On Sat, Oct 31, 2020 at 06:48:50PM +0000, Jonathan Cameron wrote: > From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> > > Simple binding so mostly straight forward to convert. > Original binding was unclear on how many interrupts there are. > The device has two such lines, whilst I believe the driver currently > only uses one at a time. The binding should allow both to be specified. > > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> > Cc: Martin Kepplinger <martin.kepplinger@xxxxxxxxxxxxxxxxxxxxx> > --- > .../bindings/iio/accel/fsl,mma8452.yaml | 62 +++++++++++++++++++ > .../devicetree/bindings/iio/accel/mma8452.txt | 35 ----------- > 2 files changed, 62 insertions(+), 35 deletions(-) > > diff --git a/Documentation/devicetree/bindings/iio/accel/fsl,mma8452.yaml b/Documentation/devicetree/bindings/iio/accel/fsl,mma8452.yaml > new file mode 100644 > index 000000000000..3b8e5ebdf90c > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/accel/fsl,mma8452.yaml > @@ -0,0 +1,62 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/accel/fsl,mma8452.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: > + Freescale MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC or FXLS8471Q > + triaxial accelerometer > + > +maintainers: > + - Martin Kepplinger <martin.kepplinger@xxxxxxxxxxxxxxxxxxxxx> > + > +properties: > + compatible: > + enum: > + - fsl,mma8451 > + - fsl,mma8452 > + - fsl,mma8453 > + - fsl,mma8652 > + - fsl,mma8653 > + - fsl,fxls8471 > + > + reg: > + maxItems: 1 > + > + interrupts: > + description: > + 2 highly configurable interrupt lines exist. > + minItems: 1 > + maxItems: 2 > + > + interrupt-names: > + description: Specify which interrupt line is in use. > + enum: > + - INT1 > + - INT2 This will default to only 1 item allowed. You need minItems/maxItems. > + > + vdd-supply: true > + vddio-supply: true > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + accel@1d { > + compatible = "fsl,mma8453"; > + reg = <0x1d>; > + interrupt-parent = <&gpio1>; > + interrupts = <5 0>; > + interrupt-names = "INT2"; > + }; > + }; > +... > diff --git a/Documentation/devicetree/bindings/iio/accel/mma8452.txt b/Documentation/devicetree/bindings/iio/accel/mma8452.txt > deleted file mode 100644 > index e132394375a1..000000000000 > --- a/Documentation/devicetree/bindings/iio/accel/mma8452.txt > +++ /dev/null > @@ -1,35 +0,0 @@ > -Freescale MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC or FXLS8471Q > -triaxial accelerometer > - > -Required properties: > - > - - compatible: should contain one of > - * "fsl,mma8451" > - * "fsl,mma8452" > - * "fsl,mma8453" > - * "fsl,mma8652" > - * "fsl,mma8653" > - * "fsl,fxls8471" > - > - - reg: the I2C address of the chip > - > -Optional properties: > - > - - interrupts: interrupt mapping for GPIO IRQ > - > - - interrupt-names: should contain "INT1" and/or "INT2", the accelerometer's > - interrupt line in use. > - > - - vdd-supply: phandle to the regulator that provides vdd power to the accelerometer. > - > - - vddio-supply: phandle to the regulator that provides vddio power to the accelerometer. > - > -Example: > - > - mma8453fc@1d { > - compatible = "fsl,mma8453"; > - reg = <0x1d>; > - interrupt-parent = <&gpio1>; > - interrupts = <5 0>; > - interrupt-names = "INT2"; > - }; > -- > 2.28.0 >
