Add device tree bindings for the ADRF6780 Upconverter. Reviewed-by: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx> --- no changes in v8 .../bindings/iio/frequency/adi,adrf6780.yaml | 131 ++++++++++++++++++ 1 file changed, 131 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml new file mode 100644 index 000000000000..3a8ea93f4e0c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/frequency/adi,adrf6780.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADRF6780 Microwave Upconverter + +maintainers: + - Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx> + +description: | + Wideband, microwave upconverter optimized for point to point microwave + radio designs operating in the 5.9 GHz to 23.6 GHz frequency range. + + https://www.analog.com/en/products/adrf6780.html + +properties: + compatible: + enum: + - adi,adrf6780 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 1000000 + + clocks: + description: + Definition of the external clock. + minItems: 1 + + clock-names: + items: + - const: lo_in + + clock-output-names: + maxItems: 1 + + adi,vga-buff-en: + description: + RF Variable Gain Amplifier Buffer Enable. Gain is controlled by + the voltage on the VATT pin. + type: boolean + + adi,lo-buff-en: + description: + Local Oscillator Amplifier Enable. Disable to put the part in + a power down state. + type: boolean + + adi,if-mode-en: + description: + Intermediate Frequency Mode Enable. Either IF Mode or I/Q Mode + can be enabled at a time. + type: boolean + + adi,iq-mode-en: + description: + I/Q Mode Enable. Either IF Mode or I/Q Mode can be enabled at a + time. + type: boolean + + adi,lo-x2-en: + description: + Double the Local Oscillator output frequency from the Local + Oscillator Input Frequency. Either LOx1 or LOx2 can be enabled + at a time. + type: boolean + + adi,lo-ppf-en: + description: + Local Oscillator input frequency equal to the Local Oscillator + output frequency (LO x1). Either LOx1 or LOx2 can be enabled + at a time. + type: boolean + + adi,lo-en: + description: + Enable additional cirtuitry in the LO chain. Disable to put the + part in a power down state. + type: boolean + + adi,uc-bias-en: + description: + Enable all bias circuitry thourghout the entire part. + Disable to put the part in a power down state. + type: boolean + + adi,lo-sideband: + description: + Switch to the Lower LO Sideband. By default the Upper LO + sideband is enabled. + type: boolean + + adi,vdet-out-en: + description: + VDET Output Select Enable. Expose the RF detector output to the + VDET external pin. + type: boolean + + '#clock-cells': + const: 0 + +dependencies: + adi,lo-x2-en: [ "adi,lo-en" ] + adi,lo-ppf-en: [ "adi,lo-en" ] + +required: + - compatible + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + adrf6780@0 { + compatible = "adi,adrf6780"; + reg = <0>; + spi-max-frequency = <1000000>; + clocks = <&adrf6780_lo>; + clock-names = "lo_in"; + }; + }; +... -- 2.33.1
