On Tue, 11 May 2021 10:18:23 +0300
Alexandru Ardelean <aardelean@xxxxxxxxxxx> wrote:
> This change fixes a corner-case, where the returned voltage is actually
> zero. This is also what patch ab0afa65bbc7 ("staging: iio: adc: ad7192:
> fail probe on get_voltage") was trying to do.
>
> But as Jonathan pointed out, a zero-value would signal that the probe has
> succeeded, putting the driver is a semi-initialized state.
>
> Fixes: ab0afa65bbc7 ("staging: iio: adc: ad7192: fail probe on get_voltage")
> Cc: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
> Signed-off-by: Alexandru Ardelean <aardelean@xxxxxxxxxxx>
Given that voltage_uv == 1 would result in a situation no worse than
for voltage_uv == 0 perhaps we should just change the following condition to
if (voltage_uv >= 0) ?
Jonathan
> ---
> drivers/iio/adc/ad7192.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c
> index d3be67aa0522..79df54e0dc96 100644
> --- a/drivers/iio/adc/ad7192.c
> +++ b/drivers/iio/adc/ad7192.c
> @@ -950,6 +950,11 @@ static int ad7192_probe(struct spi_device *spi)
> }
>
> voltage_uv = regulator_get_voltage(st->avdd);
> + if (voltage_uv == 0) {
> + ret = -EINVAL;
> + dev_err(&spi->dev, "Zero value provided for AVdd supply\n");
> + goto error_disable_avdd;
> + }
>
> if (voltage_uv > 0) {
> st->int_vref_mv = voltage_uv / 1000;
