From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> This is an 'old' driver in IIO that has been in staging a while. First submitted in October 2010. I wanted to try and experiment and picked this driver to try it with. The cleanup etc here was all tested against some basic emulation added to QEMU rather than real hardware. Once I've cleaned that up a tiny bit I'll push it up to https://github.com/jic23/qemu Note that for now I'm not proposing to upstream this to QEMU but would be interested in hearing if people thing it is a good idea to do so. Whilst it's obviously hard to be absolutely sure that the emulation is correct, the fact that the original driver worked as expected and the cleaned up version still does is certainly encouraging. Note however, that there were a few more significant changes in here than basic cleanup. 1. Interrupts / events were handled in a rather esoteric fashion. (Always on, window modes represented as magnitudes). Note that for two channel devices there are separate lines. The original driver was not supporting this at all. They now look more like a standard IIO driver and reflect experience that we've gained over the years in dealing with devices where these aren't interrupt lines as such, but rather reporters of current status. 2. Timeouts were handled in a fashion that clearly wouldn't work. Note that this moving out of staging makes a few bits of ABI 'official' and so those are added to the main IIO ABI Docs. Thanks in advance to anyone who has time to take a look. Jonathan Jonathan Cameron (24): staging:iio:cdc:ad7150: use swapped reads for i2c rather than open coding. staging:iio:cdc:ad7150: Remove magnitude adaptive events staging:iio:cdc:ad7150: Refactor event parameter update staging:iio:cdc:ad7150: Timeout register covers both directions so both need updating staging:iio:cdc:ad7150: Drop platform data support staging:iio:cdc:ad7150: Handle variation in chan_spec across device and irq present or not staging:iio:cdc:ad7150: Simplify event handling by only using rising direction. staging:iio:cdc:ad7150: Drop noisy print in probe staging:iio:cdc:ad7150: Add sampling_frequency support iio:event: Add timeout event info type staging:iio:cdc:ad7150: Change timeout units to seconds and use core support staging:iio:cdc:ad7150: Rework interrupt handling. staging:iio:cdc:ad7150: More consistent register and field naming staging:iio:cdc:ad7150: Reorganize headers. staging:iio:cdc:ad7150: Tidy up local variable positioning. staging:iio:cdc:ad7150: Drop unnecessary block comments. staging:iio:cdc:ad7150: Shift the _raw readings by 4 bits. staging:iio:cdc:ad7150: Add scale and offset to info_mask_shared_by_type staging:iio:cdc:ad7150: Really basic regulator support. staging:iio:cdc:ad7150: Add of_match_table dt-bindings:iio:cdc:adi,ad7150 binding doc iio:Documentation:ABI Add missing elements as used by the adi,ad7150 staging:iio:cdc:ad7150: Add copyright notice given substantial changes. iio:cdc:ad7150: Move driver out of staging. Documentation/ABI/testing/sysfs-bus-iio | 33 + .../bindings/iio/cdc/adi,ad7150.yaml | 69 ++ drivers/iio/Kconfig | 1 + drivers/iio/Makefile | 1 + drivers/iio/cdc/Kconfig | 17 + drivers/iio/cdc/Makefile | 6 + drivers/iio/cdc/ad7150.c | 678 ++++++++++++++++++ drivers/iio/industrialio-event.c | 1 + drivers/staging/iio/cdc/Kconfig | 10 - drivers/staging/iio/cdc/Makefile | 3 +- drivers/staging/iio/cdc/ad7150.c | 655 ----------------- include/linux/iio/types.h | 1 + 12 files changed, 808 insertions(+), 667 deletions(-) create mode 100644 Documentation/devicetree/bindings/iio/cdc/adi,ad7150.yaml create mode 100644 drivers/iio/cdc/Kconfig create mode 100644 drivers/iio/cdc/Makefile create mode 100644 drivers/iio/cdc/ad7150.c delete mode 100644 drivers/staging/iio/cdc/ad7150.c -- 2.30.0
