Re: [PATCH v2 4/5] power: supply: Add support for mps mp2629 battery charger

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 15 Mar 2020 22:29:39 +0100
saravanan sekar <sravanhome@xxxxxxxxx> wrote:

> Hi Jonathan,
> 
> On 15/03/20 11:45 am, Jonathan Cameron wrote:
> > On Sun, 15 Mar 2020 01:00:12 +0100
> > Saravanan Sekar <sravanhome@xxxxxxxxx> wrote:
> >  
> >> The mp2629 provides switching-mode battery charge management for
> >> single-cell Li-ion or Li-polymer battery. Driver supports the
> >> access/control input source and battery charging parameters.
> >>
> >> Signed-off-by: Saravanan Sekar <sravanhome@xxxxxxxxx>  
> > Hi Saravanan.
> >
> > Just to play devils advocate, are the ADC channels on this device actually
> > usable for anything other than power supply control?
> >
> > If not, what is the benefit in exposing them at all to IIO and going through
> > the dance of having an MFD?  As far as I'm concerned its perfectly acceptable
> > to have ADC channels and handling embedded directly in a power supply driver
> > if that's all they are for.
> >
> > Things get a lot messier when we have general purpose ADC channels that might
> > be used for battery monitoring or a device that provides some AUX channels.
> > As far as I can tell (can't get to the data sheet right now as waiting for
> > account confirmation), this isn't true here.  They are internal measurements
> > of the power supply and battery charging outputs.
> >
> > My initial impression is you would be better off with a monolithic power
> > supply driver combining the 3 parts you currently have and not exposing
> > IIO interfaces at all.  
> 
> The basic idea is to isolate ADC reading from charger control separately and

That can be done structurally within one driver...

> 
> another reason is ADC reading of system voltage and NTC voltage (not 
> part of current
> 
> patch) is not used by power supply control, which has to expose by IIO.
> 
This last reason is fair enough.  Makes more sense now ;)
> 
> Thanks,
> Saravanan
> 
> >
> > Thanks,
> >
> > Jonathan
> >  
> >> ---
> >>   drivers/power/supply/Kconfig          |  10 +
> >>   drivers/power/supply/Makefile         |   1 +
> >>   drivers/power/supply/mp2629_charger.c | 702 ++++++++++++++++++++++++++
> >>   3 files changed, 713 insertions(+)
> >>   create mode 100644 drivers/power/supply/mp2629_charger.c
> >>
> >> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> >> index f3424fdce341..f45409d26d54 100644
> >> --- a/drivers/power/supply/Kconfig
> >> +++ b/drivers/power/supply/Kconfig
> >> @@ -541,6 +541,16 @@ config CHARGER_MAX8998
> >>   	  Say Y to enable support for the battery charger control sysfs and
> >>   	  platform data of MAX8998/LP3974 PMICs.
> >>   
> >> +config CHARGER_MP2629
> >> +	bool "Monolithic power system MP2629 Battery charger"
> >> +	depends on MFD_MP2629
> >> +	depends on MP2629_ADC
> >> +	depends on IIO
> >> +	help
> >> +	  Select this option to enable support for Monolithic power system
> >> +	  Battery charger. This driver provies Battery charger power management
> >> +	  functions on the systems.
> >> +
> >>   config CHARGER_QCOM_SMBB
> >>   	tristate "Qualcomm Switch-Mode Battery Charger and Boost"
> >>   	depends on MFD_SPMI_PMIC || COMPILE_TEST
> >> diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
> >> index 6c7da920ea83..41cb64f09e49 100644
> >> --- a/drivers/power/supply/Makefile
> >> +++ b/drivers/power/supply/Makefile
> >> @@ -75,6 +75,7 @@ obj-$(CONFIG_CHARGER_MAX77650)	+= max77650-charger.o
> >>   obj-$(CONFIG_CHARGER_MAX77693)	+= max77693_charger.o
> >>   obj-$(CONFIG_CHARGER_MAX8997)	+= max8997_charger.o
> >>   obj-$(CONFIG_CHARGER_MAX8998)	+= max8998_charger.o
> >> +obj-$(CONFIG_CHARGER_MP2629)	+= mp2629_charger.o
> >>   obj-$(CONFIG_CHARGER_QCOM_SMBB)	+= qcom_smbb.o
> >>   obj-$(CONFIG_CHARGER_BQ2415X)	+= bq2415x_charger.o
> >>   obj-$(CONFIG_CHARGER_BQ24190)	+= bq24190_charger.o
> >> diff --git a/drivers/power/supply/mp2629_charger.c b/drivers/power/supply/mp2629_charger.c
> >> new file mode 100644
> >> index 000000000000..8dab4250710f
> >> --- /dev/null
> >> +++ b/drivers/power/supply/mp2629_charger.c
> >> @@ -0,0 +1,702 @@
> >> +// SPDX-License-Identifier: GPL-2.0-or-later
> >> +/*
> >> + * MP2629 battery charger driver
> >> + *
> >> + * Copyright 2020 Monolithic Power Systems, Inc
> >> + *
> >> + * Author: Saravanan Sekar <sravanhome@xxxxxxxxx>
> >> + */
> >> +
> >> +#include <linux/module.h>
> >> +#include <linux/platform_device.h>
> >> +#include <linux/of_device.h>
> >> +#include <linux/interrupt.h>
> >> +#include <linux/iio/consumer.h>
> >> +#include <linux/iio/types.h>
> >> +#include <linux/power_supply.h>
> >> +#include <linux/workqueue.h>
> >> +#include <linux/regmap.h>
> >> +
> >> +#include <linux/mfd/core.h>
> >> +#include <linux/mfd/mp2629.h>
> >> +
> >> +#define MP2629_REG_INPUT_ILIM		0x00
> >> +#define MP2629_REG_INPUT_VLIM		0x01
> >> +#define MP2629_REG_CHARGE_CTRL		0x04
> >> +#define MP2629_REG_CHARGE_ILIM		0x05
> >> +#define MP2629_REG_PRECHARGE		0x06
> >> +#define MP2629_REG_TERM_CURRENT		0x06
> >> +#define MP2629_REG_CHARGE_VLIM		0x07
> >> +#define MP2629_REG_TIMER_CTRL		0x08
> >> +#define MP2629_REG_IMPEDANCE_COMP	0x09
> >> +#define MP2629_REG_INTERRUPT		0x0b
> >> +#define MP2629_REG_STATUS		0x0c
> >> +#define MP2629_REG_FAULT		0x0d
> >> +
> >> +#define MP2629_MASK_INPUT_TYPE		0xe0
> >> +#define MP2629_MASK_CHARGE_TYPE		0x18
> >> +#define MP2629_MASK_CHARGE_CTRL		0x30
> >> +#define MP2629_MASK_WDOG_CTRL		0x30
> >> +#define MP2629_MASK_IMPEDANCE		0xf0
> >> +
> >> +#define MP2629_INPUTSOURCE_CHANGE	GENMASK(7, 5)
> >> +#define MP2629_CHARGING_CHANGE		GENMASK(4, 3)
> >> +#define MP2629_FAULT_BATTERY		BIT(3)
> >> +#define MP2629_FAULT_THERMAL		BIT(4)
> >> +#define MP2629_FAULT_INPUT		BIT(5)
> >> +#define MP2629_FAULT_OTG		BIT(6)
> >> +
> >> +#define MP2629_MAX_BATT_CAPACITY	100
> >> +
> >> +#define MP2629_PROPS(_idx, _min, _max, _step)		\
> >> +	[_idx] = {					\
> >> +		.min	= _min,				\
> >> +		.max	= _max,				\
> >> +		.step	= _step,			\
> >> +}
> >> +
> >> +enum mp2629_source_type {
> >> +	MP2629_SOURCE_TYPE_NO_INPUT,
> >> +	MP2629_SOURCE_TYPE_NON_STD,
> >> +	MP2629_SOURCE_TYPE_SDP,
> >> +	MP2629_SOURCE_TYPE_CDP,
> >> +	MP2629_SOURCE_TYPE_DCP,
> >> +	MP2629_SOURCE_TYPE_OTG = 7,
> >> +};
> >> +
> >> +enum mp2629_field {
> >> +	INPUT_ILIM,
> >> +	INPUT_VLIM,
> >> +	CHARGE_ILIM,
> >> +	CHARGE_VLIM,
> >> +	PRECHARGE,
> >> +	TERM_CURRENT,
> >> +};
> >> +
> >> +struct mp2629_charger {
