On Mon, 25 Oct 2021 09:19:50 -0300 André Gustavo Nakagomi Lopez <andregnl@xxxxxx> wrote: > clk_get_rate is not guaranteed to work if called before clk_prepare_enable. > > Reorder clk_get_rate, so it's called after clk_prepare_enable and > after devm_add_action_or_reset of lpc18xx_clk_disable. > > Suggested-by: Jonathan Cameron <jic23@xxxxxxxxxx> > Acked-by: Vladimir Zapolskiy <vz@xxxxxxxxx> > Signed-off-by: André Gustavo Nakagomi Lopez <andregnl@xxxxxx> Thanks. I tweaked the message a little and added a note that this was not a fix for this particular platform. Good to avoid chance of cut and paste into another driver! Jonathan > --- > Change log V1 -> V2: > -Fixed typo > -Added appropriate Suggested-by and Acked-by tags > drivers/iio/adc/lpc18xx_adc.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/iio/adc/lpc18xx_adc.c b/drivers/iio/adc/lpc18xx_adc.c > index ceefa4d793cf..ae9c9384f23e 100644 > --- a/drivers/iio/adc/lpc18xx_adc.c > +++ b/drivers/iio/adc/lpc18xx_adc.c > @@ -157,9 +157,6 @@ static int lpc18xx_adc_probe(struct platform_device *pdev) > return dev_err_probe(&pdev->dev, PTR_ERR(adc->clk), > "error getting clock\n"); > > - rate = clk_get_rate(adc->clk); > - clkdiv = DIV_ROUND_UP(rate, LPC18XX_ADC_CLK_TARGET); > - > adc->vref = devm_regulator_get(&pdev->dev, "vref"); > if (IS_ERR(adc->vref)) > return dev_err_probe(&pdev->dev, PTR_ERR(adc->vref), > @@ -192,6 +189,9 @@ static int lpc18xx_adc_probe(struct platform_device *pdev) > if (ret) > return ret; > > + rate = clk_get_rate(adc->clk); > + clkdiv = DIV_ROUND_UP(rate, LPC18XX_ADC_CLK_TARGET); > + > adc->cr_reg = (clkdiv << LPC18XX_ADC_CR_CLKDIV_SHIFT) | > LPC18XX_ADC_CR_PDN; > writel(adc->cr_reg, adc->base + LPC18XX_ADC_CR);
