From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Straight forward conversion of this binding for this
current sense amplifier and ADC.
Cc: Jacopo Mondi <jacopo@xxxxxxxxxx>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
---
.../devicetree/bindings/iio/adc/max9611.txt | 27 ----------
.../bindings/iio/adc/maxim,max9611.yaml | 49 +++++++++++++++++++
2 files changed, 49 insertions(+), 27 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/adc/max9611.txt b/Documentation/devicetree/bindings/iio/adc/max9611.txt
deleted file mode 100644
index ab4f43145ae5..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/max9611.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Maxim max9611/max9612 current sense amplifier with 12-bits ADC interface
-
-Maxim max9611/max9612 is an high-side current sense amplifier with integrated
-12-bits ADC communicating over I2c bus.
-The device node for this driver shall be a child of a I2c controller.
-
-Required properties
- - compatible: Should be "maxim,max9611" or "maxim,max9612"
- - reg: The 7-bits long I2c address of the device
- - shunt-resistor-micro-ohms: Value, in micro Ohms, of the current sense shunt
- resistor
-
-Example:
-
-&i2c4 {
- csa: adc@7c {
- compatible = "maxim,max9611";
- reg = <0x7c>;
-
- shunt-resistor-micro-ohms = <5000>;
- };
-};
-
-This device node describes a current sense amplifier sitting on I2c4 bus
-with address 0x7c (read address is 0xf9, write address is 0xf8).
-A sense resistor of 0,005 Ohm is installed between RS+ and RS- current-sensing
-inputs.
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml
new file mode 100644
index 000000000000..a9fc05e6b62c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max9611.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX9611 and similar current sense amplifiers with integrated ADCs
+
+maintainers:
+ - Jacopo Mondi <jacopo@xxxxxxxxxx>
+
+description: |
+ These devices combine a high-side current sense amplifier with a 12 bit ADC.
+ They have an i2c interface.
+
+properties:
+ compatible:
+ enum:
+ - maxim,max9611
+ - maxim,max9612
+
+ reg:
+ maxItems: 1
+
+ shunt-resistor-micro-ohms:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Value in micro Ohms of the shunt resistor connected between the RS+ and
+ RS- inputs, across which the current is measured. Value needed to compute
+ the scaling of the measured current.
+
+required:
+ - compatible
+ - reg
+ - shunt-resistor-micro-ohms
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@7c {
+ compatible = "maxim,max9611";
+ reg = <0x7c>;
+ shunt-resistor-micro-ohms = <5000>;
+ };
+ };
+...
--
2.27.0
