Thanks for the conversion. No idea which tag to put, so: Acked-by: Crt Mori <cmo@xxxxxxxxxxx> On Sun, 11 Oct 2020 at 19:10, Jonathan Cameron <jic23@xxxxxxxxxx> wrote: > > From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> > > Technically this could have gone in trivial-devices.yaml, but I have > kept it as a separate binding due to the detailed additional description > from the text file. > > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> > Cc: Crt Mori <cmo@xxxxxxxxxxx> > --- > .../iio/temperature/melexis,mlx90632.yaml | 55 +++++++++++++++++++ > .../bindings/iio/temperature/mlx90632.txt | 28 ---------- > 2 files changed, 55 insertions(+), 28 deletions(-) > > diff --git a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml > new file mode 100644 > index 000000000000..b547ddcd544a > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml > @@ -0,0 +1,55 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/temperature/melexis,mlx90632.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Melexis MLX90632 contactless Infra Red temperature sensor > + > +maintainers: > + - Crt Mori <cmo@xxxxxxxxxxx> > + > +description: | > + https://www.melexis.com/en/documents/documentation/datasheets/datasheet-mlx90632 > + > + There are various applications for the Infra Red contactless temperature > + sensor and MLX90632 is most suitable for consumer applications where > + measured object temperature is in range between -20 to 200 degrees > + Celsius with relative error of measurement below 1 degree Celsius in > + object temperature range for industrial applications. Since it can > + operate and measure ambient temperature in range of -20 to 85 degrees > + Celsius it is suitable also for outdoor use. > + > + Be aware that electronics surrounding the sensor can increase ambient > + temperature. MLX90632 can be calibrated to reduce the housing effect via > + already existing EEPROM parameters. > + > + Since measured object emissivity effects Infra Red energy emitted, > + emissivity should be set before requesting the object temperature. > + > +properties: > + compatible: > + const: melexis,mlx90632 > + > + reg: > + maxItems: 1 > + description: Default is 0x3a, but can be reprogrammed. > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + temp-sensor@3a { > + compatible = "melexis,mlx90632"; > + reg = <0x3a>; > + }; > + }; > +... > diff --git a/Documentation/devicetree/bindings/iio/temperature/mlx90632.txt b/Documentation/devicetree/bindings/iio/temperature/mlx90632.txt > deleted file mode 100644 > index 0b05812001f8..000000000000 > --- a/Documentation/devicetree/bindings/iio/temperature/mlx90632.txt > +++ /dev/null > @@ -1,28 +0,0 @@ > -* Melexis MLX90632 contactless Infra Red temperature sensor > - > -Link to datasheet: https://www.melexis.com/en/documents/documentation/datasheets/datasheet-mlx90632 > - > -There are various applications for the Infra Red contactless temperature sensor > -and MLX90632 is most suitable for consumer applications where measured object > -temperature is in range between -20 to 200 degrees Celsius with relative error > -of measurement below 1 degree Celsius in object temperature range for > -industrial applications. Since it can operate and measure ambient temperature > -in range of -20 to 85 degrees Celsius it is suitable also for outdoor use. > - > -Be aware that electronics surrounding the sensor can increase ambient > -temperature. MLX90632 can be calibrated to reduce the housing effect via > -already existing EEPROM parameters. > - > -Since measured object emissivity effects Infra Red energy emitted, emissivity > -should be set before requesting the object temperature. > - > -Required properties: > - - compatible: should be "melexis,mlx90632" > - - reg: the I2C address of the sensor (default 0x3a) > - > -Example: > - > -mlx90632@3a { > - compatible = "melexis,mlx90632"; > - reg = <0x3a>; > -}; > -- > 2.28.0 >
