On Mon, 3 Jan 2022 11:22:01 +0200 Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx> wrote: > Add documentation for the use of the Digital Attenuator gain. > > Signed-off-by: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx> > --- > .../testing/sysfs-bus-iio-frequency-admv1014 | 23 +++++++++++++++++++ > 1 file changed, 23 insertions(+) > create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-frequency-admv1014 > > diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-admv1014 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-admv1014 > new file mode 100644 > index 000000000000..385bf5b4b399 > --- /dev/null > +++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-admv1014 > @@ -0,0 +1,23 @@ > +What: /sys/bus/iio/devices/iio:deviceX/in_altvoltage0_i_gain_coarse > +KernelVersion: > +Contact: linux-iio@xxxxxxxxxxxxxxx > +Description: > + Read/write value for the digital attenuator gain (IF_I) with coarse steps. > + > +What: /sys/bus/iio/devices/iio:deviceX/in_altvoltage0_q_gain_coarse > +KernelVersion: > +Contact: linux-iio@xxxxxxxxxxxxxxx > +Description: > + Read/write value for the digital attenuator gain (IF_Q) with coarse steps. > + > +What: /sys/bus/iio/devices/iio:deviceX/in_altvoltage0_i_gain_fine > +KernelVersion: > +Contact: linux-iio@xxxxxxxxxxxxxxx > +Description: > + Read/write value for the digital attenuator gain (IF_I) with fine steps. > + > +What: /sys/bus/iio/devices/iio:deviceX/in_altvoltage0_q_gain_fine > +KernelVersion: > +Contact: linux-iio@xxxxxxxxxxxxxxx > +Description: > + Read/write value for the digital attenuator gain (IF_Q) with fine steps. I guess it's horribly optimistic to wonder if these can be expressed as a single gain? I'm going to guess no as they are basically 'twiddle' functions with frequency dependent gain characteristics. My gut feeling is these are meant for for calibration tweaking so is calibbscale as currently defined applicable? " Hardware applied calibration scale factor (assumed to fix production inaccuracies). If shared across all channels, <type>_calibscale is used. " you'd still need the fine and coarse postfix unfortunately. A nice thing about calibscale is it's defined unit free as it's normally a tweak on an input amplifier or similar. Jonathan
