On Fri, Sep 4, 2020 at 3:08 PM Crt Mori <cmo@xxxxxxxxxxx> wrote:
>
> Since object temperature might be different than the sensor temperature
> the infrared sensors should provide an interface to inject ambient
> temperature. This was in past done via write to ambient temperature
> interface (in_temp_ambient_raw), but I think most people did not know
> about it. This solution introduces a new iio type of the CALIBAMBIENT
> which is hopefully more descriptive and more explicit about the purpose
> and capabilities of the sensors.
I'm fine, but one really picky comment below. I don't think a new
version is needed till Jonathan will ask for it.
> Signed-off-by: Crt Mori <cmo@xxxxxxxxxxx>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
> ---
> drivers/iio/industrialio-core.c | 1 +
> drivers/iio/temperature/mlx90632.c | 8 +++++++-
> include/linux/iio/types.h | 1 +
> 3 files changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
> index 606d5e61c575..941011502f4d 100644
> --- a/drivers/iio/industrialio-core.c
> +++ b/drivers/iio/industrialio-core.c
> @@ -165,6 +165,7 @@ static const char * const iio_chan_info_postfix[] = {
> [IIO_CHAN_INFO_CALIBEMISSIVITY] = "calibemissivity",
> [IIO_CHAN_INFO_OVERSAMPLING_RATIO] = "oversampling_ratio",
> [IIO_CHAN_INFO_THERMOCOUPLE_TYPE] = "thermocouple_type",
> + [IIO_CHAN_INFO_CALIBAMBIENT] = "calibambient",
> };
>
> #if defined(CONFIG_DEBUG_FS)
> diff --git a/drivers/iio/temperature/mlx90632.c b/drivers/iio/temperature/mlx90632.c
> index 94bca2b2866a..8e60d401b703 100644
> --- a/drivers/iio/temperature/mlx90632.c
> +++ b/drivers/iio/temperature/mlx90632.c
> @@ -761,6 +761,9 @@ static int mlx90632_read_raw(struct iio_dev *indio_dev,
> *val2 = data->emissivity * 1000;
> }
> return IIO_VAL_INT_PLUS_MICRO;
Blank line is missed here.
> + case IIO_CHAN_INFO_CALIBAMBIENT:
> + *val = data->object_ambient_temperature;
> + return IIO_VAL_INT;
>
> default:
> return -EINVAL;
> @@ -781,6 +784,9 @@ static int mlx90632_write_raw(struct iio_dev *indio_dev,
> return -EINVAL;
> data->emissivity = val * 1000 + val2 / 1000;
> return 0;
> + case IIO_CHAN_INFO_CALIBAMBIENT:
> + data->object_ambient_temperature = val;
> + return 0;
> default:
> return -EINVAL;
> }
> @@ -798,7 +804,7 @@ static const struct iio_chan_spec mlx90632_channels[] = {
> .modified = 1,
> .channel2 = IIO_MOD_TEMP_OBJECT,
> .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
> - BIT(IIO_CHAN_INFO_CALIBEMISSIVITY),
> + BIT(IIO_CHAN_INFO_CALIBEMISSIVITY) | BIT(IIO_CHAN_INFO_CALIBAMBIENT),
> },
> };
>
> diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h
> index e6fd3645963c..1e3ed6f55bca 100644
> --- a/include/linux/iio/types.h
> +++ b/include/linux/iio/types.h
> @@ -59,6 +59,7 @@ enum iio_chan_info_enum {
> IIO_CHAN_INFO_CALIBEMISSIVITY,
> IIO_CHAN_INFO_OVERSAMPLING_RATIO,
> IIO_CHAN_INFO_THERMOCOUPLE_TYPE,
> + IIO_CHAN_INFO_CALIBAMBIENT,
> };
>
> #endif /* _IIO_TYPES_H_ */
> --
> 2.25.1
>
--
With Best Regards,
Andy Shevchenko
