Further patches to bmc150-accel-i2c.c need to store some extra info
(on top of the second_dev pointer) in the bmc150_accel_data struct,
rather then adding yet more accessor functions for this lets just
move the struct bmc150_accel_data definition to bmc150-accel.h.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/iio/accel/bmc150-accel-core.c | 53 -----------------------
drivers/iio/accel/bmc150-accel.h | 61 +++++++++++++++++++++++++++
2 files changed, 61 insertions(+), 53 deletions(-)
diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c
index 8ff358c37a81..0d76df9e08eb 100644
--- a/drivers/iio/accel/bmc150-accel-core.c
+++ b/drivers/iio/accel/bmc150-accel-core.c
@@ -157,59 +157,6 @@ struct bmc150_accel_chip_info {
const struct bmc150_scale_info scale_table[4];
};
-struct bmc150_accel_interrupt {
- const struct bmc150_accel_interrupt_info *info;
- atomic_t users;
-};
-
-struct bmc150_accel_trigger {
- struct bmc150_accel_data *data;
- struct iio_trigger *indio_trig;
- int (*setup)(struct bmc150_accel_trigger *t, bool state);
- int intr;
- bool enabled;
-};
-
-enum bmc150_accel_interrupt_id {
- BMC150_ACCEL_INT_DATA_READY,
- BMC150_ACCEL_INT_ANY_MOTION,
- BMC150_ACCEL_INT_WATERMARK,
- BMC150_ACCEL_INTERRUPTS,
-};
-
-enum bmc150_accel_trigger_id {
- BMC150_ACCEL_TRIGGER_DATA_READY,
- BMC150_ACCEL_TRIGGER_ANY_MOTION,
- BMC150_ACCEL_TRIGGERS,
-};
-
-struct bmc150_accel_data {
- struct regmap *regmap;
- struct regulator_bulk_data regulators[2];
- struct bmc150_accel_interrupt interrupts[BMC150_ACCEL_INTERRUPTS];
- struct bmc150_accel_trigger triggers[BMC150_ACCEL_TRIGGERS];
- struct mutex mutex;
- u8 fifo_mode, watermark;
- s16 buffer[8];
- /*
- * Ensure there is sufficient space and correct alignment for
- * the timestamp if enabled
- */
- struct {
- __le16 channels[3];
- s64 ts __aligned(8);
- } scan;
- u8 bw_bits;
- u32 slope_dur;
- u32 slope_thres;
- u32 range;
- int ev_enable_state;
- int64_t timestamp, old_timestamp; /* Only used in hw fifo mode. */
- const struct bmc150_accel_chip_info *chip_info;
- struct i2c_client *second_device;
- struct iio_mount_matrix orientation;
-};
-
static const struct {
int val;
int val2;
diff --git a/drivers/iio/accel/bmc150-accel.h b/drivers/iio/accel/bmc150-accel.h
index e30c1698f6fb..f503c5b5801e 100644
--- a/drivers/iio/accel/bmc150-accel.h
+++ b/drivers/iio/accel/bmc150-accel.h
@@ -2,7 +2,68 @@
#ifndef _BMC150_ACCEL_H_
#define _BMC150_ACCEL_H_
+#include <linux/atomic.h>
+#include <linux/iio/iio.h>
+#include <linux/mutex.h>
+#include <linux/regulator/consumer.h>
+
struct regmap;
+struct i2c_client;
+struct bmc150_accel_chip_info;
+struct bmc150_accel_interrupt_info;
+
+struct bmc150_accel_interrupt {
+ const struct bmc150_accel_interrupt_info *info;
+ atomic_t users;
+};
+
+struct bmc150_accel_trigger {
+ struct bmc150_accel_data *data;
+ struct iio_trigger *indio_trig;
+ int (*setup)(struct bmc150_accel_trigger *t, bool state);
+ int intr;
+ bool enabled;
+};
+
+enum bmc150_accel_interrupt_id {
+ BMC150_ACCEL_INT_DATA_READY,
+ BMC150_ACCEL_INT_ANY_MOTION,
+ BMC150_ACCEL_INT_WATERMARK,
+ BMC150_ACCEL_INTERRUPTS,
+};
+
+enum bmc150_accel_trigger_id {
+ BMC150_ACCEL_TRIGGER_DATA_READY,
+ BMC150_ACCEL_TRIGGER_ANY_MOTION,
+ BMC150_ACCEL_TRIGGERS,
+};
+
+struct bmc150_accel_data {
+ struct regmap *regmap;
+ struct regulator_bulk_data regulators[2];
+ struct bmc150_accel_interrupt interrupts[BMC150_ACCEL_INTERRUPTS];
+ struct bmc150_accel_trigger triggers[BMC150_ACCEL_TRIGGERS];
+ struct mutex mutex;
+ u8 fifo_mode, watermark;
+ s16 buffer[8];
+ /*
+ * Ensure there is sufficient space and correct alignment for
+ * the timestamp if enabled
+ */
+ struct {
+ __le16 channels[3];
+ s64 ts __aligned(8);
+ } scan;
+ u8 bw_bits;
+ u32 slope_dur;
+ u32 slope_thres;
+ u32 range;
+ int ev_enable_state;
+ int64_t timestamp, old_timestamp; /* Only used in hw fifo mode. */
+ const struct bmc150_accel_chip_info *chip_info;
+ struct i2c_client *second_device;
+ struct iio_mount_matrix orientation;
+};
enum {
bmc150,
--
2.31.1
