Looking at this again, it appears that there is actually control for it at offset 0x6818 of pmu_syscon (0xe0108000) [1]. However, it defaults to enabled so it's not required for proper use of the block. Whether it should be present in the schema/DTS is up to you. Thanks, Jonathan [1] https://android.googlesource.com/kernel/samsung/+/refs/heads/android-samsung-3.0-jb-mr0/arch/arm/mach-s5pv210/include/mach/regs-clock.h#325 On 2020-09-07 9:11 a.m., Krzysztof Kozlowski wrote: > The ADC in S5Pv210 does not have ADC phy registers in separate block for > which syscon would be needed. Remove this requirement to fix dtbs_check > warnings like: > > arch/arm/boot/dts/s5pv210-fascinate4g.dt.yaml: adc@e1700000: 'samsung,syscon-phandle' is a required property > > Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx> > --- > .../devicetree/bindings/iio/adc/samsung,exynos-adc.yaml | 1 - > 1 file changed, 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml > index 89b4f9c252a6..75174af72288 100644 > --- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml > @@ -81,7 +81,6 @@ allOf: > - samsung,exynos-adc-v2 > - samsung,exynos3250-adc > - samsung,exynos4212-adc > - - samsung,s5pv210-adc > then: > required: > - samsung,syscon-phandle >
