The following changes since commit 749c1e1481e1d242ded9dd1bf210ddb7c0d22a4f: Merge tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next (2020-11-24 08:30:08 +0100) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.11b for you to fetch changes up to 17d88536687df78673f395d5b7d5e7381c20b96c: iio: adc: rockchip_saradc: fix missing clk_disable_unprepare() on error in rockchip_saradc_resume (2020-12-01 13:02:14 +0000) ---------------------------------------------------------------- 2nd set of IIO device support, features, cleanups and yaml conversions for 5.11 Includes low priority/late breaking/long standing bug fixes. Note this includes the last few patches that were listed in the description for the previous pull request but weren't actually in the PULL. New devices support * bosch,bmc150-accel - Support for BMA222, including adding binding doc that was previously missing. * st,lsm6dsx - Support LSM6DSOP accelerometer + gyroscope sensor. yaml-conversions by manufacturer * core - adc - iio-binding (drop as now in dt-schema) - temperature (drop as not clear it is generic) * generic (no specific manufacturer) - dpot-dac - current-sense-amplifier - current-sense-shunt - envelope-detector - voltage-divider * adi,ad5592r adi,ad7124 adi,ad7292 adi,adf4350 * atmel,sama9260-adc * bosch,bma180 bosch,bmg180 * brcm,iproc-static-adc * capella,cm3605 * fsl,mma8452 * kionix,kxcjk1013 * maxim,max1027 (from trivial) * mediatek,mt2701-auxdac * microchip,mcp4531 (from trivial) * qcom,pm8018-adc qcom,spi-iadc * st,st-sensors * ti,ads124s08 ti,afe4403 ti,afe4404 ti,lmp91000 ti,palmas-gpadc Features * bosch,bmc150 - Handle unusual ACPI binding where two devices are provided in a single ACPI device (BOSC0200). - ACPI based mount matrix handling * st,hts221 - regulator control * st,lsm6dsx - regulator control Cleanup + minor fixes * core - Reduce duplication in iio_format_avail_{list,range}() and iio_format_list() - Fix an issue in the demux update code that could lead to misaligned data. Possible no existing driver hits this. Been there a very long time with no bug reports. - Improve iio_map_array_register() error handling. - Avoid polling driver again if try_reenable() callback returns non 0. Only users of this were bugs so also drop the return value. * core/cb_buffer - Return an error if no callback provided (include adding a dummy for one unusual case where no callback is valid). * trigger/hrtimer-trig, sysfs-trig - Fix an issue seen with PREEMPT_RT by marking irq_work as expiring in hard interrupt context. * adi,ad_sigma_delta library - Avoid putting SPI transfer buffers on stack for DMA safety reasons * adi,ad5272 - Fix discrepancy in polarity of reset line between binding documentation (which was right) and driver. * adi,ad7298 - Use devm for all of probe * atmel,at91_adc - Drop at91_adc_ids as only support DT probe - Simplify resolution selection and bindings - Drop binding for triggers and move into driver based on compatible. - Merge at91_adc_probe_dt() into main at91_adc_probe() * bosch,bmc150 - Drop unused structure member. * bosch,bmi160 - Fix overly long buffer due to wrong channel count. - Fix potential buffer alignment into iio_push_to_buffers_with_timestamp() * fsl,mag3110 - Fix potential buffer alignment into iio_push_to_buffers_with_timestamp() * fsl,mpl3115 - Fix potential buffer alignment into iio_push_to_buffers_with_timestamp() * invn,mpu3050 - Use 64 bit local variable and FIELD_GET to simplify code that extracts values from OTP. * qcom,spmi-vadc - Drop wrong use of io-channel-ranges in binding doc. * rockchip,saradc - Fix a missing clk_disable_unprepare() in an error path. * rohm,rpr0521 - Fix potential buffer alignment into