Re: [PATCH 1/2] dt-bindings: iio: adc: Add binding documentation for Renesas RZ/G2L A/D converter

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob,

Thank you for the review.

On Thu, Jul 1, 2021 at 9:21 PM Rob Herring <robh@xxxxxxxxxx> wrote:
>
> On Tue, Jun 29, 2021 at 11:03:27PM +0100, Lad Prabhakar wrote:
> > Add binding documentation for Renesas RZ/G2L A/D converter block.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > Reviewed-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > ---
> >  .../bindings/iio/adc/renesas,rzg2l-adc.yaml   | 121 ++++++++++++++++++
> >  1 file changed, 121 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml b/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml
> > new file mode 100644
> > index 000000000000..db935d6d59eb
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml
> > @@ -0,0 +1,121 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/iio/adc/renesas,rzg2l-adc.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Renesas RZ/G2L ADC
> > +
> > +maintainers:
> > +  - Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > +
> > +description: |
> > +  A/D Converter block is a successive approximation analog-to-digital converter
> > +  with a 12-bit accuracy. Up to eight analog input channels can be selected.
> > +  Conversions can be performed in single or repeat mode. Result of the ADC is
> > +  stored in a 32-bit data register corresponding to each channel.
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
>
> You can drop oneOf here.
>
Dropping oneOf from here dt_binding_check complains with below report,
Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml:
properties:compatible: [{'items': [{'enum':
['renesas,r9a07g044-adc']}, {'const': 'renesas,rzg2l-adc'}]}] is not
of type 'object', 'boolean'
from schema $id: http://json-schema.org/draft-07/schema#

> > +      - items:
> > +          - enum:
> > +              - renesas,r9a07g044-adc   # RZ/G2{L,LC}
> > +          - const: renesas,rzg2l-adc
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    items:
> > +      - description: converter clock
> > +      - description: peripheral clock
> > +
> > +  clock-names:
> > +    items:
> > +      - const: adclk
> > +      - const: pclk
> > +
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  resets:
> > +    maxItems: 2
> > +
> > +  reset-names:
> > +    items:
> > +      - const: presetn
> > +      - const: adrst-n
> > +
> > +  renesas-rzg2l,adc-trigger-mode:
> > +    $ref: /schemas/types.yaml#/definitions/uint8
> > +    description: Trigger mode for A/D converter
> > +    enum:
> > +      - 0 # Software trigger mode (Defaults)
> > +      - 1 # Asynchronous trigger using ADC_TRG trigger input pin
> > +      - 2 # Synchronous trigger (Trigger from MTU3a/GPT)
> > +    default: 0
> > +
> > +  gpios:
>
> A named gpio is preferred. trigger-gpios?
>
Agreed.

Cheers,
Prabhakar

> > +    description:
> > +      ADC_TRG trigger input pin
> > +    maxItems: 1
> > +
> > +  renesas-rzg2l,adc-channels:
> > +    $ref: /schemas/types.yaml#/definitions/uint8-array
> > +    description: Input channels available on platform
> > +    uniqueItems: true
> > +    minItems: 1
> > +    maxItems: 8
> > +    items:
> > +      enum: [0, 1, 2, 3, 4, 5, 6, 7]
> > +
> > +  "#io-channel-cells":
> > +    const: 1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - clocks
> > +  - clock-names
> > +  - power-domains
> > +  - resets
> > +  - reset-names
> > +  - renesas-rzg2l,adc-channels
> > +  - "#io-channel-cells"
> > +
> > +allOf:
> > +  - if:
> > +      properties:
> > +        renesas-rzg2l,adc-trigger-mode:
> > +          const: 1
> > +    then:
> > +      required:
> > +        - gpios
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/r9a07g044-cpg.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +    adc: adc@10059000 {
> > +      compatible = "renesas,r9a07g044-adc", "renesas,rzg2l-adc";
> > +      reg = <0x10059000 0x400>;
> > +      interrupts = <GIC_SPI 347 IRQ_TYPE_EDGE_RISING>;
> > +      clocks = <&cpg CPG_MOD R9A07G044_ADC_ADCLK>,
> > +               <&cpg CPG_MOD R9A07G044_ADC_PCLK>;
> > +      clock-names = "adclk", "pclk";
> > +      power-domains = <&cpg>;
> > +      resets = <&cpg R9A07G044_ADC_PRESETN>,
> > +               <&cpg R9A07G044_ADC_ADRST_N>;
> > +      reset-names = "presetn", "adrst-n";
> > +      #io-channel-cells = <1>;
> > +      renesas-rzg2l,adc-trigger-mode = /bits/ 8 <0>;
> > +      renesas-rzg2l,adc-channels = /bits/ 8 <0 1 2 3 4 5 6>;
> > +    };
> > --
> > 2.17.1
> >
> >



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux