On Sun, Oct 11, 2020 at 12:10 PM Jonathan Cameron <jic23@xxxxxxxxxx> wrote: > > From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> > > One quirk in the txt file was that the xclr gpio was specified as > gpio-xclr rather than gpios-xclr. I've fixed that in the xclr-gpios?, not gpios?-xclr > yaml version. > > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> > Cc: Marek Vasut <marex@xxxxxxx> > --- > .../bindings/iio/pressure/hoperf,hp03.yaml | 47 +++++++++++++++++++ > .../devicetree/bindings/iio/pressure/hp03.txt | 17 ------- > 2 files changed, 47 insertions(+), 17 deletions(-) > > diff --git a/Documentation/devicetree/bindings/iio/pressure/hoperf,hp03.yaml b/Documentation/devicetree/bindings/iio/pressure/hoperf,hp03.yaml > new file mode 100644 > index 000000000000..69a3759e23db > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/pressure/hoperf,hp03.yaml > @@ -0,0 +1,47 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/pressure/hoperf,hp03.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: HopeRF HP03 digital pressure/temperature sensors > + > +maintainers: > + - Marek Vasut <marex@xxxxxxx> > + > +description: | > + Digital pressure and temperature sensor with an I2C interface. > + > +properties: > + compatible: > + const: hoperf,hp03 > + > + reg: > + maxItems: 1 > + > + xclr-gpios: > + description: > + The XCLR pin is a reset of the ADC in the chip, it must be pulled > + HI before the conversion and readout of the value from the ADC > + registers and pulled LO afterward. > + maxItems: 1 > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + pressure@77 { > + compatible = "hoperf,hp03"; > + reg = <0x77>; > + xclr-gpios = <&portc 0 0x0>; > + }; > + }; > +... > diff --git a/Documentation/devicetree/bindings/iio/pressure/hp03.txt b/Documentation/devicetree/bindings/iio/pressure/hp03.txt > deleted file mode 100644 > index 831dbee7a5c3..000000000000 > --- a/Documentation/devicetree/bindings/iio/pressure/hp03.txt > +++ /dev/null > @@ -1,17 +0,0 @@ > -HopeRF HP03 digital pressure/temperature sensors > - > -Required properties: > -- compatible: must be "hoperf,hp03" > -- xclr-gpio: must be device tree identifier of the XCLR pin. > - The XCLR pin is a reset of the ADC in the chip, > - it must be pulled HI before the conversion and > - readout of the value from the ADC registers and > - pulled LO afterward. > - > -Example: > - > -hp03@77 { > - compatible = "hoperf,hp03"; > - reg = <0x77>; > - xclr-gpio = <&portc 0 0x0>; > -}; > -- > 2.28.0 >
