Re: [PATCH 5/9] iio: adc: at91_adc: merge at91_adc_probe_dt back in at91_adc_probe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 14 Nov 2020 17:08:04 +0000
Jonathan Cameron <jic23@xxxxxxxxxx> wrote:

> On Fri, 13 Nov 2020 22:26:46 +0100
> Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx> wrote:
> 
> > at91_adc_probe_dt is now small enough to be merged back in at91_adc_probe.
> > 
> > Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>  
> Minor largely unrelated suggestion inline as we are touching this code.
> 
Ignore that, you do it in the next patch which is better anyway :)

Jonathan

> Thanks,
> 
> Jonathan
> 
> > ---
> >  drivers/iio/adc/at91_adc.c | 118 +++++++++++++++----------------------
> >  1 file changed, 49 insertions(+), 69 deletions(-)
> > 
> > diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
> > index 83539422b704..9f05eb722f5e 100644
> > --- a/drivers/iio/adc/at91_adc.c
> > +++ b/drivers/iio/adc/at91_adc.c
> > @@ -833,70 +833,6 @@ static int at91_adc_probe_dt_ts(struct device_node *node,
> >  	}
> >  }
> >  
> > -static int at91_adc_probe_dt(struct iio_dev *idev,
> > -			     struct platform_device *pdev)
> > -{
> > -	struct at91_adc_state *st = iio_priv(idev);
> > -	struct device_node *node = pdev->dev.of_node;
> > -	int ret;
> > -	u32 prop;
> > -	char *s;
> > -
> > -	st->caps = (struct at91_adc_caps *)
> > -		of_match_device(at91_adc_dt_ids, &pdev->dev)->data;
> > -
> > -	st->use_external = of_property_read_bool(node, "atmel,adc-use-external-triggers");
> > -
> > -	if (of_property_read_u32(node, "atmel,adc-channels-used", &prop)) {
> > -		dev_err(&idev->dev, "Missing adc-channels-used property in the DT.\n");
> > -		ret = -EINVAL;
> > -		goto error_ret;
> > -	}
> > -	st->channels_mask = prop;
> > -
> > -	st->sleep_mode = of_property_read_bool(node, "atmel,adc-sleep-mode");
> > -
> > -	if (of_property_read_u32(node, "atmel,adc-startup-time", &prop)) {
> > -		dev_err(&idev->dev, "Missing adc-startup-time property in the DT.\n");
> > -		ret = -EINVAL;
> > -		goto error_ret;
> > -	}
> > -	st->startup_time = prop;
> > -
> > -	prop = 0;
> > -	of_property_read_u32(node, "atmel,adc-sample-hold-time", &prop);
> > -	st->sample_hold_time = prop;
> > -
> > -	if (of_property_read_u32(node, "atmel,adc-vref", &prop)) {
> > -		dev_err(&idev->dev, "Missing adc-vref property in the DT.\n");
> > -		ret = -EINVAL;
> > -		goto error_ret;
> > -	}
> > -	st->vref_mv = prop;
> > -
> > -	st->res = st->caps->high_res_bits;
> > -	if (st->caps->low_res_bits &&
> > -	    !of_property_read_string(node, "atmel,adc-use-res", (const char **)&s)
> > -	    && !strcmp(s, "lowres"))
> > -		st->res = st->caps->low_res_bits;
> > -
> > -	dev_info(&idev->dev, "Resolution used: %u bits\n", st->res);
> > -
> > -	st->registers = &st->caps->registers;
> > -	st->num_channels = st->caps->num_channels;
> > -
> > -	/* Check if touchscreen is supported. */
> > -	if (st->caps->has_ts)
> > -		return at91_adc_probe_dt_ts(node, st, &idev->dev);
> > -	else
> > -		dev_info(&idev->dev, "not support touchscreen in the adc compatible string.\n");
> > -
> > -	return 0;
> > -
> > -error_ret:
> > -	return ret;
> > -}
> > -
> >  static const struct iio_info at91_adc_info = {
> >  	.read_raw = &at91_adc_read_raw,
> >  };
> > @@ -1062,10 +998,12 @@ static void at91_ts_unregister(struct at91_adc_state *st)
> >  static int at91_adc_probe(struct platform_device *pdev)
> >  {
> >  	unsigned int prsc, mstrclk, ticks, adc_clk, adc_clk_khz, shtim;
> > +	struct device_node *node = pdev->dev.of_node;
> >  	int ret;
> >  	struct iio_dev *idev;
> >  	struct at91_adc_state *st;
> > -	u32 reg;
> > +	u32 reg, prop;
> > +	char *s;
> >  
> >  	idev = devm_iio_device_alloc(&pdev->dev, sizeof(struct at91_adc_state));
> >  	if (!idev)
> > @@ -1073,9 +1011,52 @@ static int at91_adc_probe(struct platform_device *pdev)
> >  
> >  	st = iio_priv(idev);
> >  
> > -	ret = at91_adc_probe_dt(idev, pdev);
> > -	if (ret)
> > -		return ret;
> > +	st->caps = (struct at91_adc_caps *)
> > +		of_match_device(at91_adc_dt_ids, &pdev->dev)->data;  
> 
> of_device_get match_data  - obviously an unrelated change but trivial enough
> I'd just slip it in this patch (unless you have it a later one!)
> 
> That returns a void * so no need for the cast.
> 
> > +
> > +	st->use_external = of_property_read_bool(node, "atmel,adc-use-external-triggers");
> > +
> > +	if (of_property_read_u32(node, "atmel,adc-channels-used", &prop)) {
> > +		dev_err(&idev->dev, "Missing adc-channels-used property in the DT.\n");
> > +		return -EINVAL;
> > +	}
> > +	st->channels_mask = prop;
> > +
> > +	st->sleep_mode = of_property_read_bool(node, "atmel,adc-sleep-mode");
> > +
> > +	if (of_property_read_u32(node, "atmel,adc-startup-time", &prop)) {
> > +		dev_err(&idev->dev, "Missing adc-startup-time property in the DT.\n");
> > +		return -EINVAL;
> > +	}
> > +	st->startup_time = prop;
> > +
> > +	prop = 0;
> > +	of_property_read_u32(node, "atmel,adc-sample-hold-time", &prop);
> > +	st->sample_hold_time = prop;
> > +
> > +	if (of_property_read_u32(node, "atmel,adc-vref", &prop)) {
> > +		dev_err(&idev->dev, "Missing adc-vref property in the DT.\n");
> > +		return -EINVAL;
> > +	}
> > +	st->vref_mv = prop;
> > +
> > +	st->res = st->caps->high_res_bits;
> > +	if (st->caps->low_res_bits &&
> > +	    !of_property_read_string(node, "atmel,adc-use-res", (const char **)&s)
> > +	    && !strcmp(s, "lowres"))
> > +		st->res = st->caps->low_res_bits;
> > +
> > +	dev_info(&idev->dev, "Resolution used: %u bits\n", st->res);
> > +
> > +	st->registers = &st->caps->registers;
> > +	st->num_channels = st->caps->num_channels;
> > +
> > +	/* Check if touchscreen is supported. */
> > +	if (st->caps->has_ts) {
> > +		ret = at91_adc_probe_dt_ts(node, st, &idev->dev);
> > +		if (ret)
> > +			return ret;
> > +	}
> >  
> >  	platform_set_drvdata(pdev, idev);
> >  
> > @@ -1091,7 +1072,6 @@ static int at91_adc_probe(struct platform_device *pdev)
> >  	if (IS_ERR(st->reg_base))
> >  		return PTR_ERR(st->reg_base);
> >  
> > -  
> Stray change that shouldn't be in this patch ideally but not that important.
> 
> >  	/*
> >  	 * Disable all IRQs before setting up the handler
> >  	 */  
> 




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux