Re: [PATCH 3/7] iio: adc: sc27xx: structure adjuststment and optimization

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Baolin Wang <baolin.wang7@xxxxxxxxx> 于2022年1月7日周五 15:03写道:
>
> On Thu, Jan 6, 2022 at 9:00 PM Cixi Geng <gengcixi@xxxxxxxxx> wrote:
> >
> > From: Cixi Geng <cixi.geng1@xxxxxxxxxx>
> >
> > Introduce one variant device data structure to be compatible
> > with SC2731 PMIC since it has different scale and ratio calculation
> > and so on.
> >
> > Signed-off-by: Yuming Zhu <yuming.zhu1@xxxxxxxxxx>
> > Signed-off-by: Cixi Geng <cixi.geng1@xxxxxxxxxx>
> > ---
> >  drivers/iio/adc/sc27xx_adc.c | 94 ++++++++++++++++++++++++++++++------
> >  1 file changed, 79 insertions(+), 15 deletions(-)
> >
> > diff --git a/drivers/iio/adc/sc27xx_adc.c b/drivers/iio/adc/sc27xx_adc.c
> > index aee076c8e2b1..d2712e54ee79 100644
> > --- a/drivers/iio/adc/sc27xx_adc.c
> > +++ b/drivers/iio/adc/sc27xx_adc.c
> > @@ -12,9 +12,9 @@
> >  #include <linux/slab.h>
> >
> >  /* PMIC global registers definition */
> > -#define SC27XX_MODULE_EN               0xc08
> > +#define SC2731_MODULE_EN               0xc08
> >  #define SC27XX_MODULE_ADC_EN           BIT(5)
> > -#define SC27XX_ARM_CLK_EN              0xc10
> > +#define SC2731_ARM_CLK_EN              0xc10
> >  #define SC27XX_CLK_ADC_EN              BIT(5)
> >  #define SC27XX_CLK_ADC_CLK_EN          BIT(6)
> >
> > @@ -78,6 +78,23 @@ struct sc27xx_adc_data {
> >         int channel_scale[SC27XX_ADC_CHANNEL_MAX];
> >         u32 base;
> >         int irq;
> > +       const struct sc27xx_adc_variant_data *var_data;
> > +};
> > +
> > +/*
> > + * Since different PMICs of SC27xx series can have different
> > + * address and ratio, we should save ratio config and base
> > + * in the device data structure.
> > + */
> > +struct sc27xx_adc_variant_data {
> > +       u32 module_en;
> > +       u32 clk_en;
> > +       u32 scale_shift;
> > +       u32 scale_mask;
> > +       const struct sc27xx_adc_linear_graph *bscale_cal;
> > +       const struct sc27xx_adc_linear_graph *sscale_cal;
> > +       void (*init_scale)(struct sc27xx_adc_data *data);
> > +       int (*get_ratio)(int channel, int scale);
> >  };
> >
> >  struct sc27xx_adc_linear_graph {
> > @@ -103,6 +120,16 @@ static struct sc27xx_adc_linear_graph small_scale_graph = {
> >         100, 341,
> >  };
> >
> > +static const struct sc27xx_adc_linear_graph sc2731_big_scale_graph_calib = {
> > +       4200, 850,
> > +       3600, 728,
> > +};
> > +
> > +static const struct sc27xx_adc_linear_graph sc2731_small_scale_graph_calib = {
> > +       1000, 838,
> > +       100, 84,
> > +};
>
> The original big_scale_graph_calib and small_scale_graph_calib are for
> SC2731 PMIC, why add new structure definition for SC2731?
