On Wed 13 Jan 09:18 CST 2021, Jonathan Albrieux wrote:
> Checking at both msm8909-pm8916.dtsi and msm8916.dtsi from downstream
> it is indicated that "batt_id" channel has to be scaled with the default
> function:
>
> chan@31 {
> label = "batt_id";
> reg = <0x31>;
> qcom,decimation = <0>;
> qcom,pre-div-channel-scaling = <0>;
> qcom,calibration-type = "ratiometric";
> qcom,scale-function = <0>;
> qcom,hw-settle-time = <0xb>;
> qcom,fast-avg-setup = <0>;
> };
>
> Change LR_MUX2_BAT_ID scaling accordingly.
>
Acked-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Not entirely sure, but looking at the history I think this used to work
- but it's obvious that no one has read this channel for a while...
But I think below is a regression and should be mentioned:
Fixes: 7c271eea7b8a ("iio: adc: spmi-vadc: Changes to support different scaling")
> Signed-off-by: Jonathan Albrieux <jonathan.albrieux@xxxxxxxxx>
Jonathan Cameron, if you merge this through your tree I can take the dts
addition through the Qualcomm tree.
Regards,
Bjorn
> ---
> drivers/iio/adc/qcom-spmi-vadc.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/iio/adc/qcom-spmi-vadc.c b/drivers/iio/adc/qcom-spmi-vadc.c
> index b0388f8a69f4..7e7d408452ec 100644
> --- a/drivers/iio/adc/qcom-spmi-vadc.c
> +++ b/drivers/iio/adc/qcom-spmi-vadc.c
> @@ -598,7 +598,7 @@ static const struct vadc_channels vadc_chans[] = {
> VADC_CHAN_NO_SCALE(P_MUX16_1_3, 1)
>
> VADC_CHAN_NO_SCALE(LR_MUX1_BAT_THERM, 0)
> - VADC_CHAN_NO_SCALE(LR_MUX2_BAT_ID, 0)
> + VADC_CHAN_VOLT(LR_MUX2_BAT_ID, 0, SCALE_DEFAULT)
> VADC_CHAN_NO_SCALE(LR_MUX3_XO_THERM, 0)
> VADC_CHAN_NO_SCALE(LR_MUX4_AMUX_THM1, 0)
> VADC_CHAN_NO_SCALE(LR_MUX5_AMUX_THM2, 0)
> --
> 2.17.1
>
