From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
The conversion is straight forward, but leaves an open question.
The compatible for this device has never had a vendor. I suspect
this because it is non-obvious who actually makes the module. It is
resold by numerous vendors and it may be that there is no single vendor
of the parts they are using. If anyone has any more info on the
vendor, please let me know and we can add a more informative
compatible.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Cc: Harald Geyer <harald@xxxxxxxxx>
---
.../bindings/iio/humidity/dht11.txt | 14 -------
.../bindings/iio/humidity/dht11.yaml | 41 +++++++++++++++++++
2 files changed, 41 insertions(+), 14 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/humidity/dht11.txt b/Documentation/devicetree/bindings/iio/humidity/dht11.txt
deleted file mode 100644
index ecc24c199fd6..000000000000
--- a/Documentation/devicetree/bindings/iio/humidity/dht11.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-* DHT11 humidity/temperature sensor (and compatibles like DHT22)
-
-Required properties:
- - compatible: Should be "dht11"
- - gpios: Should specify the GPIO connected to the sensor's data
- line, see "gpios property" in
- Documentation/devicetree/bindings/gpio/gpio.txt.
-
-Example:
-
-humidity_sensor {
- compatible = "dht11";
- gpios = <&gpio0 6 0>;
-}
diff --git a/Documentation/devicetree/bindings/iio/humidity/dht11.yaml b/Documentation/devicetree/bindings/iio/humidity/dht11.yaml
new file mode 100644
index 000000000000..38ec4c302760
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/humidity/dht11.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/humidity/dht11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DHT11 humidity + temperature sensor
+
+maintainers:
+ - Harald Geyer <harald@xxxxxxxxx>
+
+description: |
+ A simple and low cost module providing a non standard single GPIO based
+ interface. Whilst commonly available it is not easy to establish if there
+ is a single manufacturer for this part.
+
+properties:
+ compatible:
+ const: dht11
+
+ reg:
+ maxItems: 1
+
+ gpios:
+ maxItems: 1
+ description:
+ Single, interrupt capable, GPIO used to communicate with the device.
+
+required:
+ - compatible
+ - gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ humidity_sensor {
+ compatible = "dht11";
+ gpios = <&gpio0 6 0>;
+ };
+...
--
2.28.0