>
> > +
> >  static const struct sc27xx_adc_linear_graph big_scale_graph_calib = {
> >         4200, 856,
> >         3600, 733,
> > @@ -130,11 +157,11 @@ static int sc27xx_adc_scale_calibration(struct sc27xx_adc_data *data,
> >         size_t len;
> >
> >         if (big_scale) {
> > -               calib_graph = &big_scale_graph_calib;
> > +               calib_graph = data->var_data->bscale_cal;
> >                 graph = &big_scale_graph;
> >                 cell_name = "big_scale_calib";
> >         } else {
> > -               calib_graph = &small_scale_graph_calib;
> > +               calib_graph = data->var_data->sscale_cal;
> >                 graph = &small_scale_graph;
> >                 cell_name = "small_scale_calib";
> >         }
> > @@ -160,7 +187,7 @@ static int sc27xx_adc_scale_calibration(struct sc27xx_adc_data *data,
> >         return 0;
> >  }
> >
> > -static int sc27xx_adc_get_ratio(int channel, int scale)
> > +static int sc2731_adc_get_ratio(int channel, int scale)
> >  {
> >         switch (channel) {
> >         case 1:
> > @@ -185,6 +212,21 @@ static int sc27xx_adc_get_ratio(int channel, int scale)
> >         return SC27XX_VOLT_RATIO(1, 1);
> >  }
> >
> > +/*
> > + * According to the datasheet set specific value on some channel.
> > + */
> > +static void sc2731_adc_scale_init(struct sc27xx_adc_data *data)
> > +{
> > +       int i;
> > +
> > +       for (i = 0; i < SC27XX_ADC_CHANNEL_MAX; i++) {
> > +               if (i == 5)
> > +                       data->channel_scale[i] = 1;
> > +               else
> > +                       data->channel_scale[i] = 0;
> > +       }
> > +}
>
> This is unnecessary I think, please see sc27xx_adc_write_raw() that
> can set the channel scale.
Did you mean that all the PMIC's scale_init function should put into
the sc27xx_adc_write_raw?
but the scale_init is all different by each PMIC, if implemented in
the write_raw, will add a lot of
if or switch_case branch
>
> > +
> >  static int sc27xx_adc_read(struct sc27xx_adc_data *data, int channel,
> >                            int scale, int *val)
> >  {
> > @@ -208,10 +250,11 @@ static int sc27xx_adc_read(struct sc27xx_adc_data *data, int channel,
> >                 goto disable_adc;
> >
> >         /* Configure the channel id and scale */
> > -       tmp = (scale << SC27XX_ADC_SCALE_SHIFT) & SC27XX_ADC_SCALE_MASK;
> > +       tmp = (scale << data->var_data->scale_shift) & data->var_data->scale_mask;
> >         tmp |= channel & SC27XX_ADC_CHN_ID_MASK;
> >         ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CH_CFG,
> > -                                SC27XX_ADC_CHN_ID_MASK | SC27XX_ADC_SCALE_MASK,
> > +                                SC27XX_ADC_CHN_ID_MASK |
> > +                                data->var_data->scale_mask,
> >                                  tmp);
> >         if (ret)
> >                 goto disable_adc;
> > @@ -262,8 +305,9 @@ static void sc27xx_adc_volt_ratio(struct sc27xx_adc_data *data,
> >                                   int channel, int scale,
> >                                   u32 *div_numerator, u32 *div_denominator)
> >  {
> > -       u32 ratio = sc27xx_adc_get_ratio(channel, scale);
> > +       u32 ratio;
> >
> > +       ratio = data->var_data->get_ratio(channel, scale);
> >         *div_numerator = ratio >> SC27XX_RATIO_NUMERATOR_OFFSET;
> >         *div_denominator = ratio & SC27XX_RATIO_DENOMINATOR_MASK;
> >  }
> > @@ -432,13 +476,13 @@ static int sc27xx_adc_enable(struct sc27xx_adc_data *data)
> >  {
> >         int ret;
> >
> > -       ret = regmap_update_bits(data->regmap, SC27XX_MODULE_EN,
> > +       ret = regmap_update_bits(data->regmap, data->var_data->module_en,