iio_push_to_buffers_with_timestamp() * samsung,exynos-adc - Drop wrong use of io-channel-ranges in binding doc. * st,lsm6dsx - Reduce duplication in the chip model specific tables. - Fix an issue with missed edge-interrupts that can occur when using the FIFO. * st,uvis21 - Fix potential buffer alignment into iio_push_to_buffers_with_timestamp() * ti,adc084s021 - Tidy up endian types to clear a warning. * ti,ads124s08 - Fix too long a buffer. - Fix potential buffer alignment into iio_push_to_buffers_with_timestamp() Counter * microchip,tcb-counter - Add Kamel Bouhara to MAINTAINERS - Fix CMR value check ---------------------------------------------------------------- Alexandre Belloni (6): iio: adc: at91_adc: remove at91_adc_ids iio: adc: at91_adc: rework resolution selection dt-bindings:iio:adc:remove atmel, adc-res and atmel, adc-res-names iio: adc: at91_adc: rework trigger definition dt-bindings:iio:adc:remove triggers iio: adc: at91_adc: merge at91_adc_probe_dt back in at91_adc_probe Alexandru Ardelean (2): iio: adc: ad7298: convert probe to device-managed functions iio: adc: ad7298: check regulator for null in ad7298_get_ref_voltage() Hans de Goede (2): iio: accel: bmc150: Removed unused bmc150_accel_dat irq member iio: accel: bmc150: Get mount-matrix from ACPI Jeremy Cline (1): iio: accel: bmc150: Check for a second ACPI device for BOSC0200 Jonathan Cameron (44): dt-bindings:iio:adc:brcm,iproc-static-adc: txt to yaml conversion dt-bindings:iio:adc:mediatek,mt2701-auxadc: rename and yaml conversion. dt-bindings:iio:adc:ti,palmas-gpadc: txt to yaml format conversion. dt-bindings:iio:adc:qcom,pm8018-adc: yaml conversion and rename. dt-bindings:iio:adc:qcom,spmi-iadc: txt to yaml format conversion. dt-binding:iio:adc:ti,ads124s08: txt to yaml format conversion. dt-bindings:iio:dac:ad5592r: txt to yaml format conversion. dt-bindings:iio:accel:bosch,bma180: txt to yaml format conversion. dt-bindings:iio:accel:kionix,kxcjk1013: txt to yaml format conversion. dt-bindings:iio:accel:fsl,mma8452: txt to yaml conversion. dt-bindings:iio:gyro:bosch,bmg180: txt to yaml format conversion. dt-bindings:iio:st,st-sensors: txt to yaml conversion. dt-bindings:iio:frequency:adi,adf4350: txt to yaml format conversion. dt-bindings:iio:temperature: Drop generic binding file. dt-bindings:iio:qcom-spmi-vadc drop incorrect io-channel-ranges from example dt-bindings:iio:samsung, exynos-adc: drop missuse of io-channel-ranges dt-bindings:iio:health:ti,afe4403: txt to yaml binding dt-bindings:iio:health:ti,afe4404: txt to yaml conversion dt-bindings:iio:adc: convert adc.txt to yaml dt-bindings:iio:adc:adi,ad7124: Use the new adc.yaml channel binding dt-bindings:iio:adc:adi,ad7292: Use new adc.yaml binding for channels. dt-bindings:iio:iio-binding.txt Drop file as content now in dt-schema dt-bindings:iio:dac:dpot-dac: yaml conversion. dt-bindings:iio:potentiometer: give microchip,mcp4531 its own binding dt-bindings:iio:adc:envelope-detector: txt to yaml conversion. dt-bindings:iio:afe:current-sense-amplifier: txt to yaml conversion. dt-bindings:iio:afe:current-sense-shunt: txt to yaml conversion. dt-bindings:iio:adc:maxim,max1027: Pull out to separate binding doc. dt-bindings:iio:afe:voltage-divider: txt to yaml conversion dt-bindings:iio:light:capella,cm3605: txt to yaml conversion. dt-bindings:iio:potentiostat:ti,lmp91000: txt to yaml conversion. dt-bindings:iio:adc:atmel, sama9260-adc: conversion to yaml from at91_adc.txt iio: Fix: Do not poll the driver again if try_reenable() callback returns non 0. iio:trigger: rename try_reenable() to reenable() plus return void iio:adc:ti-adc084s021 Tidy up endian types iio:light:rpr0521: Fix timestamp alignment and prevent data leak. iio:light:st_uvis25: Fix timestamp alignment and prevent data leak. iio:magnetometer:mag3110: Fix alignment and data leak issues. iio:imu:bmi160: Fix too large a buffer. iio:imu:bmi160: Fix alignment and data leak issues iio:pressure:mpl3115: Force alignment of buffer iio:adc:ti-ads124s08: Fix buffer being too long. iio:adc:ti-ads124s08: Fix alignment and data leak issues. iio:gyro:mpu3050 Treat otp value as a __le64 and use FIELD_GET() to break up Lars-Peter Clausen (5): iio: ad_sigma_delta: Don't put SPI transfer buffer on the stack iio: core: Consolidate iio_format_avail_{list,range}() iio: core: Simplify iio_format_list() iio: hrtimer-trigger: Mark hrtimer to expire in hard interrupt context iio: sysfs-trigger: Mark irq_work to expire in hardirq context Lino Sanfilippo (2): iio:core: Introduce unlocked version of iio_map_array_unregister() io:core: In iio_map_array_register() cleanup in case of error Linus Walleij (3): iio: accel: bmc150-accel: Add DT bindings iio: accel: bmc150-accel: Add support for BMA222 iio: accel: bmc150-accel: Add rudimentary regulator support Lorenzo Bianconi (8): iio: imu: st_lsm6dsx: add vdd-vddio voltage regulator dt-bindings: iio: imu: st_lsm6dsx: introduce vdd-vddio regulators bindings iio: humidity: hts221: add vdd voltage regulator dt-bindings: iio: humidity: hts221: introduce vdd regulator bindings iio: imu: st_lsmdsx: compact st_lsm6dsx_sensor_settings table iio: imu: st_lsm6dsx: add support to LSM6DSOP dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsop device bindings iio: imu: st_lsm6dsx: fix edge-trigger interrupts Nuno Sá (2): iio: buffer: Return error if no callback is given iio: buffer: Fix demux update Olivier Moysan (1): ASoC: stm32: dfsdm: add stm32_adfsdm_dummy_cb() callback Phil Reid (1): iio: potentiometer: ad5272: Correct polarity of reset Qinglang Miao (1): iio: adc: rockchip_saradc: fix missing clk_disable_unprepare() on error in rockchip_saradc_resume William Breathitt Gray (2): MAINTAINERS: Add Kamel Bouhara as TCB counter driver maintainer counter: microchip-tcb-capture: Fix CMR value check .../devicetree/bindings/iio/accel/bma180.txt | 35 -- .../bindings/iio/accel/bosch,bma180.yaml | 62 +++ .../bindings/iio/accel/bosch,bma255.yaml | 73 +++ .../devicetree/bindings/iio/accel/fsl,mma8452.yaml | 65 +++ .../bindings/iio/accel/kionix,kxcjk1013.txt | 24 - .../bindings/iio/accel/kionix,kxcjk1013.yaml | 46 ++ .../devicetree/bindings/iio/accel/mma8452.txt | 35 -- Documentation/devicetree/bindings/iio/adc/adc.txt | 29 -- Documentation/devicetree/bindings/iio/adc/adc.yaml | 42 ++ .../devicetree/bindings/iio/adc/adi,ad7124.yaml | 14 +- .../devicetree/bindings/iio/adc/adi,ad7292.yaml | 8 +- .../devicetree/bindings/iio/adc/at91_adc.txt | 83 ---- .../bindings/iio/adc/atmel,sama9260-adc.yaml | 121 +++++ .../bindings/iio/adc/brcm,iproc-static-adc.txt | 40 -- .../bindings/iio/adc/brcm,iproc-static-adc.yaml | 70 +++ .../bindings/iio/adc/envelope-detector.txt | 54 --- .../bindings/iio/adc/envelope-detector.yaml | 86 ++++ .../devicetree/bindings/iio/adc/maxim,max1027.yaml | 65 +++ .../bindings/iio/adc/mediatek,mt2701-auxadc.yaml | 77 +++ .../devicetree/bindings/iio/adc/mt6577_auxadc.txt | 34 -- .../devicetree/bindings/iio/adc/palmas-gpadc.txt | 48 -- .../bindings/iio/adc/qcom,pm8018-adc.yaml | 166 +++++++ .../bindings/iio/adc/qcom,pm8xxx-xoadc.txt | 157 ------- .../devicetree/bindings/iio/adc/qcom,spmi-iadc.txt | 46 -- .../bindings/iio/adc/qcom,spmi-iadc.yaml | 60 +++ .../bindings/iio/adc/qcom,spmi-vadc.yaml | 3 - .../bindings/iio/adc/samsung,exynos-adc.yaml | 4 - .../devicetree/bindings/iio/adc/ti,ads124s08.yaml | 52 ++ .../bindings/iio/adc/ti,palmas-gpadc.yaml | 87 ++++ .../devicetree/bindings/iio/adc/ti-ads124s08.txt | 25 - .../bindings/iio/afe/current-sense-amplifier.txt | 26 - .../bindings/iio/afe/current-sense-amplifier.yaml | 54 +++ .../bindings/iio/afe/current-sense-shunt.txt | 41 -- .../bindings/iio/afe/current-sense-shunt.yaml | 64 +++ .../bindings/iio/afe/voltage-divider.txt | 53 --- .../bindings/iio/afe/voltage-divider.yaml | 86 ++++ .../devicetree/bindings/iio/dac/ad5592r.txt | 155 ------ .../devicetree/bindings/iio/dac/adi,ad5592r.yaml | 204 ++++++++ .../devicetree/bindings/iio/dac/dpot-dac.txt | 41 -- .../devicetree/bindings/iio/dac/dpot-dac.yaml | 64 +++ .../devicetree/bindings/iio/frequency/adf4350.txt | 86 ---- .../bindings/iio/frequency/adi,adf4350.yaml | 190 ++++++++ .../devicetree/bindings/iio/gyroscope/bmg160.txt | 20 - .../bindings/iio/gyroscope/bosch,bmg160.yaml | 46 ++ .../devicetree/bindings/iio/health/afe4403.txt | 33 -- .../devicetree/bindings/iio/health/afe4404.txt | 29 -- .../devicetree/bindings/iio/health/ti,afe4403.yaml | 54 +++ .../devicetree/bindings/iio/health/ti,afe4404.yaml | 51 ++ .../bindings/iio/humidity/st,hts221.yaml | 2 + .../devicetree/bindings/iio/iio-bindings.txt | 102 ---- .../devicetree/bindings/iio/imu/st,lsm6dsx.yaml | 7 + .../bindings/iio/light/capella,cm3605.yaml | 79 ++++ .../devicetree/bindings/iio/light/cm3605.txt | 41 -- .../iio/potentiometer/microchip,mcp4531.yaml | 116 +++++ .../bindings/iio/potentiostat/lmp91000.txt | 33 -- .../bindings/iio/potentiostat/ti,lmp91000.yaml | 68 +++ .../devicetree/bindings/iio/st,st-sensors.yaml | 123 +++++ .../devicetree/bindings/iio/st-sensors.txt | 82 ---- .../iio/temperature/temperature-bindings.txt | 7 - .../devicetree/bindings/trivial-devices.yaml | 140 ------ MAINTAINERS | 7 + drivers/counter/microchip-tcb-capture.c | 16 +- drivers/iio/accel/bma180.c | 9 +- drivers/iio/accel/bmc150-accel-core.c | 194 +++++++- drivers/iio/accel/bmc150-accel-i2c.c | 45 +- drivers/iio/accel/bmc150-accel-spi.c | 2 + drivers/iio/accel/bmc150-accel.h | 3 + drivers/iio/accel/kxcjk-1013.c | 10 +- drivers/iio/accel/mxc4005.c | 16 +- drivers/iio/adc/ad7298.c | 48 +- drivers/iio/adc/ad_sigma_delta.c | 18 +- drivers/iio/adc/at91-sama5d2_adc.c | 8 +- drivers/iio/adc/at91_adc.c | 294 +++++------- drivers/iio/adc/rockchip_saradc.c | 2 +- drivers/iio/adc/ti-adc084s021.c | 10 +- drivers/iio/adc/ti-ads124s08.c | 13 +- drivers/iio/buffer/industrialio-buffer-cb.c | 5 + drivers/iio/gyro/adxrs290.c | 6 +- drivers/iio/gyro/bmg160_core.c | 12 +- drivers/iio/gyro/mpu3050-core.c | 28 +- drivers/iio/humidity/hts221.h | 2 + drivers/iio/humidity/hts221_core.c | 37 ++ drivers/iio/imu/bmi160/bmi160.h | 7 + drivers/iio/imu/bmi160/bmi160_core.c | 6 +- drivers/iio/imu/kmx61.c | 10 +- drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 8 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 2 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 521 ++++----------------- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 + drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 + drivers/iio/industrialio-buffer.c | 6 +- drivers/iio/industrialio-core.c | 94 ++-- drivers/iio/industrialio-trigger.c | 6 +- drivers/iio/inkern.c | 29 +- drivers/iio/light/rpr0521.c | 17 +- drivers/iio/light/st_uvis25.h | 5 + drivers/iio/light/st_uvis25_core.c | 8 +- drivers/iio/magnetometer/bmc150_magn.c | 10 +- drivers/iio/magnetometer/mag3110.c | 13 +- drivers/iio/potentiometer/ad5272.c | 4 +- drivers/iio/pressure/mpl3115.c | 9 +- drivers/iio/trigger/iio-trig-hrtimer.c | 4 +- drivers/iio/trigger/iio-trig-sysfs.c | 1 + include/linux/iio/adc/ad_sigma_delta.h | 6 +- include/linux/iio/trigger.h | 4 +- sound/soc/stm/stm32_adfsdm.c | 12 +- 107 files changed, 3014 insertions(+), 2373 deletions(-) delete mode 100644 Documentation/devicetree/bindings/iio/accel/bma180.txt create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bma180.yaml create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml create mode 100644 Documentation/devicetree/bindings/iio/accel/fsl,mma8452.yaml delete mode 100644 Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.txt create mode 100644 Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml delete mode 100644 Documentation/devicetree/bindings/iio/accel/mma8452.txt delete mode 100644 Documentation/devicetree/bindings/iio/adc/adc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/adc.yaml delete mode 100644 Documentation/devicetree/bindings/iio/adc/at91_adc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/atmel,sama9260-adc.yaml delete mode 100644 Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.yaml delete mode 100644 Documentation/devicetree/bindings/iio/adc/envelope-detector.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/envelope-detector.yaml create mode 100644 Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml create mode 100644 Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml delete mode 100644 Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt delete mode 100644 Documentation/devicetree/bindings/iio/adc/palmas-gpadc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml delete mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,pm8xxx-xoadc.txt delete mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml delete mode 100644 Documentation/devicetree/bindings/iio/adc/ti-ads124s08.txt delete mode 100644 Documentation/devicetree/bindings/iio/afe/current-sense-amplifier.txt create mode 100644 Documentation/devicetree/bindings/iio/afe/current-sense-amplifier.yaml delete mode 100644 Documentation/devicetree/bindings/iio/afe/current-sense-shunt.txt create mode 100644 Documentation/devicetree/bindings/iio/afe/current-sense-shunt.yaml delete mode 100644 Documentation/devicetree/bindings/iio/afe/voltage-divider.txt create mode 100644 Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml delete mode 100644 Documentation/devicetree/bindings/iio/dac/ad5592r.txt create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ad5592r.yaml delete mode 100644 Documentation/devicetree/bindings/iio/dac/dpot-dac.txt create mode 100644 Documentation/devicetree/bindings/iio/dac/dpot-dac.yaml delete mode 100644 Documentation/devicetree/bindings/iio/frequency/adf4350.txt create mode 100644 Documentation/devicetree/bindings/iio/frequency/adi,adf4350.yaml delete mode 100644 Documentation/devicetree/bindings/iio/gyroscope/bmg160.txt create mode 100644 Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml delete mode 100644 Documentation/devicetree/bindings/iio/health/afe4403.txt delete mode 100644 Documentation/devicetree/bindings/iio/health/afe4404.txt create mode 100644 Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml create mode 100644 Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml delete mode 100644 Documentation/devicetree/bindings/iio/iio-bindings.txt create mode 100644 Documentation/devicetree/bindings/iio/light/capella,cm3605.yaml delete mode 100644 Documentation/devicetree/bindings/iio/light/cm3605.txt create mode 100644 Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4531.yaml delete mode 100644 Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt create mode 100644 Documentation/devicetree/bindings/iio/potentiostat/ti,lmp91000.yaml create mode 100644 Documentation/devicetree/bindings/iio/st,st-sensors.yaml delete mode 100644 Documentation/devicetree/bindings/iio/st-sensors.txt delete mode 100644 Documentation/devicetree/bindings/iio/temperature/temperature-bindings.txt
