From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx> In order to simplify resource management and error paths in probe(), add a devm action that calls clk_disable_unprepare() at driver detach. Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx> --- drivers/iio/adc/xilinx-xadc-core.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c index b516280ccbd4..e0da6258092c 100644 --- a/drivers/iio/adc/xilinx-xadc-core.c +++ b/drivers/iio/adc/xilinx-xadc-core.c @@ -1185,6 +1185,13 @@ static int xadc_parse_dt(struct iio_dev *indio_dev, struct device_node *np, return 0; } +static void xadc_clk_disable_unprepare(void *data) +{ + struct clk *clk = data; + + clk_disable_unprepare(clk); +} + static int xadc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -1262,6 +1269,11 @@ static int xadc_probe(struct platform_device *pdev) if (ret) goto err_free_samplerate_trigger; + ret = devm_add_action_or_reset(dev, + xadc_clk_disable_unprepare, xadc->clk); + if (ret) + goto err_free_samplerate_trigger; + /* * Make sure not to exceed the maximum samplerate since otherwise the * resulting interrupt storm will soft-lock the system. @@ -1280,7 +1292,7 @@ static int xadc_probe(struct platform_device *pdev) ret = request_irq(xadc->irq, xadc->ops->interrupt_handler, 0, dev_name(dev), indio_dev); if (ret) - goto err_clk_disable_unprepare; + goto err_free_samplerate_trigger; ret = xadc->ops->setup(pdev, indio_dev, xadc->irq); if (ret) @@ -1344,8 +1356,6 @@ static int xadc_probe(struct platform_device *pdev) err_free_irq: free_irq(xadc->irq, indio_dev); cancel_delayed_work_sync(&xadc->zynq_unmask_work); -err_clk_disable_unprepare: - clk_disable_unprepare(xadc->clk); err_free_samplerate_trigger: if (xadc->ops->flags & XADC_FLAGS_BUFFERED) iio_trigger_free(xadc->samplerate_trigger); @@ -1372,7 +1382,6 @@ static int xadc_remove(struct platform_device *pdev) } free_irq(xadc->irq, indio_dev); cancel_delayed_work_sync(&xadc->zynq_unmask_work); - clk_disable_unprepare(xadc->clk); return 0; } -- 2.29.1