Re: [PATCH 8/8] iio: adc: ti-adc161s626: Use devm managed functions for all of probe.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 16 May 2021 at 20:26, Jonathan Cameron <jic23@xxxxxxxxxx> wrote:
>
> From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
>
> Simplifies error handling and allows us to drop remove entirely.
>
> The regulator handling in this driver was unusual as it would try to
> acquire the regulator, but if that failed with an error would continue.
>
> We should get a stub regulator if one isn't provided in DT and an error
> could indicate an actual problem preventing the device being powered
> (perhaps a need to defer). So this handling is cleaned up (arguably
> that might be a fix but given no one has run into it, I haven't broken
> it out separately.
>

This patch forgets to remove "spi_set_drvdata(spi, indio_dev);"
With that fixed

Reviewed-by: Alexandru Ardelean <aardelean@xxxxxxxxxxx>

> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
> Cc: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
> ---
>  drivers/iio/adc/ti-adc161s626.c | 50 ++++++++++++---------------------
>  1 file changed, 18 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/iio/adc/ti-adc161s626.c b/drivers/iio/adc/ti-adc161s626.c
> index 607791ffe7f0..9f2f25cf9a49 100644
> --- a/drivers/iio/adc/ti-adc161s626.c
> +++ b/drivers/iio/adc/ti-adc161s626.c
> @@ -169,6 +169,11 @@ static const struct iio_info ti_adc_info = {
>         .read_raw = ti_adc_read_raw,
>  };
>
> +static void ti_adc_reg_disable(void *reg)
> +{
> +       regulator_disable(reg);
> +}
> +
>  static int ti_adc_probe(struct spi_device *spi)
>  {
>         struct iio_dev *indio_dev;
> @@ -203,42 +208,24 @@ static int ti_adc_probe(struct spi_device *spi)
>         }
>
>         data->ref = devm_regulator_get(&spi->dev, "vdda");
> -       if (!IS_ERR(data->ref)) {
> -               ret = regulator_enable(data->ref);
> -               if (ret < 0)
> -                       return ret;
> -       }
> +       if (IS_ERR(data->ref))
> +               return PTR_ERR(data->ref);
>
> -       ret = iio_triggered_buffer_setup(indio_dev, NULL,
> -                                        ti_adc_trigger_handler, NULL);
> -       if (ret)
> -               goto error_regulator_disable;
> +       ret = regulator_enable(data->ref);
> +       if (ret < 0)
> +               return ret;
>
> -       ret = iio_device_register(indio_dev);
> +       ret = devm_add_action_or_reset(&spi->dev, ti_adc_reg_disable,
> +                                      data->ref);
>         if (ret)
> -               goto error_unreg_buffer;
> -
> -       return 0;
> +               return ret;
>
> -error_unreg_buffer:
> -       iio_triggered_buffer_cleanup(indio_dev);
> -
> -error_regulator_disable:
> -       regulator_disable(data->ref);
> -
> -       return ret;
> -}
> -
> -static int ti_adc_remove(struct spi_device *spi)
> -{
> -       struct iio_dev *indio_dev = spi_get_drvdata(spi);
> -       struct ti_adc_data *data = iio_priv(indio_dev);
> -
> -       iio_device_unregister(indio_dev);
> -       iio_triggered_buffer_cleanup(indio_dev);
> -       regulator_disable(data->ref);
> +       ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev, NULL,
> +                                             ti_adc_trigger_handler, NULL);
> +       if (ret)
> +               return ret;
>
> -       return 0;
> +       return devm_iio_device_register(&spi->dev, indio_dev);
>  }
>
>  static const struct of_device_id ti_adc_dt_ids[] = {
> @@ -261,7 +248,6 @@ static struct spi_driver ti_adc_driver = {
>                 .of_match_table = ti_adc_dt_ids,
>         },
>         .probe          = ti_adc_probe,
> -       .remove         = ti_adc_remove,
>         .id_table       = ti_adc_id,
>  };
>  module_spi_driver(ti_adc_driver);
> --
> 2.31.1
>



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux