On Thu, 14 Oct 2021 10:45:36 +0300 Alexandru Ardelean <ardeleanalex@xxxxxxxxx> wrote: > On Wed, Oct 13, 2021 at 11:33 PM Uwe Kleine-König > <u.kleine-koenig@xxxxxxxxxxxxxx> wrote: > > > > Hello, > > > > this series is part of my quest to change the return type of the spi > > driver .remove() callback to void. In this first stage I fix all drivers > > to return 0 to be able to mechanically change all drivers in the final > > step. > > > > Returning an error code (which actually very few drivers do) doesn't > > make much sense, because the only effect is that the spi core emits an > > error message. > > > > The same holds try for i2c drivers, some of them are fixed en passant. > > > > There are no interdependencies in this series, and there is some more > > work to do for the final conversion, so apply the patches from this > > series at will :-) > > > > Series looks good. > However this set also makes a case for doing more conversions to devm_ > usage in probe. Indeed. 2 of these were already done :) Rest of the series applied to the togreg branch of iio.git and pushed out as testing for 0-day to poke at it and see if we missed anything. Thanks, Jonathan > > With devm_ , we get slightly less code, with some mirrored unwinding > in error and remove paths. > There are currently ~170 places (not necessarily the same amount of > drivers), where devm_ can be used. > > What I typically do is run this command in a kernel tree: "git grep > -w iio_device_unregister | wc -l" > When I run it without "wc -l", I will pick a file and take a look > inside it and check it's convertibility to using > devm_iio_device_unregister() > The rationale is, that for IIO drivers, if you get > devm_iio_device_unregister() (properly) called last, then it's fully > converted to devm_ functions. > > For this series particularly: > > Reviewed-by: Alexandru Ardelean <ardeleanalex@xxxxxxxxx> > > > Best regards > > Uwe > > > > Uwe Kleine-König (15): > > iio: accel: bma400: Make bma400_remove() return void > > iio: accel: bmc150: Make bmc150_accel_core_remove() return void > > iio: accel: bmi088: Make bmi088_accel_core_remove() return void > > iio: accel: kxsd9: Make kxsd9_common_remove() return void > > iio: accel: mma7455: Make mma7455_core_remove() return void > > iio: accel: ad5064: Make ad5064_core_remove() return void > > iio: dac: ad5380: Make ad5380_remove() return void > > iio: dac: ad5446: Make ad5446_remove() return void > > iio: dac: ad5592r: Make ad5592r_remove() return void > > iio: dac: ad5686: Make ad5686_remove() return void > > iio: health: afe4403: Don't return an error in .remove() > > iio: imu: st_lsm9ds0: Make st_lsm9ds0_remove() return void > > iio: magn: hmc5843: Make hmc5843_common_remove() return void > > iio: potentiometer: max5487: Don't return an error in .remove() > > iio: pressure: ms5611: Make ms5611_remove() return void > > > > drivers/iio/accel/bma400.h | 2 +- > > drivers/iio/accel/bma400_core.c | 7 ++++--- > > drivers/iio/accel/bma400_i2c.c | 4 +++- > > drivers/iio/accel/bma400_spi.c | 4 +++- > > drivers/iio/accel/bmc150-accel-core.c | 4 +--- > > drivers/iio/accel/bmc150-accel-i2c.c | 4 +++- > > drivers/iio/accel/bmc150-accel-spi.c | 4 +++- > > drivers/iio/accel/bmc150-accel.h | 2 +- > > drivers/iio/accel/bmi088-accel-core.c | 4 +--- > > drivers/iio/accel/bmi088-accel-spi.c | 4 +++- > > drivers/iio/accel/bmi088-accel.h | 2 +- > > drivers/iio/accel/kxsd9-i2c.c | 4 +++- > > drivers/iio/accel/kxsd9-spi.c | 4 +++- > > drivers/iio/accel/kxsd9.c | 4 +--- > > drivers/iio/accel/kxsd9.h | 2 +- > > drivers/iio/accel/mma7455.h | 2 +- > > drivers/iio/accel/mma7455_core.c | 4 +--- > > drivers/iio/accel/mma7455_i2c.c | 4 +++- > > drivers/iio/accel/mma7455_spi.c | 4 +++- > > drivers/iio/dac/ad5064.c | 12 +++++++----- > > drivers/iio/dac/ad5380.c | 15 ++++++++------- > > drivers/iio/dac/ad5446.c | 12 +++++++----- > > drivers/iio/dac/ad5592r-base.c | 4 +--- > > drivers/iio/dac/ad5592r-base.h | 2 +- > > drivers/iio/dac/ad5592r.c | 4 +++- > > drivers/iio/dac/ad5593r.c | 4 +++- > > drivers/iio/dac/ad5686-spi.c | 4 +++- > > drivers/iio/dac/ad5686.c | 4 +--- > > drivers/iio/dac/ad5686.h | 2 +- > > drivers/iio/dac/ad5696-i2c.c | 4 +++- > > drivers/iio/health/afe4403.c | 6 ++---- > > drivers/iio/imu/st_lsm9ds0/st_lsm9ds0.h | 2 +- > > drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c | 4 +--- > > drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c | 4 +++- > > drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c | 4 +++- > > drivers/iio/magnetometer/hmc5843.h | 2 +- > > drivers/iio/magnetometer/hmc5843_core.c | 4 +--- > > drivers/iio/magnetometer/hmc5843_i2c.c | 4 +++- > > drivers/iio/magnetometer/hmc5843_spi.c | 4 +++- > > drivers/iio/potentiometer/max5487.c | 7 ++++++- > > drivers/iio/pressure/ms5611.h | 2 +- > > drivers/iio/pressure/ms5611_core.c | 4 +--- > > drivers/iio/pressure/ms5611_i2c.c | 4 +++- > > drivers/iio/pressure/ms5611_spi.c | 4 +++- > > 44 files changed, 110 insertions(+), 81 deletions(-) > > > > > > base-commit: 9e1ff307c779ce1f0f810c7ecce3d95bbae40896 > > -- > > 2.30.2 > >
