On Thu, 21 Jan 2021 13:14:30 -0600
Dan Murphy <dmurphy@xxxxxx> wrote:
> Fix start and stop conversion commands. The proper command is not be
> sent.
>
> Fixes: ("e717f8c6dfec iio: adc: Add the TI ads124s08 ADC code")
That's not the right format for a fixes, tag. I fixed it whilst applying.
> Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
I've not applied this because there is another START_CONV in the
driver and I'm not sure that one is right either. It looks to be
a very similar code path to the one you are fixing here.
Thanks,
Jonathan
> ---
> drivers/iio/adc/ti-ads124s08.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iio/adc/ti-ads124s08.c b/drivers/iio/adc/ti-ads124s08.c
> index b4a128b19188..f05d4e0e1c9d 100644
> --- a/drivers/iio/adc/ti-ads124s08.c
> +++ b/drivers/iio/adc/ti-ads124s08.c
> @@ -237,7 +237,7 @@ static int ads124s_read_raw(struct iio_dev *indio_dev,
> goto out;
> }
>
> - ret = ads124s_write_cmd(indio_dev, ADS124S08_START_CONV);
> + ret = ads124s_write_cmd(indio_dev, ADS124S08_CMD_START);
> if (ret) {
> dev_err(&priv->spi->dev, "Start conversions failed\n");
> goto out;
> @@ -251,7 +251,7 @@ static int ads124s_read_raw(struct iio_dev *indio_dev,
>
> *val = ret;
>
> - ret = ads124s_write_cmd(indio_dev, ADS124S08_STOP_CONV);
> + ret = ads124s_write_cmd(indio_dev, ADS124S08_CMD_STOP);
> if (ret) {
> dev_err(&priv->spi->dev, "Stop conversions failed\n");
> goto out;
