Add binding to configure Semtech sx9360 sensor. It is a simpler version of sx9324. Signed-off-by: Gwendal Grignou <gwendal@xxxxxxxxxxxx> Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx> --- No Changes since v5. No Changes since v4. No Changes since v3. Changes since v2: - Use const instead of single enum. - Use proper syntax for maximum/minimum - Fix spelling errors. Changes since v1: - Fix cut and paste error. - Add . at end of sentence. .../iio/proximity/semtech,sx9360.yaml | 89 +++++++++++++++++++ 1 file changed, 89 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml new file mode 100644 index 00000000000000..63e1a1fd00d4ca --- /dev/null +++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/proximity/semtech,sx9360.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Semtech's SX9360 capacitive proximity sensor + +maintainers: + - Gwendal Grignou <gwendal@xxxxxxxxxxxx> + - Daniel Campello <campello@xxxxxxxxxxxx> + +description: | + Semtech's SX9360 proximity sensor. + +properties: + compatible: + const: semtech,sx9360 + + reg: + maxItems: 1 + + interrupts: + description: + Generated by device to announce preceding read request has finished + and data is available or that a close/far proximity event has happened. + maxItems: 1 + + vdd-supply: + description: Main power supply + + svdd-supply: + description: Host interface power supply + + "#io-channel-cells": + const: 1 + + semtech,resolution: + $ref: /schemas/types.yaml#/definitions/uint32-array + enum: [8, 16, 32, 64, 128, 256, 512, 1024] + description: + Capacitance measurement resolution. For both phases, "reference" and + "measurement". Higher the number, higher the resolution. + default: 128 + + semtech,proxraw-strength: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + default: 1 + description: + PROXRAW filter strength for both phases. A value of 0 represents off, + and other values represent 1-1/2^N. + + semtech,avg-pos-strength: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295] + default: 16 + description: | + Average positive filter strength. A value of 0 represents off and + UINT_MAX (4294967295) represents infinite. Other values + represent 1-1/N. + +required: + - compatible + - reg + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + proximity@28 { + compatible = "semtech,sx9360"; + reg = <0x28>; + interrupt-parent = <&pio>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW 5>; + vdd-supply = <&pp3300_a>; + svdd-supply = <&pp1800_prox>; + #io-channel-cells = <1>; + semtech,resolution = <256>; + semtech,proxraw-strength = <2>; + semtech,avg-pos-strength = <64>; + }; + }; -- 2.34.1.448.ga2b2bfdf31-goog