> >                                  SC27XX_MODULE_ADC_EN, SC27XX_MODULE_ADC_EN);
> >         if (ret)
> >                 return ret;
> >
> >         /* Enable ADC work clock and controller clock */
> > -       ret = regmap_update_bits(data->regmap, SC27XX_ARM_CLK_EN,
> > +       ret = regmap_update_bits(data->regmap, data->var_data->clk_en,
> >                                  SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN,
> >                                  SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN);
> >         if (ret)
> > @@ -456,10 +500,10 @@ static int sc27xx_adc_enable(struct sc27xx_adc_data *data)
> >         return 0;
> >
> >  disable_clk:
> > -       regmap_update_bits(data->regmap, SC27XX_ARM_CLK_EN,
> > +       regmap_update_bits(data->regmap, data->var_data->clk_en,
> >                            SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN, 0);
> >  disable_adc:
> > -       regmap_update_bits(data->regmap, SC27XX_MODULE_EN,
> > +       regmap_update_bits(data->regmap, data->var_data->module_en,
> >                            SC27XX_MODULE_ADC_EN, 0);
> >
> >         return ret;
> > @@ -470,21 +514,39 @@ static void sc27xx_adc_disable(void *_data)
> >         struct sc27xx_adc_data *data = _data;
> >
> >         /* Disable ADC work clock and controller clock */
> > -       regmap_update_bits(data->regmap, SC27XX_ARM_CLK_EN,
> > +       regmap_update_bits(data->regmap, data->var_data->clk_en,
> >                            SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN, 0);
> >
> > -       regmap_update_bits(data->regmap, SC27XX_MODULE_EN,
> > +       regmap_update_bits(data->regmap, data->var_data->module_en,
> >                            SC27XX_MODULE_ADC_EN, 0);
> >  }
> >
> > +static const struct sc27xx_adc_variant_data sc2731_data = {
> > +       .module_en = SC2731_MODULE_EN,
> > +       .clk_en = SC2731_ARM_CLK_EN,
> > +       .scale_shift = SC27XX_ADC_SCALE_SHIFT,
> > +       .scale_mask = SC27XX_ADC_SCALE_MASK,
> > +       .bscale_cal = &sc2731_big_scale_graph_calib,
> > +       .sscale_cal = &sc2731_small_scale_graph_calib,
> > +       .init_scale = sc2731_adc_scale_init,
> > +       .get_ratio = sc2731_adc_get_ratio,
> > +};
> > +
> >  static int sc27xx_adc_probe(struct platform_device *pdev)
> >  {
> >         struct device *dev = &pdev->dev;
> >         struct device_node *np = dev->of_node;
> >         struct sc27xx_adc_data *sc27xx_data;
> > +       const struct sc27xx_adc_variant_data *pdata;
> >         struct iio_dev *indio_dev;
> >         int ret;
> >
> > +       pdata = of_device_get_match_data(dev);
> > +       if (!pdata) {
> > +               dev_err(dev, "No matching driver data found\n");
> > +               return -EINVAL;
> > +       }
> > +
> >         indio_dev = devm_iio_device_alloc(dev, sizeof(*sc27xx_data));
> >         if (!indio_dev)
> >                 return -ENOMEM;
> > @@ -520,6 +582,8 @@ static int sc27xx_adc_probe(struct platform_device *pdev)
> >         }
> >
> >         sc27xx_data->dev = dev;
> > +       sc27xx_data->var_data = pdata;
> > +       sc27xx_data->var_data->init_scale(sc27xx_data);
> >
> >         ret = sc27xx_adc_enable(sc27xx_data);
> >         if (ret) {
> > @@ -546,7 +610,7 @@ static int sc27xx_adc_probe(struct platform_device *pdev)
> >  }
> >
> >  static const struct of_device_id sc27xx_adc_of_match[] = {
> > -       { .compatible = "sprd,sc2731-adc", },
> > +       { .compatible = "sprd,sc2731-adc", .data = &sc2731_data},
> >         { }
> >  };
> >  MODULE_DEVICE_TABLE(of, sc27xx_adc_of_match);
> > --
> > 2.25.1
> >
>
>
> --
> Baolin Wang




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux