The fixed clocks are kept under dedicated 'external-clocks' node, thus a
fake 'reg' was added. This is not correct with dtschema as fixed-clock
binding does not have a 'reg' property. Moving fixed clocks out of
'soc' to root node fixes multiple dtbs_check warnings:
external-clocks: $nodename:0: 'external-clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
external-clocks: #size-cells:0:0: 0 is not one of [1, 2]
external-clocks: oscillator@0:reg:0: [0] is too short
external-clocks: oscillator@1:reg:0: [1] is too short
external-clocks: 'ranges' is a required property
oscillator@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
arch/arm/boot/dts/s5pv210.dtsi | 36 +++++++++++++---------------------
1 file changed, 14 insertions(+), 22 deletions(-)
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 84e4447931de..5c760a6d7955 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -52,34 +52,26 @@
};
};
+ xxti: oscillator-0 {
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ clock-output-names = "xxti";
+ #clock-cells = <0>;
+ };
+
+ xusbxti: oscillator-1 {
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ clock-output-names = "xusbxti";
+ #clock-cells = <0>;
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
- external-clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- xxti: oscillator@0 {
- compatible = "fixed-clock";
- reg = <0>;
- clock-frequency = <0>;
- clock-output-names = "xxti";
- #clock-cells = <0>;
- };
-
- xusbxti: oscillator@1 {
- compatible = "fixed-clock";
- reg = <1>;
- clock-frequency = <0>;
- clock-output-names = "xusbxti";
- #clock-cells = <0>;
- };
- };
-
onenand: onenand@b0600000 {
compatible = "samsung,s5pv210-onenand";
reg = <0xb0600000 0x2000>,
--
2.17.1
