On Fri, 9 Jul 2021 11:39:48 -0500
David Lechner <david@xxxxxxxxxxxxxx> wrote:
> On 7/9/21 5:11 AM, Uwe Kleine-König wrote:
> > The ADS7950 requires that CS is deasserted after each SPI word. Before
> > commit e2540da86ef8 ("iio: adc: ti-ads7950: use SPI_CS_WORD to reduce
> > CPU usage") the driver used a message with one spi transfer per channel
> > where each but the last one had .cs_change set to enforce a CS toggle.
> > This was wrongly translated into a message with a single transfer and
> > .cs_change set which results in a CS toggle after each word but the
> > last which corrupts the first adc conversion of all readouts after the
> > first readout.
> >
> > Fixes: e2540da86ef8 ("iio: adc: ti-ads7950: use SPI_CS_WORD to reduce CPU usage")
> > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
> > ---
> > drivers/iio/adc/ti-ads7950.c | 1 -
> > 1 file changed, 1 deletion(-)
> >
> > diff --git a/drivers/iio/adc/ti-ads7950.c b/drivers/iio/adc/ti-ads7950.c
> > index 2383eacada87..a2b83f0bd526 100644
> > --- a/drivers/iio/adc/ti-ads7950.c
> > +++ b/drivers/iio/adc/ti-ads7950.c
> > @@ -568,7 +568,6 @@ static int ti_ads7950_probe(struct spi_device *spi)
> > st->ring_xfer.tx_buf = &st->tx_buf[0];
> > st->ring_xfer.rx_buf = &st->rx_buf[0];
> > /* len will be set later */
> > - st->ring_xfer.cs_change = true;
> >
> > spi_message_add_tail(&st->ring_xfer, &st->ring_msg);
> >
> >
>
> Yes, it seems like the SPI_CS_WORD flag should have replaced this (it's
> been too long, I can't remember if it was intentional). And removing it
> doesn't seem to break anything for me.
>
> Reviewed-by: David Lechner <david@xxxxxxxxxxxxxx>
> Tested-by: David Lechner <david@xxxxxxxxxxxxxx>
Applied to the fixes-togreg branch of iio.git and marked for stable.
Thanks,
Jonathan
