There is some inconsistency and whitespace cleanup performed in this
patch. It was done on top of my other patches, but I can rebase to head
of the togreg branch if it would go in sooner.
Signed-off-by: Crt Mori <cmo@xxxxxxxxxxx>
---
drivers/iio/temperature/mlx90632.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/iio/temperature/mlx90632.c b/drivers/iio/temperature/mlx90632.c
index bb35a65bb9f0..d966e5387c48 100644
--- a/drivers/iio/temperature/mlx90632.c
+++ b/drivers/iio/temperature/mlx90632.c
@@ -100,10 +100,10 @@
#define MLX90632_DSP_VERSION 5 /* DSP version */
#define MLX90632_DSP_MASK GENMASK(7, 0) /* DSP version in EE_VERSION */
#define MLX90632_RESET_CMD 0x0006 /* Reset sensor (address or global) */
-#define MLX90632_REF_12 12LL /**< ResCtrlRef value of Ch 1 or Ch 2 */
-#define MLX90632_REF_3 12LL /**< ResCtrlRef value of Channel 3 */
-#define MLX90632_MAX_MEAS_NUM 31 /**< Maximum measurements in list */
-#define MLX90632_SLEEP_DELAY_MS 3000 /**< Autosleep delay */
+#define MLX90632_REF_12 12LL /* ResCtrlRef value of Ch 1 or Ch 2 */
+#define MLX90632_REF_3 12LL /* ResCtrlRef value of Channel 3 */
+#define MLX90632_MAX_MEAS_NUM 31 /* Maximum measurements in list */
+#define MLX90632_SLEEP_DELAY_MS 3000 /* Autosleep delay */
#define MLX90632_EXTENDED_LIMIT 27000 /* Extended mode raw value limit */
struct mlx90632_data {
@@ -884,7 +884,7 @@ static int mlx90632_probe(struct i2c_client *client,
mlx90632->mtyp = MLX90632_MTYP_EXTENDED;
} else if ((read & MLX90632_DSP_MASK) == MLX90632_DSP_VERSION) {
dev_dbg(&client->dev,
- "Detected Unknown EEPROM calibration %x\n", read);
+ "Detected Unknown EEPROM calibration %x\n", read);
} else {
dev_err(&client->dev,
"Wrong DSP version %x (expected %x)\n",
--
2.25.1
