On Sun, 18 Jul 2021 14:31:28 -0700
Matt Ranostay <matt.ranostay@xxxxxxxxxxxx> wrote:
> On Sun, Jul 18, 2021 at 7:49 AM Jonathan Cameron <jic23@xxxxxxxxxx> wrote:
> >
> > On Wed, 16 Jun 2021 13:43:35 +0100
> > Jonathan Cameron <jic23@xxxxxxxxxx> wrote:
> >
> > > On Mon, 14 Jun 2021 09:18:20 -0500
> > > Chris Lesiak <chris.lesiak@xxxxxxxxx> wrote:
> > >
> > > > The datasheets have the following note for the conversion time
> > > > specification: "This parameter is specified by design and/or
> > > > characterization and it is not tested in production."
> > > >
> > > > Parts have been seen that require more time to do 14-bit conversions for
> > > > the relative humidity channel. The result is ENXIO due to the address
> > > > phase of a transfer not getting an ACK.
> > > >
> > > > Delay an additional 1 ms per conversion to allow for additional margin.
> > > >
> > > > Fixes: 4839367d99e3 ("iio: humidity: add HDC100x support")
> > > > Signed-off-by: Chris Lesiak <chris.lesiak@xxxxxxxxx>
> > >
> > > +CC Matt as this is one of his drivers.
> >
> > @Matt. Ping.
> >
> > >
> > > Looks good to me.
>
> Looks good to me as well.
>
> Acked-by: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
Thanks.
Applied to the fixes-togreg branch of iio.git and marked for stable.
Jonathan
>
> > >
> > > > ---
> > > > drivers/iio/humidity/hdc100x.c | 6 ++++--
> > > > 1 file changed, 4 insertions(+), 2 deletions(-)
> > > >
> > > > diff --git a/drivers/iio/humidity/hdc100x.c b/drivers/iio/humidity/hdc100x.c
> > > > index 2a957f19048e..9e0fce917ce4 100644
> > > > --- a/drivers/iio/humidity/hdc100x.c
> > > > +++ b/drivers/iio/humidity/hdc100x.c
> > > > @@ -25,6 +25,8 @@
> > > > #include <linux/iio/trigger_consumer.h>
> > > > #include <linux/iio/triggered_buffer.h>
> > > >
> > > > +#include <linux/time.h>
> > > > +
> > > > #define HDC100X_REG_TEMP 0x00
> > > > #define HDC100X_REG_HUMIDITY 0x01
> > > >
> > > > @@ -166,7 +168,7 @@ static int hdc100x_get_measurement(struct hdc100x_data *data,
> > > > struct iio_chan_spec const *chan)
> > > > {
> > > > struct i2c_client *client = data->client;
> > > > - int delay = data->adc_int_us[chan->address];
> > > > + int delay = data->adc_int_us[chan->address] + 1*USEC_PER_MSEC;
> > > > int ret;
> > > > __be16 val;
> > > >
> > > > @@ -316,7 +318,7 @@ static irqreturn_t hdc100x_trigger_handler(int irq, void *p)
> > > > struct iio_dev *indio_dev = pf->indio_dev;
> > > > struct hdc100x_data *data = iio_priv(indio_dev);
> > > > struct i2c_client *client = data->client;
> > > > - int delay = data->adc_int_us[0] + data->adc_int_us[1];
> > > > + int delay = data->adc_int_us[0] + data->adc_int_us[1] + 2*USEC_PER_MSEC;
> > > > int ret;
> > > >
> > > > /* dual read starts at temp register */
> > >
> >