> >> +	struct mp2629_info *info;
> >> +	struct device *dev;
> >> +	struct work_struct charger_work;
> >> +	int status;
> >> +	int fault;
> >> +
> >> +	struct regmap_field *regmap_fields[TERM_CURRENT + 1];
> >> +	struct mutex lock;
> >> +	struct power_supply *usb;
> >> +	struct power_supply *battery;
> >> +	struct iio_channel *iiochan[MP2629_ADC_CHAN_END];
> >> +};
> >> +
> >> +struct mp2629_prop {
> >> +	int reg;
> >> +	int mask;
> >> +	int min;
> >> +	int max;
> >> +	int step;
> >> +	int shift;
> >> +};
> >> +
> >> +static enum power_supply_usb_type mp2629_usb_types[] = {
> >> +	POWER_SUPPLY_USB_TYPE_SDP,
> >> +	POWER_SUPPLY_USB_TYPE_DCP,
> >> +	POWER_SUPPLY_USB_TYPE_CDP,
> >> +	POWER_SUPPLY_USB_TYPE_PD_DRP,
> >> +	POWER_SUPPLY_USB_TYPE_UNKNOWN
> >> +};
> >> +
> >> +static enum power_supply_property mp2629_charger_usb_props[] = {
> >> +	POWER_SUPPLY_PROP_ONLINE,
> >> +	POWER_SUPPLY_PROP_USB_TYPE,
> >> +	POWER_SUPPLY_PROP_VOLTAGE_NOW,
> >> +	POWER_SUPPLY_PROP_CURRENT_NOW,
> >> +	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
> >> +	POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT,
> >> +};
> >> +
> >> +static enum power_supply_property mp2629_charger_bat_props[] = {
> >> +	POWER_SUPPLY_PROP_STATUS,
> >> +	POWER_SUPPLY_PROP_HEALTH,
> >> +	POWER_SUPPLY_PROP_CHARGE_TYPE,
> >> +	POWER_SUPPLY_PROP_VOLTAGE_NOW,
> >> +	POWER_SUPPLY_PROP_CURRENT_NOW,
> >> +	POWER_SUPPLY_PROP_CAPACITY,
> >> +	POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
> >> +	POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
> >> +	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
> >> +	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
> >> +	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
> >> +	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
> >> +};
> >> +
> >> +static struct mp2629_prop props[] = {
> >> +	MP2629_PROPS(INPUT_ILIM, 100000, 3250000, 50000),
> >> +	MP2629_PROPS(INPUT_VLIM, 3800000, 5300000, 100000),
> >> +	MP2629_PROPS(CHARGE_ILIM, 320000, 4520000, 40000),
> >> +	MP2629_PROPS(CHARGE_VLIM, 3400000, 4670000, 10000),
> >> +	MP2629_PROPS(PRECHARGE, 120000, 720000, 40000),
> >> +	MP2629_PROPS(TERM_CURRENT, 80000, 680000, 40000),
> >> +};
> >> +
> >> +static const struct reg_field mp2629_reg_fields[] = {
> >> +	[INPUT_ILIM]	= REG_FIELD(MP2629_REG_INPUT_ILIM, 0, 5),
> >> +	[INPUT_VLIM]	= REG_FIELD(MP2629_REG_INPUT_VLIM, 0, 3),
> >> +	[CHARGE_ILIM]	= REG_FIELD(MP2629_REG_CHARGE_ILIM, 0, 6),
> >> +	[CHARGE_VLIM]	= REG_FIELD(MP2629_REG_CHARGE_VLIM, 1, 7),
> >> +	[PRECHARGE]	= REG_FIELD(MP2629_REG_PRECHARGE, 4, 7),
> >> +	[TERM_CURRENT]	= REG_FIELD(MP2629_REG_TERM_CURRENT, 0, 3),
> >> +};
> >> +
> >> +static char *adc_chan_name[] = {
> >> +	"mp2629-batt-volt",
> >> +	"mp2629-system-volt",
> >> +	"mp2629-input-volt",
> >> +	"mp2629-batt-current",
> >> +	"mp2629-input-current",
> >> +};
> >> +
> >> +static int mp2629_read_adc(struct mp2629_charger *charger,
> >> +			   enum mp2629_adc_chan ch,
> >> +			   union power_supply_propval *val)
> >> +{
> >> +	int ret;
> >> +	int chval;
> >> +
> >> +	ret = iio_read_channel_processed(charger->iiochan[ch], &chval);
> >> +	if (ret < 0)
> >> +		return ret;
> >> +
> >> +	val->intval = chval * 1000;
> >> +
> >> +	return 0;
> >> +}
> >> +
> >> +static int mp2629_get_prop(struct mp2629_charger *charger,
> >> +			   enum mp2629_field fld,
> >> +			   union power_supply_propval *val)
> >> +{
> >> +	int ret;
> >> +	unsigned int rval;
> >> +
> >> +	ret = regmap_field_read(charger->regmap_fields[fld], &rval);
> >> +	if (!ret)
> >> +		val->intval = (rval * props[fld].step) + props[fld].min;
> >> +
> >> +	return ret;
> >> +}
> >> +
> >> +static int mp2629_set_prop(struct mp2629_charger *charger,
> >> +			   enum mp2629_field fld,
> >> +			   const union power_supply_propval *val)
> >> +{
> >> +	unsigned int rval;
> >> +
> >> +	if (val->intval < props[fld].min || val->intval > props[fld].max)
> >> +		return -EINVAL;
> >> +
> >> +	rval = (val->intval - props[fld].min) / props[fld].step;
> >> +	return regmap_field_write(charger->regmap_fields[fld], rval);
> >> +}
> >> +
> >> +static int mp2629_get_battery_capacity(struct mp2629_charger *charger,
> >> +				       union power_supply_propval *val)
> >> +{
> >> +	union power_supply_propval vnow, vlim;
> >> +	int ret;
> >> +
> >> +	ret = mp2629_read_adc(charger, MP2629_BATT_VOLT, &vnow);
> >> +	if (ret)
> >> +		return ret;
> >> +
> >> +	ret = mp2629_get_prop(charger, CHARGE_VLIM, &vlim);
> >> +	if (ret)
> >> +		return ret;
> >> +
> >> +	val->intval = (vnow.intval * 100) / vlim.intval;
> >> +	val->intval = min(val->intval, MP2629_MAX_BATT_CAPACITY);
> >> +
> >> +	return 0;
> >> +}
> >> +
> >> +static int mp2629_charger_battery_get_prop(struct power_supply *psy,
> >> +					enum power_supply_property psp,
> >> +					union power_supply_propval *val)
> >> +{
> >> +	struct mp2629_charger *charger = dev_get_drvdata(psy->dev.parent);
> >> +	struct mp2629_info *info = charger->info;
> >> +	unsigned int rval;
> >> +	int ret = 0;
> >> +
> >> +	switch (psp) {
> >> +	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> >> +		ret = mp2629_read_adc(charger, MP2629_BATT_VOLT, val);
> >> +		break;
> >> +
> >> +	case POWER_SUPPLY_PROP_CURRENT_NOW:
> >> +		ret = mp2629_read_adc(charger, MP2629_BATT_CURRENT, val);
> >> +		break;
> >> +
> >> +	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
> >> +		val->intval = 4520000;
> >> +		break;
> >> +
> >> +	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
> >> +		val->intval = 4670000;
> >> +		break;
> >> +
> >> +	case POWER_SUPPLY_PROP_CAPACITY:
> >> +		ret = mp2629_get_battery_capacity(charger, val);
> >> +		break;
> >> +
> >> +	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
> >> +		ret = mp2629_get_prop(charger, TERM_CURRENT, val);
> >> +		break;
> >> +
> >> +	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
> >> +		ret = mp2629_get_prop(charger, PRECHARGE, val);
> >> +		break;
> >> +
> >> +	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
> >> +		ret = mp2629_get_prop(charger, CHARGE_VLIM, val);
> >> +		break;
> >> +
> >> +	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> >> +		ret = mp2629_get_prop(charger, CHARGE_ILIM, val);
> >> +		break;
> >> +
> >> +	case POWER_SUPPLY_PROP_HEALTH:
> >> +		if (!charger->fault)
> >> +			val->intval = POWER_SUPPLY_HEALTH_GOOD;
> >> +		if (MP2629_FAULT_BATTERY & charger->fault)
> >> +			val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
> >> +		else if (MP2629_FAULT_THERMAL & charger->fault)
> >> +			val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
> >> +		else if (MP2629_FAULT_INPUT & charger->fault)
> >> +			val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
> >> +		break;
> >> +
> >> +	case POWER_SUPPLY_PROP_STATUS:
> >> +		ret = regmap_read(info->regmap, MP2629_REG_STATUS, &rval);
> >> +		if (ret)
> >> +			break;
> >> +
> >> +		rval = (rval & MP2629_MASK_CHARGE_TYPE) >> 3;
> >> +		switch (rval) {
> >> +		case 0x00:
> >> +			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
> >> +			break;
> >> +		case 0x01:
> >> +		case 0x10:
> >> +			val->intval = POWER_SUPPLY_STATUS_CHARGING;
> >> +			break;
> >> +		case 0x11:
> >> +			val->intval = POWER_SUPPLY_STATUS_FULL;
> >> +		}
> >> +		break;
> >> +
> >> +	case POWER_SUPPLY_PROP_CHARGE_TYPE:
> >> +		ret = regmap_read(info->regmap, MP2629_REG_STATUS, &rval);
> >> +		if (ret)
> >> +			break;
> >> +
> >> +		rval = (rval & MP2629_MASK_CHARGE_TYPE) >> 3;
> >> +		switch (rval) {
> >> +		case 0x00:
> >> +			val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
> >> +			break;
> >> +		case 0x01:
> >> +			val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
> >> +			break;
> >> +		case 0x10:
> >> +			val->intval = POWER_SUPPLY_CHARGE_TYPE_STANDARD;
> >> +			break;
> >> +		default:
> >> +			val->intval = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
> >> +		}
> >> +		break;
> >> +
> >> +	default:
> >> +		return -EINVAL;
> >> +	}
> >> +
> >> +	return ret;
> >> +}
> >> +
> >> +static int mp2629_charger_battery_set_prop(struct power_supply *psy,
> >> +					enum power_supply_property psp,
> >> +					const union power_supply_propval *val)
> >> +{
> >> +	struct mp2629_charger *charger = dev_get_drvdata(psy->dev.parent);
> >> +	int ret;
> >> +
> >> +	switch (psp) {
> >> +	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
> >> +		ret = mp2629_set_prop(charger, TERM_CURRENT, val);
> >> +		break;
> >> +
> >> +	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
> >> +		ret = mp2629_set_prop(charger, PRECHARGE, val);
> >> +		break;
> >> +
> >> +	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
> >> +		ret = mp2629_set_prop(charger, CHARGE_VLIM, val);
> >> +		break;
> >> +
> >> +	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> >> +		ret = mp2629_set_prop(charger, CHARGE_ILIM, val);
> >> +		break;
> >> +
> >> +	default:
> >> +		return -EINVAL;
> >> +	}
> >> +
> >> +	return ret;
> >> +}
> >> +
> >> +static int mp2629_charger_usb_get_prop(struct power_supply *psy,
> >> +				enum power_supply_property psp,
> >> +				union power_supply_propval *val)
> >> +{
> >> +	struct mp2629_charger *charger = dev_get_drvdata(psy->dev.parent);
> >> +	struct mp2629_info *info = charger->info;
> >> +	unsigned int rval;
> >> +	int ret;
> >> +
> >> +	switch (psp) {
> >> +	case POWER_SUPPLY_PROP_ONLINE:
> >> +		ret = regmap_read(info->regmap, MP2629_REG_STATUS, &rval);
> >> +		if (!ret)
> >> +			val->intval = !!(rval & MP2629_MASK_INPUT_TYPE);
> >> +		break;
> >> +
> >> +	case POWER_SUPPLY_PROP_USB_TYPE:
> >> +		ret = regmap_read(info->regmap, MP2629_REG_STATUS, &rval);
> >> +		if (ret)
> >> +			break;
> >> +
> >> +		rval = (rval & MP2629_MASK_INPUT_TYPE) >> 5;
> >> +		switch (rval) {
> >> +		case MP2629_SOURCE_TYPE_SDP:
> >> +			val->intval = POWER_SUPPLY_USB_TYPE_SDP;
> >> +			break;
> >> +		case MP2629_SOURCE_TYPE_CDP:
> >> +			val->intval = POWER_SUPPLY_USB_TYPE_CDP;
> >> +			break;
> >> +		case MP2629_SOURCE_TYPE_DCP:
> >> +			val->intval = POWER_SUPPLY_USB_TYPE_DCP;
> >> +			break;
> >> +		case MP2629_SOURCE_TYPE_OTG:
> >> +			val->intval = POWER_SUPPLY_USB_TYPE_PD_DRP;
> >> +			break;
> >> +		default:
> >> +			val->intval = POWER_SUPPLY_USB_TYPE_UNKNOWN;
> >> +			break;
> >> +		}
> >> +		break;
> >> +
> >> +	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> >> +		ret = mp2629_read_adc(charger, MP2629_INPUT_VOLT, val);
> >> +		break;
> >> +
> >> +	case POWER_SUPPLY_PROP_CURRENT_NOW:
> >> +		ret = mp2629_read_adc(charger, MP2629_INPUT_CURRENT, val);
> >> +		break;
> >> +
> >> +	case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
> >> +		ret = mp2629_get_prop(charger, INPUT_VLIM, val);
> >> +		break;
> >> +
> >> +	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> >> +		ret = mp2629_get_prop(charger, INPUT_ILIM, val);
> >> +		break;
> >> +
> >> +	default:
> >> +		return -EINVAL;
> >> +	}
> >> +
> >> +	return ret;
> >> +}
> >> +
> >> +static int mp2629_charger_usb_set_prop(struct power_supply *psy,
> >> +				enum power_supply_property psp,
> >> +				const union power_supply_propval *val)
> >> +{
> >> +	struct mp2629_charger *charger = dev_get_drvdata(psy->dev.parent);
> >> +	int ret;
> >> +
> >> +	switch (psp) {
> >> +	case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
> >> +		ret = mp2629_set_prop(charger, INPUT_VLIM, val);
> >> +		break;
> >> +
> >> +	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> >> +		ret = mp2629_set_prop(charger, INPUT_ILIM, val);
> >> +		break;
> >> +
> >> +	default:
> >> +		return -EINVAL;
> >> +	}
> >> +
> >> +	return ret;
> >> +}
> >> +
> >> +static int mp2629_charger_battery_prop_writeable(struct power_supply *psy,
> >> +				     enum power_supply_property psp)
> >> +{
> >> +	return (psp == POWER_SUPPLY_PROP_PRECHARGE_CURRENT ||
> >> +		psp == POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT ||
> >> +		psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT ||
> >> +		psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE);
> >> +}
> >> +
> >> +static int mp2629_charger_usb_prop_writeable(struct power_supply *psy,
> >> +				     enum power_supply_property psp)
> >> +{
> >> +	return (psp == POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT ||
> >> +		psp == POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT);
> >> +}
> >> +
> >> +static void mp2629_charger_work(struct work_struct *work)
> >> +{
> >> +	struct mp2629_charger *charger;
> >> +	struct mp2629_info *info;
> >> +	unsigned int rval;
> >> +	int ret;
> >> +
> >> +	charger = container_of(work, struct mp2629_charger, charger_work);
> >> +	info = charger->info;
> >> +
> >> +	mutex_lock(&charger->lock);
> >> +
> >> +	ret = regmap_read(info->regmap, MP2629_REG_FAULT, &rval);
> >> +	if (ret)
> >> +		goto unlock;
> >> +
> >> +	if (rval) {
> >> +		charger->fault = rval;
> >> +		if (MP2629_FAULT_BATTERY & rval)
> >> +			dev_err(info->dev, "Battery fault OVP");
> >> +		else if (MP2629_FAULT_THERMAL & rval)
> >> +			dev_err(info->dev, "Thermal shutdown fault");
> >> +		else if (MP2629_FAULT_INPUT & rval)
> >> +			dev_err(info->dev, "no input or input OVP");
> >> +		else if (MP2629_FAULT_OTG & rval)
> >> +			dev_err(info->dev, "VIN overloaded");
> >> +
> >> +		goto unlock;
> >> +	}
> >> +
> >> +	ret = regmap_read(info->regmap, MP2629_REG_STATUS, &rval);
> >> +	if (ret)
> >> +		goto unlock;
> >> +
> >> +	if (rval & MP2629_INPUTSOURCE_CHANGE)
> >> +		power_supply_changed(charger->usb);
> >> +	else if (rval & MP2629_CHARGING_CHANGE)
> >> +		power_supply_changed(charger->battery);
> >> +
> >> +unlock:
> >> +	mutex_unlock(&charger->lock);
> >> +}
> >> +
> >> +static irqreturn_t mp2629_irq_handler(int irq, void *dev_id)
> >> +{
> >> +	struct mp2629_charger *charger = dev_id;
> >> +
> >> +	schedule_work(&charger->charger_work);
> >> +	return IRQ_HANDLED;
> >> +}
> >> +
> >> +static const struct power_supply_desc mp2629_usb_desc = {
> >> +	.name		= "mp2629_usb",
> >> +	.type		= POWER_SUPPLY_TYPE_USB,
> >> +	.usb_types      = mp2629_usb_types,
> >> +	.num_usb_types  = ARRAY_SIZE(mp2629_usb_types),
> >> +	.properties	= mp2629_charger_usb_props,
> >> +	.num_properties	= ARRAY_SIZE(mp2629_charger_usb_props),
> >> +	.get_property	= mp2629_charger_usb_get_prop,
> >> +	.set_property	= mp2629_charger_usb_set_prop,
> >> +	.property_is_writeable = mp2629_charger_usb_prop_writeable,
> >> +};
> >> +
> >> +static const struct power_supply_desc mp2629_battery_desc = {
> >> +	.name		= "mp2629_battery",
> >> +	.type		= POWER_SUPPLY_TYPE_BATTERY,
> >> +	.properties	= mp2629_charger_bat_props,
> >> +	.num_properties	= ARRAY_SIZE(mp2629_charger_bat_props),
> >> +	.get_property	= mp2629_charger_battery_get_prop,
> >> +	.set_property	= mp2629_charger_battery_set_prop,
> >> +	.property_is_writeable = mp2629_charger_battery_prop_writeable,
> >> +};
> >> +
> >> +static ssize_t batt_impedance_compensation_show(struct device *dev,
> >> +					   struct device_attribute *attr,
> >> +					   char *buf)
> >> +{
> >> +	struct mp2629_charger *charger = dev_get_drvdata(dev->parent);
> >> +	struct mp2629_info *info = charger->info;
> >> +	unsigned int rval;
> >> +	int ret;
> >> +
> >> +	ret = regmap_read(info->regmap, MP2629_REG_IMPEDANCE_COMP, &rval);
> >> +	if (ret < 0)
> >> +		return ret;
> >> +
> >> +	rval = (rval >> 4) * 10;
> >> +
> >> +	return scnprintf(buf, PAGE_SIZE, "%d mohm\n", rval);
> >> +}
> >> +
> >> +static ssize_t batt_impedance_compensation_store(struct device *dev,
> >> +					    struct device_attribute *attr,
> >> +					    const char *buf,
> >> +					    size_t count)
> >> +{
> >> +	struct mp2629_charger *charger = dev_get_drvdata(dev->parent);
> >> +	struct mp2629_info *info = charger->info;
> >> +	long val;
> >> +	int ret;
> >> +
> >> +	ret = kstrtol(buf, 10, &val);
> >> +	if (ret < 0)
> >> +		return ret;
> >> +
> >> +	if (val < 0 && val > 140)
> >> +		return -ERANGE;
> >> +
> >> +	/* multiples of 10 mohm so round off */
> >> +	val = val / 10;
> >> +	ret = regmap_update_bits(info->regmap, MP2629_REG_IMPEDANCE_COMP,
> >> +					MP2629_MASK_IMPEDANCE, val << 4);
> >> +	if (ret < 0)
> >> +		return ret;
> >> +
> >> +	return count;
> >> +}
> >> +
> >> +static DEVICE_ATTR_RW(batt_impedance_compensation);
> >> +
> >> +static struct attribute *mp2629_charger_sysfs_attrs[] = {
> >> +	&dev_attr_batt_impedance_compensation.attr,
> >> +	NULL
> >> +};
> >> +ATTRIBUTE_GROUPS(mp2629_charger_sysfs);
> >> +
> >> +static int mp2629_charger_probe(struct platform_device *pdev)
> >> +{
> >> +	struct device *dev = &pdev->dev;
> >> +	struct mp2629_charger *charger;
> >> +	struct mp2629_info *info = dev_get_drvdata(dev->parent);
> >> +	struct power_supply_config psy_cfg = {0};
> >> +	int ret, i;
> >> +
> >> +	charger = devm_kzalloc(dev, sizeof(*charger), GFP_KERNEL);
> >> +	if (!charger)
> >> +		return -ENOMEM;
> >> +
> >> +	platform_set_drvdata(pdev, charger);
> >> +	charger->info = info;
> >> +	charger->dev = dev;
> >> +
