631,7 +631,6 @@ static int scmi_iio_dev_probe(struct scmi_device *sdev)
> >
> >                 err = devm_iio_kfifo_buffer_setup(&scmi_iio_dev->dev,
> >                                                   scmi_iio_dev,
> > -                                                 INDIO_BUFFER_SOFTWARE,
> >                                                   &scmi_iio_buffer_ops);
> >                 if (err < 0) {
> >                         dev_err(dev,
> > diff --git a/drivers/iio/gyro/ssp_gyro_sensor.c b/drivers/iio/gyro/ssp_gyro_sensor.c
> > index 46ed12771d2f..eebc036717af 100644
> > --- a/drivers/iio/gyro/ssp_gyro_sensor.c
> > +++ b/drivers/iio/gyro/ssp_gyro_sensor.c
> > @@ -113,7 +113,6 @@ static int ssp_gyro_probe(struct platform_device *pdev)
> >         indio_dev->available_scan_masks = ssp_gyro_scan_mask;
> >
> >         ret = devm_iio_kfifo_buffer_setup(&pdev->dev, indio_dev,
> > -                                         INDIO_BUFFER_SOFTWARE,
> >                                           &ssp_gyro_buffer_ops);
> >         if (ret)
> >                 return ret;
> > diff --git a/drivers/iio/health/max30100.c b/drivers/iio/health/max30100.c
> > index 36ba7611d9ce..ad5717965223 100644
> > --- a/drivers/iio/health/max30100.c
> > +++ b/drivers/iio/health/max30100.c
> > @@ -433,7 +433,6 @@ static int max30100_probe(struct i2c_client *client,
> >         indio_dev->modes = INDIO_DIRECT_MODE;
> >
> >         ret = devm_iio_kfifo_buffer_setup(&client->dev, indio_dev,
> > -                                         INDIO_BUFFER_SOFTWARE,
> >                                           &max30100_buffer_setup_ops);
> >         if (ret)
> >                 return ret;
> > diff --git a/drivers/iio/health/max30102.c b/drivers/iio/health/max30102.c
> > index 2292876c55e2..abbcef563807 100644
> > --- a/drivers/iio/health/max30102.c
> > +++ b/drivers/iio/health/max30102.c
> > @@ -542,7 +542,6 @@ static int max30102_probe(struct i2c_client *client,
> >         }
> >
> >         ret = devm_iio_kfifo_buffer_setup(&client->dev, indio_dev,
> > -                                         INDIO_BUFFER_SOFTWARE,
> >                                           &max30102_buffer_setup_ops);
> >         if (ret)
> >                 return ret;
> > diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c
> > index 383cc3250342..c3f433ad3af6 100644
> > --- a/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c
> > +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c
> > @@ -731,7 +731,6 @@ struct iio_dev *inv_icm42600_accel_init(struct inv_icm42600_state *st)
> >         indio_dev->available_scan_masks = inv_icm42600_accel_scan_masks;
> >
> >         ret = devm_iio_kfifo_buffer_setup(dev, indio_dev,
> > -                                         INDIO_BUFFER_SOFTWARE,
> >                                           &inv_icm42600_buffer_ops);
> >         if (ret)
> >                 return ERR_PTR(ret);
> > diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c
> > index cec1dd0e0464..9d94a8518e3c 100644
> > --- a/drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c
> > +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c
> > @@ -743,7 +743,6 @@ struct iio_dev *inv_icm42600_gyro_init(struct inv_icm42600_state *st)
> >         indio_dev->setup_ops = &inv_icm42600_buffer_ops;
> >
> >         ret = devm_iio_kfifo_buffer_setup(dev, indio_dev,
> > -                                         INDIO_BUFFER_SOFTWARE,
> >                                           &inv_icm42600_buffer_ops);
> >         if (ret)
> >                 return ERR_PTR(ret);
> > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
> > index 16730a780964..f80c62849d30 100644
> > --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
> > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
> > @@ -746,7 +746,6 @@ int st_lsm6dsx_fifo_setup(struct st_lsm6dsx_hw *hw)
> >                         continue;
> >
> >                 ret = devm_iio_kfifo_buffer_setup(hw->dev, hw->iio_devs[i],
> > -                                                 INDIO_BUFFER_SOFTWARE,
> >                                                   &st_lsm6dsx_buffer_ops);
> >                 if (ret)
> >                         return ret;
> > diff --git a/drivers/iio/light/apds9960.c b/drivers/iio/light/apds9960.c
> > index 4141c0fa7bc4..09b831f9f40b 100644
> > --- a/drivers/iio/light/apds9960.c
> > +++ b/drivers/iio/light/apds9960.c
> > @@ -1003,7 +1003,6 @@ static int apds9960_probe(struct i2c_client *client,
> >         indio_dev->modes = INDIO_DIRECT_MODE;
> >
> >         ret = devm_iio_kfifo_buffer_setup(&client->dev, indio_dev,
> > -                                         INDIO_BUFFER_SOFTWARE,
> >                                           &apds9960_buffer_setup_ops);
> >         if (ret)
> >                 return ret;
> > diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c
> > index 793918e1c45f..f177b20f0f2d 100644
> > --- a/drivers/staging/iio/impedance-analyzer/ad5933.c
> > +++ b/drivers/staging/iio/impedance-analyzer/ad5933.c
> > @@ -749,7 +749,6 @@ static int ad5933_probe(struct i2c_client *client,
> >         indio_dev->num_channels = ARRAY_SIZE(ad5933_channels);
> >
> >         ret = devm_iio_kfifo_buffer_setup(&client->dev, indio_dev,
> > -                                         INDIO_BUFFER_SOFTWARE,
> >                                           &ad5933_ring_setup_ops);
> >         if (ret)
> >                 return ret;
> > diff --git a/include/linux/iio/kfifo_buf.h b/include/linux/iio/kfifo_buf.h
> > index ccd2ceae7b25..8a83fb58232d 100644
> > --- a/include/linux/iio/kfifo_buf.h
> > +++ b/include/linux/iio/kfifo_buf.h
> > @@ -12,11 +12,10 @@ void iio_kfifo_free(struct iio_buffer *r);
> >
> >  int devm_iio_kfifo_buffer_setup_ext(struct device *dev,
> >                                     struct iio_dev *indio_dev,
> > -                                   int mode_flags,
> >                                     const struct iio_buffer_setup_ops *setup_ops,
> >                                     const struct attribute **buffer_attrs);
> >
> > -#define devm_iio_kfifo_buffer_setup(dev, indio_dev, mode_flags, setup_ops)     \
> > -       devm_iio_kfifo_buffer_setup_ext((dev), (indio_dev), (mode_flags), (setup_ops), NULL)
> > +#define devm_iio_kfifo_buffer_setup(dev, indio_dev, setup_ops) \
> > +       devm_iio_kfifo_buffer_setup_ext((dev), (indio_dev), (setup_ops), NULL)
> >
> >  #endif
> > --
> > 2.27.0
> >  




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux