From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv() data with alignment
explicitly requested. This data is allocated with kzalloc so no
data can leak apart from previous readings.
Fixes: e717f8c6dfec ("iio: adc: Add the TI ads124s08 ADC code")
Reported-by: Lars-Peter Clausen <lars@xxxxxxxxxx>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Cc: Dan Murphy <dmurphy@xxxxxx>
---
drivers/iio/adc/ti-ads124s08.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/adc/ti-ads124s08.c b/drivers/iio/adc/ti-ads124s08.c
index f1ee3b1e2827..fb0da62b09f5 100644
--- a/drivers/iio/adc/ti-ads124s08.c
+++ b/drivers/iio/adc/ti-ads124s08.c
@@ -99,6 +99,11 @@ struct ads124s_private {
struct gpio_desc *reset_gpio;
struct spi_device *spi;
struct mutex lock;
+ /*
+ * Used to correctly align data.
+ * Ensure timestamp is naturally aligned.
+ */
+ u32 buffer[ADS124S08_MAX_CHANNELS + sizeof(s64)/sizeof(u16)] __aligned(8);
u8 data[5] ____cacheline_aligned;
};
@@ -269,7 +274,6 @@ static irqreturn_t ads124s_trigger_handler(int irq, void *p)
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
struct ads124s_private *priv = iio_priv(indio_dev);
- u32 buffer[ADS124S08_MAX_CHANNELS + sizeof(s64)/sizeof(u16)];
int scan_index, j = 0;
int ret;
@@ -284,7 +288,7 @@ static irqreturn_t ads124s_trigger_handler(int irq, void *p)
if (ret)
dev_err(&priv->spi->dev, "Start ADC conversions failed\n");
- buffer[j] = ads124s_read(indio_dev, scan_index);
+ priv->buffer[j] = ads124s_read(indio_dev, scan_index);
ret = ads124s_write_cmd(indio_dev, ADS124S08_STOP_CONV);
if (ret)
dev_err(&priv->spi->dev, "Stop ADC conversions failed\n");
@@ -292,7 +296,7 @@ static irqreturn_t ads124s_trigger_handler(int irq, void *p)
j++;
}
- iio_push_to_buffers_with_timestamp(indio_dev, buffer,
+ iio_push_to_buffers_with_timestamp(indio_dev, priv->buffer,
pf->timestamp);
iio_trigger_notify_done(indio_dev->trig);
--
2.26.2
