RE: [PATCH v1 4/4] dt-bindings: iio: adc: ad7949: add adi,reference-source

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> -----Original Message-----
> From: Liam Beguin <liambeguin@xxxxxxxxx>
> Sent: Friday, July 9, 2021 1:56 AM
> To: liambeguin@xxxxxxxxx; lars@xxxxxxxxxx; Hennerich, Michael
> <Michael.Hennerich@xxxxxxxxxx>; jic23@xxxxxxxxxx; charles-
> antoine.couret@xxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx; linux-iio@xxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; robh+dt@xxxxxxxxxx
> Subject: [PATCH v1 4/4] dt-bindings: iio: adc: ad7949: add
> adi,reference-source
> 
> [External]
> 
> From: Liam Beguin <lvb@xxxxxxxxxx>
> 
> Add bindings documentation for the adi,reference-source property.
> This property is required to properly configure the ADC sample request
> based on which reference source should be used for the calculation.
> 
> Signed-off-by: Liam Beguin <lvb@xxxxxxxxxx>
> ---
>  .../bindings/iio/adc/adi,ad7949.yaml          | 22 +++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git
> a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
> b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
> index 9b56bd4d5510..3f4629281cc8 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
> @@ -35,6 +35,28 @@ properties:
>    "#io-channel-cells":
>      const: 1
> 
> +  adi,reference-select:
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32
> +      - enum: [0, 1, 2, 3, 6, 7]
> +
> +    default: 7
> +    description: |
> +      Select the reference voltage source to use when converting
> samples.
> +      Acceptable values are:
> +      - 0: Internal reference and temperature sensor enabled.
> +           Vref=2.5V, buffered output
> +      - 1: Internal reference and temperature sensor enabled.
> +           Vref=4.096V, buffered output
> +      - 2: Use external reference, temperature sensor enabled.
> +           Internal buffer disabled
> +      - 3: Use external reference, internal buffer and temperature
> sensor
> +           enabled.
> +      - 6: Use external reference, internal buffer and temperature
> sensor
> +           disabled.
> +      - 7: Use external reference, internal buffer enabled.
> +           Internal reference and temperature sensor disabled.

I think typically the description comes first. I also don't think you
need the 'allOf'(not even sure if it will pass the binding check)...
Just have '$ref' and 'enum' on the same level.

- Nuno Sá

>  required:
>    - compatible
>    - reg
> --
> 2.30.1.489.g328c10930387





[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux