The following changes since commit e73f0f0ee7541171d89f2e2491130c7771ba58d3: Linux 5.14-rc1 (2021-07-11 15:07:40 -0700) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-fixes-5.14a for you to fetch changes up to 5afc1540f13804a31bb704b763308e17688369c5: iio: adc: Fix incorrect exit of for-loop (2021-07-31 14:46:05 +0100) ---------------------------------------------------------------- First set of fixes for IIO in the 5.14 cycle adi,adis: - Ensure GPIO pin direction set explicitly in driver. fxls8952af: - Fix use of ret when not initialized. - Fix issue with use of module symbol from built in. hdc100x: - Add a margin to conversion time as some parts run to slowly. palmas-adc: - Fix a wrong exit condition that leads to adc period always being set to maximum value. st,sensors: - Drop a wrong restriction on number of interrupts in dt binding. ti-ads7950: - Ensure CS deasserted after channel read. ---------------------------------------------------------------- Antti Keränen (1): iio: adis: set GPIO reset pin direction Arnd Bergmann (1): iio: accel: fxls8962af: fix i2c dependency Chris Lesiak (1): iio: humidity: hdc100x: Add margin to the conversion time Colin Ian King (1): iio: adc: Fix incorrect exit of for-loop Maxime Ripard (1): dt-bindings: iio: st: Remove wrong items length check Sean Nyekjaer (1): iio: accel: fxls8962af: fix potential use of uninitialized symbol Uwe Kleine-König (1): iio: adc: ti-ads7950: Ensure CS is deasserted after reading channels .../devicetree/bindings/iio/st,st-sensors.yaml | 41 ---------------------- drivers/iio/accel/Kconfig | 2 ++ drivers/iio/accel/fxls8962af-core.c | 2 +- drivers/iio/adc/palmas_gpadc.c | 4 +-- drivers/iio/adc/ti-ads7950.c | 1 - drivers/iio/humidity/hdc100x.c | 6 ++-- drivers/iio/imu/adis.c | 3 +- 7 files changed, 10 insertions(+), 49 deletions(-)
