On Fri, 4 Sep 2020 at 14:19, Andy Shevchenko <andy.shevchenko@xxxxxxxxx> wrote:
>
> On Fri, Sep 4, 2020 at 3:08 PM Crt Mori <cmo@xxxxxxxxxxx> wrote:
> >
> > Since object temperature might be different than the sensor temperature
> > the infrared sensors should provide an interface to inject ambient
> > temperature. This was in past done via write to ambient temperature
> > interface (in_temp_ambient_raw), but I think most people did not know
> > about it. This solution introduces a new iio type of the CALIBAMBIENT
> > which is hopefully more descriptive and more explicit about the purpose
> > and capabilities of the sensors.
>
> I'm fine, but one really picky comment below. I don't think a new
> version is needed till Jonathan will ask for it.
>
> > Signed-off-by: Crt Mori <cmo@xxxxxxxxxxx>
> > Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
> > ---
> > drivers/iio/industrialio-core.c | 1 +
> > drivers/iio/temperature/mlx90632.c | 8 +++++++-
> > include/linux/iio/types.h | 1 +
> > 3 files changed, 9 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
> > index 606d5e61c575..941011502f4d 100644
> > --- a/drivers/iio/industrialio-core.c
> > +++ b/drivers/iio/industrialio-core.c
> > @@ -165,6 +165,7 @@ static const char * const iio_chan_info_postfix[] = {
> > [IIO_CHAN_INFO_CALIBEMISSIVITY] = "calibemissivity",
> > [IIO_CHAN_INFO_OVERSAMPLING_RATIO] = "oversampling_ratio",
> > [IIO_CHAN_INFO_THERMOCOUPLE_TYPE] = "thermocouple_type",
> > + [IIO_CHAN_INFO_CALIBAMBIENT] = "calibambient",
> > };
> >
> > #if defined(CONFIG_DEBUG_FS)
> > diff --git a/drivers/iio/temperature/mlx90632.c b/drivers/iio/temperature/mlx90632.c
> > index 94bca2b2866a..8e60d401b703 100644
> > --- a/drivers/iio/temperature/mlx90632.c
> > +++ b/drivers/iio/temperature/mlx90632.c
> > @@ -761,6 +761,9 @@ static int mlx90632_read_raw(struct iio_dev *indio_dev,
> > *val2 = data->emissivity * 1000;
> > }
> > return IIO_VAL_INT_PLUS_MICRO;
>
> Blank line is missed here.
>
I don't have new lines before and after case: in switch statements
through whole file, so I decided to remove the blank line 4 rows down
as well to keep it all nicely unified in v3.
> > + case IIO_CHAN_INFO_CALIBAMBIENT:
> > + *val = data->object_ambient_temperature;
> > + return IIO_VAL_INT;
> >
> > default:
> > return -EINVAL;
> > @@ -781,6 +784,9 @@ static int mlx90632_write_raw(struct iio_dev *indio_dev,
> > return -EINVAL;
> > data->emissivity = val * 1000 + val2 / 1000;
> > return 0;
> > + case IIO_CHAN_INFO_CALIBAMBIENT:
> > + data->object_ambient_temperature = val;
> > + return 0;
> > default:
> > return -EINVAL;
> > }
> > @@ -798,7 +804,7 @@ static const struct iio_chan_spec mlx90632_channels[] = {
> > .modified = 1,
> > .channel2 = IIO_MOD_TEMP_OBJECT,
> > .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
> > - BIT(IIO_CHAN_INFO_CALIBEMISSIVITY),
> > + BIT(IIO_CHAN_INFO_CALIBEMISSIVITY) | BIT(IIO_CHAN_INFO_CALIBAMBIENT),
> > },
> > };
> >
> > diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h
> > index e6fd3645963c..1e3ed6f55bca 100644
> > --- a/include/linux/iio/types.h
> > +++ b/include/linux/iio/types.h
> > @@ -59,6 +59,7 @@ enum iio_chan_info_enum {
> > IIO_CHAN_INFO_CALIBEMISSIVITY,
> > IIO_CHAN_INFO_OVERSAMPLING_RATIO,
> > IIO_CHAN_INFO_THERMOCOUPLE_TYPE,
> > + IIO_CHAN_INFO_CALIBAMBIENT,
> > };
> >
> > #endif /* _IIO_TYPES_H_ */
> > --
> > 2.25.1
> >
>
>
> --
> With Best Regards,
> Andy Shevchenko
