On Sun, 23 May 2021 at 19:24, Jonathan Cameron <jic23@xxxxxxxxxx> wrote:
>
> From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
>
> The error handling in here left runtime pm enabled, and didn't do the
> same steps as occurred in remove. Moving over to fully devm_ managed
> makes it harder to get this stuff wrong, so let's do that.
>
Reviewed-by: Alexandru Ardelean <aardelean@xxxxxxxxxxx>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
> ---
> drivers/iio/accel/mma9553.c | 70 ++++++++++++++++++++-----------------
> 1 file changed, 37 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/iio/accel/mma9553.c b/drivers/iio/accel/mma9553.c
> index dc2a3316c1a3..14a9d5fedc06 100644
> --- a/drivers/iio/accel/mma9553.c
> +++ b/drivers/iio/accel/mma9553.c
> @@ -375,6 +375,15 @@ static int mma9553_conf_gpio(struct mma9553_data *data)
> return 0;
> }
>
> +static void mma9553_disable_cb(void *_data)
> +{
> + struct mma9553_data *data = _data;
> +
> + mutex_lock(&data->mutex);
> + mma9551_set_device_state(data->client, false);
> + mutex_unlock(&data->mutex);
> +}
> +
> static int mma9553_init(struct mma9553_data *data)
> {
> int ret;
> @@ -430,7 +439,11 @@ static int mma9553_init(struct mma9553_data *data)
> return ret;
> }
>
> - return mma9551_set_device_state(data->client, true);
> + ret = mma9551_set_device_state(data->client, true);
> + if (ret)
> + return ret;
> +
> + return devm_add_action_or_reset(&data->client->dev, mma9553_disable_cb, data);
> }
>
> static int mma9553_read_status_word(struct mma9553_data *data, u16 reg,
> @@ -1062,6 +1075,16 @@ static irqreturn_t mma9553_event_handler(int irq, void *private)
> return IRQ_HANDLED;
> }
>
> +static void mma9553_rpm_set_susp(void *d)
> +{
> + pm_runtime_set_suspended(d);
> +}
> +
> +static void mma9553_rpm_disable(void *d)
> +{
> + pm_runtime_disable(d);
> +}
> +
> static int mma9553_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> @@ -1105,48 +1128,30 @@ static int mma9553_probe(struct i2c_client *client,
> if (ret < 0) {
> dev_err(&client->dev, "request irq %d failed\n",
> client->irq);
> - goto out_poweroff;
> + return ret;
> }
> }
>
> ret = pm_runtime_set_active(&client->dev);
> if (ret < 0)
> - goto out_poweroff;
> + return ret;
> +
> + ret = devm_add_action_or_reset(&client->dev, mma9553_rpm_set_susp,
> + &client->dev);
> + if (ret)
> + return ret;
>
> pm_runtime_enable(&client->dev);
> + ret = devm_add_action_or_reset(&client->dev, mma9553_rpm_disable,
> + &client->dev);
> + if (ret)
> + return ret;
> +
> pm_runtime_set_autosuspend_delay(&client->dev,
> MMA9551_AUTO_SUSPEND_DELAY_MS);
> pm_runtime_use_autosuspend(&client->dev);
>
> - ret = iio_device_register(indio_dev);
> - if (ret < 0) {
> - dev_err(&client->dev, "unable to register iio device\n");
> - goto out_poweroff;
> - }
> -
> - dev_dbg(&indio_dev->dev, "Registered device %s\n", name);
> - return 0;
> -
> -out_poweroff:
> - mma9551_set_device_state(client, false);
> - return ret;
> -}
> -
> -static int mma9553_remove(struct i2c_client *client)
> -{
> - struct iio_dev *indio_dev = i2c_get_clientdata(client);
> - struct mma9553_data *data = iio_priv(indio_dev);
> -
> - iio_device_unregister(indio_dev);
> -
> - pm_runtime_disable(&client->dev);
> - pm_runtime_set_suspended(&client->dev);
> -
> - mutex_lock(&data->mutex);
> - mma9551_set_device_state(data->client, false);
> - mutex_unlock(&data->mutex);
> -
> - return 0;
> + return devm_iio_device_register(&client->dev, indio_dev);
> }
>
> static __maybe_unused int mma9553_runtime_suspend(struct device *dev)
> @@ -1200,7 +1205,6 @@ static struct i2c_driver mma9553_driver = {
> .pm = &mma9553_pm_ops,
> },
> .probe = mma9553_probe,
> - .remove = mma9553_remove,
> .id_table = mma9553_id,
> };
>
> --
> 2.31.1
>
