Re: [PATCH v2 2/2] iio: adc: tsc2046: fix sleeping in atomic context warning and a deadlock after iio_trigger_poll() call

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu,  7 Oct 2021 11:30:07 +0200
Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx> wrote:

> If iio_trigger_poll() is called after IRQ was disabled, we will call
> reenable_trigger() directly from hard IRQ or hrtimer context instead of
> IRQ thread. In this case we will run in to multiple issue as sleeping in atomic
> context and a deadlock.
> 
> To avoid this issue, rework the trigger to use state machine. All state
> changes are done over the hrtimer, so it allows us to drop fsleep() and
> avoid the deadlock.
> 
> Even if the root cause of this issue probably will and can be fixed in the iio
> core, this patch can be seen as clean-up to provide better internal state
> machine.
> 
> Fixes: 9374e8f5a38d ("iio: adc: add ADC driver for the TI TSC2046 controller")
> Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>

So, I promised a core fix and haven't sent one yet.

I'm not that keen on this complexity in the driver as to my mind it should need
a complex state machine to deal with this.

Let me knock up a quick patch and then be lazy and ask you to test it for me.
The main delay on that I'd have have figure out a test framework for it rather
than the actual change.

So far I haven't found a clean race free route to ensure in general that we don't
get a lack of balance between trigger occuring + reenable vs enable / disable.
So we may still need some state in the individual drivers but it should be simple.
In this particular case the reference counting on disable_irq may be enough but
I'm not quite sure so you may want to look closely at that.

Jonathan

> ---
>  drivers/iio/adc/ti-tsc2046.c | 102 ++++++++++++++++++++---------------
>  1 file changed, 58 insertions(+), 44 deletions(-)
> 
> diff --git a/drivers/iio/adc/ti-tsc2046.c b/drivers/iio/adc/ti-tsc2046.c
> index d84ae6b008c1..91f6bd5effe7 100644
> --- a/drivers/iio/adc/ti-tsc2046.c
> +++ b/drivers/iio/adc/ti-tsc2046.c
> @@ -123,14 +123,21 @@ struct tsc2046_adc_ch_cfg {
>  	unsigned int oversampling_ratio;
>  };
>  
> +enum tsc2046_state {
> +	TSC2046_STATE_STANDBY,
> +	TSC2046_STATE_ENABLE_IRQ_POLL,
> +	TSC2046_STATE_POLL,
> +	TSC2046_STATE_ENABLE_IRQ,
> +};
> +
>  struct tsc2046_adc_priv {
>  	struct spi_device *spi;
>  	const struct tsc2046_adc_dcfg *dcfg;
>  
>  	struct iio_trigger *trig;
>  	struct hrtimer trig_timer;
> -	spinlock_t trig_lock;
> -	unsigned int trig_more_count;
> +	enum tsc2046_state state;
> +	spinlock_t state_lock;
>  
>  	struct spi_transfer xfer;
>  	struct spi_message msg;
> @@ -411,21 +418,47 @@ static const struct iio_info tsc2046_adc_info = {
>  	.update_scan_mode = tsc2046_adc_update_scan_mode,
>  };
>  
> -static enum hrtimer_restart tsc2046_adc_trig_more(struct hrtimer *hrtimer)
> +static enum hrtimer_restart tsc2046_adc_timer(struct hrtimer *hrtimer)
>  {
>  	struct tsc2046_adc_priv *priv = container_of(hrtimer,
>  						     struct tsc2046_adc_priv,
>  						     trig_timer);
>  	unsigned long flags;
>  
> -	spin_lock_irqsave(&priv->trig_lock, flags);
> -
> -	disable_irq_nosync(priv->spi->irq);
> -
> -	priv->trig_more_count++;
> -	iio_trigger_poll(priv->trig);
> -
> -	spin_unlock_irqrestore(&priv->trig_lock, flags);
> +	spin_lock_irqsave(&priv->state_lock, flags);
> +	switch (priv->state) {
> +	case TSC2046_STATE_ENABLE_IRQ_POLL:
> +		/*
> +		 * IRQ handler called iio_trigger_poll() to sample ADC.
> +		 * Here we
> +		 * - re-enable IRQs
> +		 * - start hrtimer for timeout if no IRQ will occur
> +		 */
> +		priv->state = TSC2046_STATE_POLL;
> +		enable_irq(priv->spi->irq);
> +		hrtimer_start(&priv->trig_timer,
> +			      ns_to_ktime(priv->scan_interval_us *
> +					  NSEC_PER_USEC),
> +			      HRTIMER_MODE_REL_SOFT);
> +		break;
> +	case TSC2046_STATE_POLL:
> +		disable_irq_nosync(priv->spi->irq);
> +		priv->state = TSC2046_STATE_ENABLE_IRQ;
> +		/* iio_trigger_poll() starts hrtimer */
> +		iio_trigger_poll(priv->trig);
> +		break;
> +	case TSC2046_STATE_ENABLE_IRQ:
> +		priv->state = TSC2046_STATE_STANDBY;
> +		enable_irq(priv->spi->irq);
> +		break;
> +	case TSC2046_STATE_STANDBY:
> +		fallthrough;
> +	default:
> +		dev_warn(&priv->spi->dev, "Got unexpected state: %i\n",
> +			 priv->state);
> +		break;
> +	}
> +	spin_unlock_irqrestore(&priv->state_lock, flags);
>  
>  	return HRTIMER_NORESTART;
>  }
> @@ -434,16 +467,17 @@ static irqreturn_t tsc2046_adc_irq(int irq, void *dev_id)
>  {
>  	struct iio_dev *indio_dev = dev_id;
>  	struct tsc2046_adc_priv *priv = iio_priv(indio_dev);
> -
> -	spin_lock(&priv->trig_lock);
> +	unsigned long flags;
>  
>  	hrtimer_try_to_cancel(&priv->trig_timer);
>  
> -	priv->trig_more_count = 0;
> +	spin_lock_irqsave(&priv->state_lock, flags);
>  	disable_irq_nosync(priv->spi->irq);
> -	iio_trigger_poll(priv->trig);
> +	priv->state = TSC2046_STATE_ENABLE_IRQ_POLL;
>  
> -	spin_unlock(&priv->trig_lock);
> +	/* iio_trigger_poll() starts hrtimer */
> +	iio_trigger_poll(priv->trig);
> +	spin_unlock_irqrestore(&priv->state_lock, flags);
>  
>  	return IRQ_HANDLED;
>  }
> @@ -452,37 +486,16 @@ static void tsc2046_adc_reenable_trigger(struct iio_trigger *trig)
>  {
>  	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
>  	struct tsc2046_adc_priv *priv = iio_priv(indio_dev);
> -	unsigned long flags;
> -	int delta;
> +	ktime_t tim;
>  
>  	/*
>  	 * We can sample it as fast as we can, but usually we do not need so
>  	 * many samples. Reduce the sample rate for default (touchscreen) use
>  	 * case.
> -	 * Currently we do not need a highly precise sample rate. It is enough
> -	 * to have calculated numbers.
> -	 */
> -	delta = priv->scan_interval_us - priv->time_per_scan_us;
> -	if (delta > 0)
> -		fsleep(delta);
> -
> -	spin_lock_irqsave(&priv->trig_lock, flags);
> -
> -	/*
> -	 * We need to trigger at least one extra sample to detect state
> -	 * difference on ADC side.
>  	 */
> -	if (!priv->trig_more_count) {
> -		int timeout_ms = DIV_ROUND_UP(priv->scan_interval_us,
> -					      USEC_PER_MSEC);
> -
> -		hrtimer_start(&priv->trig_timer, ms_to_ktime(timeout_ms),
> -			      HRTIMER_MODE_REL_SOFT);
> -	}
> -
> -	enable_irq(priv->spi->irq);
> -
> -	spin_unlock_irqrestore(&priv->trig_lock, flags);
> +	tim = ns_to_ktime((priv->scan_interval_us - priv->time_per_scan_us) *
> +			  NSEC_PER_USEC);
> +	hrtimer_start(&priv->trig_timer, tim, HRTIMER_MODE_REL_SOFT);
>  }
>  
>  static int tsc2046_adc_set_trigger_state(struct iio_trigger *trig, bool enable)
> @@ -493,8 +506,8 @@ static int tsc2046_adc_set_trigger_state(struct iio_trigger *trig, bool enable)
>  	if (enable) {
>  		enable_irq(priv->spi->irq);
>  	} else {
> +		hrtimer_cancel(&priv->trig_timer);
>  		disable_irq(priv->spi->irq);
> -		hrtimer_try_to_cancel(&priv->trig_timer);
>  	}
>  
>  	return 0;
> @@ -668,10 +681,11 @@ static int tsc2046_adc_probe(struct spi_device *spi)
>  	iio_trigger_set_drvdata(trig, indio_dev);
>  	trig->ops = &tsc2046_adc_trigger_ops;
>  
> -	spin_lock_init(&priv->trig_lock);
> +	spin_lock_init(&priv->state_lock);
> +	priv->state = TSC2046_STATE_STANDBY;
>  	hrtimer_init(&priv->trig_timer, CLOCK_MONOTONIC,
>  		     HRTIMER_MODE_REL_SOFT);
> -	priv->trig_timer.function = tsc2046_adc_trig_more;
> +	priv->trig_timer.function = tsc2046_adc_timer;
>  
>  	ret = devm_iio_trigger_register(dev, trig);
>  	if (ret) {




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux