Convert fxas21002c gyroscope sensor bindings documentation to yaml schema and remove the textual bindings document. Signed-off-by: Rui Miguel Silva <rmfrfs@xxxxxxxxx> --- .../bindings/iio/gyroscope/nxp,fxas21002c.txt | 31 -------- .../iio/gyroscope/nxp,fxas21002c.yaml | 77 +++++++++++++++++++ MAINTAINERS | 2 +- 3 files changed, 78 insertions(+), 32 deletions(-) delete mode 100644 Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt create mode 100644 Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml diff --git a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt deleted file mode 100644 index 465e104bbf14..000000000000 --- a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt +++ /dev/null @@ -1,31 +0,0 @@ -* NXP FXAS21002C Gyroscope device tree bindings - -http://www.nxp.com/products/sensors/gyroscopes/3-axis-digital-gyroscope:FXAS21002C - -Required properties: - - compatible : should be "nxp,fxas21002c" - - reg : the I2C address of the sensor or SPI chip select number for the - device. - - vdd-supply: phandle to the regulator that provides power to the sensor. - - vddio-supply: phandle to the regulator that provides power to the bus. - -Optional properties: - - reset-gpios : gpio used to reset the device, see gpio/gpio.txt - - interrupts : device support 2 interrupts, INT1 and INT2, - the interrupts can be triggered on rising or falling edges. - See interrupt-controller/interrupts.txt - - interrupt-names: should contain "INT1" or "INT2", the gyroscope interrupt - line in use. - - drive-open-drain: the interrupt/data ready line will be configured - as open drain, which is useful if several sensors share - the same interrupt line. This is a boolean property. - (This binding is taken from pinctrl/pinctrl-bindings.txt) - -Example: - -gyroscope@20 { - compatible = "nxp,fxas21002c"; - reg = <0x20>; - vdd-supply = <®_peri_3p15v>; - vddio-supply = <®_peri_3p15v>; -}; diff --git a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml new file mode 100644 index 000000000000..7680e97cf1d9 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/gyroscope/nxp,fxas21002c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP FXAS21002C Gyroscope Unit + +maintainers: + - Rui Miguel Silva <rmfrfs@xxxxxxxxx> + +description: | + 3 axis digital gyroscope device with an I2C and SPI interface. + http://www.nxp.com/products/sensors/gyroscopes/3-axis-digital-gyroscope:FXAS21002C + +properties: + compatible: + enum: + - nxp,fxas21002c + + reg: + maxItems: 1 + description: base address of the device + + vdd-supply: + description: Regulator that provides power to the sensor + + vddio-supply: + description: Regulator that provides power to the bus + + reset-gpios: + maxItems: 1 + description: GPIO connected to reset + + interrupts: + minItems: 1 + maxItems: 2 + description: device support 2 interrupts, INT1 and INT2, the interrupts can + be triggered on rising or falling edges. + + interrupt-names: + minItems: 1 + maxItems: 2 + items: + enum: + - INT1 + - INT2 + description: gyroscope interrupt line in use. + + drive-open-drain: + type: boolean + description: the interrupt/data ready line will be configured as open drain, + which is useful if several sensors share the same interrupt + line. + +required: + - compatible + - reg + - vdd-supply + - vddio-supply + +unevaluatedProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + gyroscope@20 { + compatible = "nxp,fxas21002c"; + reg = <0x20>; + + vdd-supply = <®_peri_3p15v>; + vddio-supply = <®_peri_3p15v>; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 6594f0966716..2e85e114c9c3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12469,7 +12469,7 @@ NXP FXAS21002C DRIVER M: Rui Miguel Silva <rmfrfs@xxxxxxxxx> L: linux-iio@xxxxxxxxxxxxxxx S: Maintained -F: Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.txt +F: Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml F: drivers/iio/gyro/fxas21002c.h F: drivers/iio/gyro/fxas21002c_core.c F: drivers/iio/gyro/fxas21002c_i2c.c -- 2.28.0
