https://bugzilla.kernel.org/show_bug.cgi?id=214751 --- Comment #1 from waleed (waownn@xxxxxxxxx) --- dmesg | grep -i failed [ 7.539736] i2c_hid_acpi i2c-SYTS7817:00: failed to change power setting. [ 7.662541] raydium_ts i2c-RAYD0001:00: failed to get reset gpio: -16 [ 7.794229] raydium_ts: probe of i2c-RAYD0001:00 failed with error -16 [ 8.121999] iwlwifi 0000:01:00.0: pci_enable_msi failed - -22 [ 8.562335] i2c_hid_acpi i2c-SYTS7817:00: failed to change power setting. [ 8.945729] thermal thermal_zone7: failed to read out thermal zone (-61) [ 9.018731] snd_soc_skl 0000:00:1f.3: Direct firmware load for 9d71-GOOGLE-NAMIMAX-0-tplg.bin failed with error -2 [ 9.018735] snd_soc_skl 0000:00:1f.3: tplg fw 9d71-GOOGLE-NAMIMAX-0-tplg.bin load failed with -2, trying alternative tplg name kbl_da7219_mx98357a-tplg.bin [ 9.018751] snd_soc_skl 0000:00:1f.3: Direct firmware load for kbl_da7219_mx98357a-tplg.bin failed with error -2 [ 9.018753] snd_soc_skl 0000:00:1f.3: tplg kbl_da7219_mx98357a-tplg.bin failed with -2, falling back to dfw_sst.bin [ 9.018767] snd_soc_skl 0000:00:1f.3: Direct firmware load for dfw_sst.bin failed with error -2 [ 9.018768] snd_soc_skl 0000:00:1f.3: Fallback tplg fw dfw_sst.bin load failed with -2 [ 9.018804] snd_soc_skl 0000:00:1f.3: Failed to init topology! [ 9.018881] kbl_da7219_max98357a kbl_da7219_mx98357a: ASoC: failed to instantiate card -2 [ 9.019011] kbl_da7219_max98357a: probe of kbl_da7219_mx98357a failed with error -2 [ 9.586869] i2c_hid_acpi i2c-SYTS7817:00: failed to change power setting. [ 10.610851] i2c_hid_acpi i2c-SYTS7817:00: failed to change power setting. [ 11.634548] i2c_hid_acpi: probe of i2c-SYTS7817:00 failed with error -121 -- You may reply to this email to add a comment. You are receiving this mail because: You are watching the assignee of the bug.