Add a new Semtech SAR sensor SX9324. Instead of recopying 1/3 of the sx9310 driver, move common code in a new file. It will be used again for the next sensor, SX9360. Major changes in v2: Better interface between common code and drivers Document SX9324 phase configuration Gwendal Grignou (5): iio: sx9310: Add frequency in read_avail iio: sx9310: Extract common Semtech sensor logic iio: proximity: Add SX9324 support dt-bindings: iio: Add sx9324 binding iio: sx9324: Add dt_bidding support .../ABI/testing/sysfs-bus-iio-sx9324 | 29 + .../iio/proximity/semtech,sx9324.yaml | 140 +++ drivers/iio/proximity/Kconfig | 18 + drivers/iio/proximity/Makefile | 3 +- drivers/iio/proximity/sx9310.c | 705 ++--------- drivers/iio/proximity/sx9324.c | 1088 +++++++++++++++++ drivers/iio/proximity/sx_common.c | 575 +++++++++ drivers/iio/proximity/sx_common.h | 158 +++ 8 files changed, 2112 insertions(+), 604 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-sx9324 create mode 100644 Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml create mode 100644 drivers/iio/proximity/sx9324.c create mode 100644 drivers/iio/proximity/sx_common.c create mode 100644 drivers/iio/proximity/sx_common.h -- 2.33.1.1089.g2158813163f-goog
