From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Straight forward conversion. Not heard from Ivan in a while so if the
email bounces, I'll change the maintainer to myself for this binding unless
anyone else comes forwards.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Cc: Ivan T. Ivanov <iivanov@xxxxxxxxxx>
---
.../bindings/iio/adc/qcom,spmi-iadc.txt | 46 --------------
.../bindings/iio/adc/qcom,spmi-iadc.yaml | 62 +++++++++++++++++++
2 files changed, 62 insertions(+), 46 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt
deleted file mode 100644
index 4e36d6e2f7b6..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Qualcomm's SPMI PMIC current ADC
-
-QPNP PMIC current ADC (IADC) provides interface to clients to read current.
-A 16 bit ADC is used for current measurements. IADC can measure the current
-through an external resistor (channel 1) or internal (built-in) resistor
-(channel 0). When using an external resistor it is to be described by
-qcom,external-resistor-micro-ohms property.
-
-IADC node:
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: Should contain "qcom,spmi-iadc".
-
-- reg:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: IADC base address and length in the SPMI PMIC register map
-
-- interrupts:
- Usage: optional
- Value type: <prop-encoded-array>
- Definition: End of ADC conversion.
-
-- qcom,external-resistor-micro-ohms:
- Usage: optional
- Value type: <u32>
- Definition: Sense resister value in micro Ohm.
- If not defined value of 10000 micro Ohms will be used.
-
-Example:
- /* IADC node */
- pmic_iadc: iadc@3600 {
- compatible = "qcom,spmi-iadc";
- reg = <0x3600 0x100>;
- interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
- qcom,external-resistor-micro-ohms = <10000>;
- #io-channel-cells = <1>;
- };
-
- /* IIO client node */
- bat {
- io-channels = <&pmic_iadc 0>;
- io-channel-names = "iadc";
- };
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
new file mode 100644
index 000000000000..359e1ede0ae2
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/qcom,spmi-iadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's SPMI PMIC current ADC
+
+maintainers:
+ - Ivan T. Ivanov <iivanov@xxxxxxxxxx>
+
+description: |
+ QPNP PMIC current ADC (IADC) provides interface to clients to read current.
+ A 16 bit ADC is used for current measurements. IADC can measure the current
+ through an external resistor (channel 1) or internal (built-in) resistor
+ (channel 0). When using an external resistor it is to be described by
+ qcom,external-resistor-micro-ohms property.
+
+properties:
+ compatible:
+ const: qcom,spmi-iadc
+
+ reg:
+ description: IADC base address and length in the SPMI PMIC register map
+ maxItems: 1
+
+ qcom,external-resistor-micro-ohms:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Sensor resistor value. If not defined value of 10000 micro Ohms
+ will be used.
+
+ interrupts:
+ maxItems: 1
+ description:
+ End of conversion interrupt.
+
+ "#io-channel-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spmi_bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pmic_iadc: adc@3600 {
+ compatible = "qcom,spmi-iadc";
+ reg = <0x3600 0x100>;
+ interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
+ qcom,external-resistor-micro-ohms = <10000>;
+ #io-channel-cells = <1>;
+ };
+ };
+...
+
--
2.28.0