> >> +	for (i = 0; i <= TERM_CURRENT; i++) {
> >> +		charger->regmap_fields[i] = devm_regmap_field_alloc(dev,
> >> +					info->regmap, mp2629_reg_fields[i]);
> >> +		if (IS_ERR(charger->regmap_fields[i])) {
> >> +			dev_err(dev, "regmap field alloc fail %d\n", i);
> >> +			return PTR_ERR(charger->regmap_fields[i]);
> >> +		}
> >> +	}
> >> +
> >> +	for (i = 0; i < MP2629_ADC_CHAN_END; i++) {
> >> +		charger->iiochan[i] = iio_channel_get(dev, adc_chan_name[i]);
> >> +		if (IS_ERR(charger->iiochan[i])) {
> >> +			ret = PTR_ERR(charger->iiochan[i]);
> >> +			goto iio_fail;
> >> +		}
> >> +	}
> >> +
> >> +	charger->usb = devm_power_supply_register(dev, &mp2629_usb_desc, NULL);
> >> +	if (IS_ERR(charger->usb)) {
> >> +		ret = PTR_ERR(charger->usb);
> >> +		goto iio_fail;
> >> +	}
> >> +
> >> +	psy_cfg.drv_data = charger;
> >> +	psy_cfg.attr_grp = mp2629_charger_sysfs_groups;
> >> +	charger->battery = devm_power_supply_register(dev,
> >> +					 &mp2629_battery_desc, &psy_cfg);
> >> +	if (IS_ERR(charger->battery)) {
> >> +		ret = PTR_ERR(charger->battery);
> >> +		goto iio_fail;
> >> +	}
> >> +
> >> +	ret = regmap_update_bits(info->regmap, MP2629_REG_CHARGE_CTRL,
> >> +					MP2629_MASK_CHARGE_CTRL, BIT(4));
> >> +	if (ret) {
> >> +		dev_err(dev, "enable charge fail: %d\n", ret);
> >> +		goto iio_fail;
> >> +	}
> >> +
> >> +	regmap_update_bits(info->regmap, MP2629_REG_TIMER_CTRL,
> >> +					MP2629_MASK_WDOG_CTRL, 0);
> >> +
> >> +	INIT_WORK(&charger->charger_work, mp2629_charger_work);
> >> +	mutex_init(&charger->lock);
> >> +
> >> +	if (info->irq) {
> >> +		ret = devm_request_irq(dev, info->irq, mp2629_irq_handler,
> >> +				 IRQF_TRIGGER_RISING, "mp2629-charger",
> >> +				 charger);
> >> +		if (ret) {
> >> +			dev_info(dev, "failed to request gpio IRQ\n");
> >> +			goto iio_fail;
> >> +		}
> >> +	}
> >> +
> >> +	regmap_update_bits(info->regmap, MP2629_REG_INTERRUPT,
> >> +				GENMASK(6, 5), (BIT(6) | BIT(5)));
> >> +
> >> +	return 0;
> >> +
> >> +iio_fail:
> >> +	while (i--)
> >> +		iio_channel_release(charger->iiochan[i]);
> >> +
> >> +	dev_err(dev, "driver register fail: %d\n", ret);
> >> +	return ret;
> >> +}
> >> +
> >> +static int mp2629_charger_remove(struct platform_device *pdev)
> >> +{
> >> +	struct mp2629_charger *charger = platform_get_drvdata(pdev);
> >> +	struct mp2629_info *info = charger->info;
> >> +	int i;
> >> +
> >> +	cancel_work_sync(&charger->charger_work);
> >> +
> >> +	for (i = 0; i < MP2629_ADC_CHAN_END; i++)
> >> +		iio_channel_release(charger->iiochan[i]);
> >> +
> >> +	regmap_update_bits(info->regmap, MP2629_REG_CHARGE_CTRL,
> >> +					MP2629_MASK_CHARGE_CTRL, 0);
> >> +	return 0;
> >> +}
> >> +
> >> +static const struct of_device_id mp2629_charger_of_match[] = {
> >> +	{ .compatible = "mps,mp2629_charger"},
> >> +	{}
> >> +};
> >> +MODULE_DEVICE_TABLE(of, mp2629_charger_of_match);
> >> +
> >> +static struct platform_driver mp2629_charger_driver = {
> >> +	.driver = {
> >> +		.name = "mp2629_charger",
> >> +		.of_match_table = mp2629_charger_of_match,
> >> +	},
> >> +	.probe		= mp2629_charger_probe,
> >> +	.remove		= mp2629_charger_remove,
> >> +};
> >> +module_platform_driver(mp2629_charger_driver);
> >> +
> >> +MODULE_AUTHOR("Saravanan Sekar <sravanhome@xxxxxxxxx>");
> >> +MODULE_DESCRIPTION("MP2629 Charger driver");
> >> +MODULE_LICENSE("GPL");  




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux