Re: [PATCH v8] iio: hrtimer: Allow sub Hz granularity

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Jan 30, 2021 at 1:02 AM Gwendal Grignou <gwendal@xxxxxxxxxxxx> wrote:
>
> Allow setting frequency below 1Hz or sub 1Hz precision.
> Useful for slow sensors like ALS.
>
> Test frequency is set properly:
> modprobe iio-trig-hrtimer && \
> mkdir /sys/kernel/config/iio/triggers/hrtimer/t1 && \
> cd /sys/bus/iio/devices/triggerX ;
> for i in 1 .1 .01 .001 ; do
>   echo $i > sampling_frequency
>   cat sampling_frequency
> done

I think it's good enough, though one hint below.
After taking it into account
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>

> Signed-off-by: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
> ---
> Changes since v7:
> - Check for sign properly, only allow positive frequencies.
> - Return proper error code when input frequency is negative.
>
> Changes since v6:
> - Check for sign, only allow positive frequencies.
>
> Changes since v5:
> - Properly support do_div on 32bit architecture: quotient must be u64, dividend
>   u32.
> - Use PSEC_PER_SEC from
>   https://patchwork.kernel.org/project/linux-iio/patch/20210112153709.1074-1-andriy.shevchenko@xxxxxxxxxxxxxxx/
>
> Changes since v4:
> - Use do_div() properly.
>
> Changes since v3:
> - Fix rebasing issue.
>
> Changes since v2:
> - Add do_div to allow divide by a u64 on 32bit machines.
>
> Changes since v1:
> - Added documentation.
>
>  Documentation/iio/iio_configfs.rst     |  1 +
>  drivers/iio/trigger/iio-trig-hrtimer.c | 30 +++++++++++++++++---------
>  2 files changed, 21 insertions(+), 10 deletions(-)
>
> diff --git a/Documentation/iio/iio_configfs.rst b/Documentation/iio/iio_configfs.rst
> index ecbfdb3afef7e..807589ef2bea0 100644
> --- a/Documentation/iio/iio_configfs.rst
> +++ b/Documentation/iio/iio_configfs.rst
> @@ -99,3 +99,4 @@ Each trigger can have one or more attributes specific to the trigger type.
>
>  "hrtimer" trigger type doesn't have any configurable attribute from /config dir.
>  It does introduce the sampling_frequency attribute to trigger directory.
> +That attribute sets the polling frequency in Hz, with mHz precision.
> diff --git a/drivers/iio/trigger/iio-trig-hrtimer.c b/drivers/iio/trigger/iio-trig-hrtimer.c
> index f59bf8d585866..69c2943583b36 100644
> --- a/drivers/iio/trigger/iio-trig-hrtimer.c
> +++ b/drivers/iio/trigger/iio-trig-hrtimer.c
> @@ -22,7 +22,7 @@
>  struct iio_hrtimer_info {
>         struct iio_sw_trigger swt;
>         struct hrtimer timer;
> -       unsigned long sampling_frequency;
> +       int sampling_frequency[2];
>         ktime_t period;
>  };
>
> @@ -38,7 +38,9 @@ ssize_t iio_hrtimer_show_sampling_frequency(struct device *dev,
>         struct iio_trigger *trig = to_iio_trigger(dev);
>         struct iio_hrtimer_info *info = iio_trigger_get_drvdata(trig);
>
> -       return snprintf(buf, PAGE_SIZE, "%lu\n", info->sampling_frequency);
> +       return iio_format_value(buf, IIO_VAL_INT_PLUS_MICRO,
> +                       ARRAY_SIZE(info->sampling_frequency),
> +                       info->sampling_frequency);
>  }
>
>  static
> @@ -48,18 +50,26 @@ ssize_t iio_hrtimer_store_sampling_frequency(struct device *dev,
>  {
>         struct iio_trigger *trig = to_iio_trigger(dev);
>         struct iio_hrtimer_info *info = iio_trigger_get_drvdata(trig);
> -       unsigned long val;
> -       int ret;
> +       unsigned long long val;
> +       u64 period;
> +       int integer, fract, ret;
>
> -       ret = kstrtoul(buf, 10, &val);
> +       ret = iio_str_to_fixpoint(buf, 100, &integer, &fract);
>         if (ret)
>                 return ret;
> +       if (integer < 0 || fract < 0)
> +               return -ERANGE;
> +
> +       val = fract + 1000 * integer;

To avoid dependencies right now, define at the top of this file

#define PSEC_PER_SEC 1000000000000LL
#define NSEC_PER_PSEC 1000L

And use them here and there.

       val = fract + PSEC_PER_NSEC * integer;

> -       if (!val || val > NSEC_PER_SEC)
> +       if (!val || val > UINT_MAX)
>                 return -EINVAL;
>
> -       info->sampling_frequency = val;
> -       info->period = NSEC_PER_SEC / val;
> +       info->sampling_frequency[0] = integer;

> +       info->sampling_frequency[1] = fract * 1000;

Likewise.

> +       period = PSEC_PER_SEC;
> +       do_div(period, val);
> +       info->period = period;
>
>         return len;
>  }
> @@ -135,8 +145,8 @@ static struct iio_sw_trigger *iio_trig_hrtimer_probe(const char *name)
>         hrtimer_init(&trig_info->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
>         trig_info->timer.function = iio_hrtimer_trig_handler;
>
> -       trig_info->sampling_frequency = HRTIMER_DEFAULT_SAMPLING_FREQUENCY;
> -       trig_info->period = NSEC_PER_SEC / trig_info->sampling_frequency;
> +       trig_info->sampling_frequency[0] = HRTIMER_DEFAULT_SAMPLING_FREQUENCY;
> +       trig_info->period = NSEC_PER_SEC / trig_info->sampling_frequency[0];
>
>         ret = iio_trigger_register(trig_info->swt.trigger);
>         if (ret)
> --
> 2.30.0.365.g02bc693789-goog
>


-- 
With Best Regards,
Andy Shevchenko



[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux