We don't expect the (hardware) cnvst trigger to be enabled at boot time, this is a user choice made in sysfs and there is a dedicated callback to enable/disable this trigger. Hence, we can just ensure it is disabled in the probe at initialization time and then assume that whenever a ->read_raw() call happens, the trigger has been disabled and conversions will start on register write. Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx> --- drivers/iio/adc/max1027.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/iio/adc/max1027.c b/drivers/iio/adc/max1027.c index b7cc77c2c01d..62570953653a 100644 --- a/drivers/iio/adc/max1027.c +++ b/drivers/iio/adc/max1027.c @@ -302,10 +302,6 @@ static int max1027_read_single_value(struct iio_dev *indio_dev, return -EBUSY; } - ret = max1027_enable_trigger(indio_dev, false); - if (ret) - return ret; - /* Configure conversion register with the requested chan */ st->reg = MAX1027_CONV_REG | MAX1027_CHAN(chan->channel) | MAX1027_NOSCAN; @@ -557,6 +553,11 @@ static int max1027_probe(struct spi_device *spi) return ret; } + /* Assume conversion on register write for now */ + ret = max1027_enable_trigger(indio_dev, false); + if (ret) + return ret; + return devm_iio_device_register(&spi->dev, indio_dev); } -- 2.27.0
